3.4L heating issues
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: Cleveland, OH
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
3.4L heating issues
My 2000 4runner is having heating issues, this morning I went to get into my truck after letting it warm up for about 15 minutes. It was blowing cold air but as soon as I started moving it would get warmer, I know my radiator has a small leak, and my thermostat and water pump were changed about 25K ago. Coolant was low this afternoon so I added some to it to fill it up, and its still blowing cold at idle I plan on changing my radiator Saturday, and anything else that I should look at while the radiator is out?
Anyone have any ideas about what it could be?
Anyone have any ideas about what it could be?
#4
Registered User
Maybe it's just clogged a little. You could try taking the inlet nd outlet hooses off from the firewall and shoot a garden hose in there (both ways). That could clear out a blockage without having to spend a weekend taking the dash apart and putting it all back together.
Thread
Thread Starter
Forum
Replies
Last Post
Seattle_Sign_Guy
95.5-2004 Tacomas & 96-2002 4Runners
0
07-12-2015 12:38 PM