Joedarr33's 1991 toyota pickup sr5 ext cab build
#1
Registered User
Thread Starter
Joedarr33's 1991 toyota pickup sr5 ext cab build
Price 2600 - from my brother.
has new bed with rhino liner. and new front fenders
interior was and still is clean as hell
power windows power door locks power mirrors (that dont work) and a sunroof.
needed some odds and ends but overall was in great shape.
had 148xxx when i got it
has about 150xxx on it now
My name is Joe to start out with. Im 19. and from the Northern Va area.
1991 toyota pickup sr5
Since i got it i have done -
Starter
pinion seal
different tires (thornