rustED's 87' 4Runner Build
#241
I have never had a bad Cold Start Injector but have changed several CSI Timing Switches. Sometimes getting the scaling off of the sensor will fix the problem or times the sensor will not pass a resistance check and needs replaced. Anytime I am at the bone yard and see a Timing Switch, I will grab it. It is one sensor that does tend to fail. I have learned a lot on these threads.
How you making out on your Ford truck? I finally got a 76 Super Cab. It has a 460 in it. Takes up too much room and I thinking of going with a 300/6 with a manual transmission. 460 is going to be a gas hog. What would be your suggestion on the 300 with manual transmission? Think it will tow heavy loads? I not looking to win any races but want a heavy tow rig.
How you making out on your Ford truck? I finally got a 76 Super Cab. It has a 460 in it. Takes up too much room and I thinking of going with a 300/6 with a manual transmission. 460 is going to be a gas hog. What would be your suggestion on the 300 with manual transmission? Think it will tow heavy loads? I not looking to win any races but want a heavy tow rig.
I haven't worked on my ford at all lately, haven't really driven it much, hoping to get back to working on it next summer. The 300/6 is a great motor, my dad has had several of them and always liked them. I've only had one, it was in my 2wd 96' ford f150 and it had a manuel 5spd. Mine was fuel injected, I only had it for about a year and a half and never towed anything with it, I ended up selling it to fund my 86' 4runner build. From what I've heard there are some easy mods to get a little more power out of them, they have good bottom end torque and can tow well, and can get decent gas mileage out of them, they're just not very fast, but that doesn't sound like it would be an issue for you. I saw a 76' crewcab 3/4 ton 4x4 on Craigslist last week that had a 300/6 and 4 spd manuel trans. He was asking $5000 for it, I wanted that truck so bad!!! Sold the same day. Some day I will get a crew cab, there getting harder to find and alot of money for one in descent shape.
Dang, that sucks about the deer ed. That was 80% of my motivation for a nice front bumper, i'm scared to death of hitting an animal at 80mph.
Hope you figure out the cold-start issues. seems like the electronics on the 22re are a little finicky. My DD starts up great even in below zero, but it idle's rough once warmed up. i've been trying to figure out that gremlin for a year now
Hope you figure out the cold-start issues. seems like the electronics on the 22re are a little finicky. My DD starts up great even in below zero, but it idle's rough once warmed up. i've been trying to figure out that gremlin for a year now
Last edited by rustED; 12-02-2016 at 12:06 AM.
#242
Registered User
My bumper was made by FROR (front range offroad) but they are discontinued. I've heard from a few people that they like it, i'm not sure why they discontinued it.
#243
Anybody else getting any snow? We had over a foot of snow accumulated so far this year then got another 10 to 12" in the last 24hrs...looks like it supposed to snow more through out the week. Side note, I'm loving the BFG KO2's, this is my 2nd winter with them and they do awesome in the snow, if I had selectable lockers and some more ground clearance this thing would probably go anywhere.
#245
Sorry Robb, didn't me to steal all your snow, lol. I figured you would have gotten your share of it by now! We get alot more of it living here in Colville than when we lived in Yakima.
Couple pics of the kids playing today, pulled them in the sled behind the runner, then my wife pulled me and the kids...she's a little rusty driving a stick, had me a little scared a couple times, lol.
Couple pics of the kids playing today, pulled them in the sled behind the runner, then my wife pulled me and the kids...she's a little rusty driving a stick, had me a little scared a couple times, lol.
#247
Super Moderator
Staff
iTrader: (1)
Join Date: Aug 2008
Location: Anderson Missouri
Posts: 11,788
Likes: 0
Received 21 Likes
on
19 Posts
Looks like you guys had a great time. The kids will remember being pulled behind the runner years down the road and will be some great memories for them. Looks like you got all the snow in your area. We only got one light snow this year.
#248
I agree Terry, I remember doing similar things when we were kids. We used to use an old 50 chevy pickup hood for a sled, it worked great, but was kinda heavy to pull back up the hills! My kids like being pulled behind my 87' 4runner better than when I used to pull them behind my old 86' I had. I used to throw too much snow on them with the wider 35's and the extra power of the V8, lol.
Last edited by rustED; 04-10-2017 at 05:20 PM.
#249
So we got our tax refund awhile back. I was ready to pull the trigger on a used hood, fender and miscellaneous front end parts to repair my 4runner from when I hit the deer last year, but the guy never got back to me. It gave me some time to think, and I decided to use that money and invest in some tools instead. I've done some projects in the past that included the use of alot of sheetmetal, so I bought some tools that should make some future projects easier, as well as more fun and hopefully with more professional looking results. To make cutting large sheets easier I bought some electric cutting shears from Harbor Freight. They had good reviews, were rated for up to 14 gauge thickness and only cost $50 so I gave them a shot. So far I'm very impressed, they cut and leave a smooth edge, and don't distort the metal at all, Alot easier, cleaner and faster than my old method of using a grinder and skinny wheel! I've tried them on 16 gauge and they cut through it like butter!
I also got a 20 ton hydraulic shop press. I'm in the process of making a couple different press brakes for it. I also want to eventually get some dimple dies to use with it. The last tool I got was a Woodward Fab beadroller. It came with 6 sets of dies. I need to build a stand for it and want to make a few modifications to it, including adding a reversable motor and foot pedal to it eventually.
^^^Here's the shears I bought
^^^Here's the press I picked up off CL. I added new guides made out of uhmw to take the back and forth play out of it. Pic also shows my 90° press brake I'm building.
^^^another shot of the brake
^^^Here's a couple test bends with the 90° brake
I made this nice curved radius bend just using a peice of pipe and some C channel...those will be the components I use for the next bending brake I build.
Here's one of the beadroller, can't wait to start using it!
^^^I just bought two 4'×5' sheets of 18 gauge sheetmetal, I think my first project is going to be making some new cargo panels and doors for the the interior.
.
I also got a 20 ton hydraulic shop press. I'm in the process of making a couple different press brakes for it. I also want to eventually get some dimple dies to use with it. The last tool I got was a Woodward Fab beadroller. It came with 6 sets of dies. I need to build a stand for it and want to make a few modifications to it, including adding a reversable motor and foot pedal to it eventually.
^^^Here's the shears I bought
^^^Here's the press I picked up off CL. I added new guides made out of uhmw to take the back and forth play out of it. Pic also shows my 90° press brake I'm building.
^^^another shot of the brake
^^^Here's a couple test bends with the 90° brake
I made this nice curved radius bend just using a peice of pipe and some C channel...those will be the components I use for the next bending brake I build.
Here's one of the beadroller, can't wait to start using it!
^^^I just bought two 4'×5' sheets of 18 gauge sheetmetal, I think my first project is going to be making some new cargo panels and doors for the the interior.
.
Last edited by rustED; 04-10-2017 at 06:48 PM.
#251
Registered User
Join Date: Jan 2015
Location: Hendersonville NC
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
I bought those same shears. They work pretty well. I was able to cut rough patches and shape them with a grinder and flap disc. Here is an example of one of the tougher ones i made.
#252
Hey Tony, I'm looking forward to playing with the new tools. Hopefully the weather will warm up so I can get some good practice in here pretty quick, it's been really cold again the last couple days, was snowing again yesterday...makes me want to move down to your neck of the woods, or uh..beach, lol.
I'm glad you have had good results with those shears, I'm always a little skeptical when reading reviews on a tools, but thought I'd give them a shot.
.
.
Last edited by rustED; 04-11-2017 at 10:28 AM.
#253
Registered User
wow your shop is coming along nicely, can i come stay for a weekend? haha.
Looking forward to your new rear cargo panels, i need some ideas! i want to build a sub into 1 side and then make both rear panels out of aluminum
Looking forward to your new rear cargo panels, i need some ideas! i want to build a sub into 1 side and then make both rear panels out of aluminum
#254
Here's a couple pics of where I'm at with my driverside cargo panel, I still have work to do on it, and need to cut out for the door. I'm thinking of doing the tailgate cover to match, and will also be building a new locking center console/armrest/cupholder too.
#256
Registered User
Join Date: Aug 2014
Location: Reno/Elko, Nevada
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Looks aewsome man, I need to do the same, but I'll be rubbing the rear of mine soon for long travel and bypass shocks to fit through. So that project will have to wait.
Hey buddy you're welcome to stay anytime, ha,ha. The built in sub enclosure would be cool! I wanted to use aluminum for the panels too, but thought it would be a good idea to get some practice in using the beadroller on some less expensive materials first. The 4x5' sheet of 18 gauge was around $43, I haven't priced aluminum yet, but have a feeling it's going to expensive.
Here's a couple pics of where I'm at with my driverside cargo panel, I still have work to do on it, and need to cut out for the door. I'm thinking of doing the tailgate cover to match, and will also be building a new locking center console/armrest/cupholder too.
Here's a couple pics of where I'm at with my driverside cargo panel, I still have work to do on it, and need to cut out for the door. I'm thinking of doing the tailgate cover to match, and will also be building a new locking center console/armrest/cupholder too.
#258
Thanks Mark, Its nice having some new tools, makes life alot easier! I don't think I need anything plasma cut on this project, but I might have to take you up on that offer on a future project, thanks man!
#259
I only had a couple of hours today, so I worked on my beadroller a little bit. From what I've come across in my research when I was looking to buy an affordable beadroller is that the lesser expensive ones tend to flex when rolling a bead. This is because they started making the frame from 3/8" thick steel plate, some of the older harbor freight and Woodward Fab units used to be made of 1/2" thick plate. This causes some distortion in the bead on the panel and less than desirable results, because the male and female dies aren't staying in consistent alignment. An easy fix is welding some additional plate or in my case square tubing to stiffen up the beadroller frame. I had some 2"x2" x 1/4" wall square tubing laying around, so that's what I used, kind of overkill, this sucker is real heavy, but should work alot better.
^^^These pics show it upside down, that 4" stub I left sticking out will be where I mount it to a stand.
^^^Right side up and re-assembled. I have a couple more mods to do before I break it back down to paint...if the weather ever warms up enough for me to paint :/
^^^These pics show it upside down, that 4" stub I left sticking out will be where I mount it to a stand.
^^^Right side up and re-assembled. I have a couple more mods to do before I break it back down to paint...if the weather ever warms up enough for me to paint :/
Last edited by rustED; 04-18-2017 at 04:48 PM.
#260
Registered User
iTrader: (1)
Join Date: Oct 2010
Location: N of Okechobee Florida
Posts: 1,002
Likes: 0
Received 4 Likes
on
4 Posts
Heavy is right. That little Woodward Fab shear I have is heavy. Your gonna need to fabricate a forklift to move your tools around. Great modification by the way. Have you thought anymore about doing the floorpans?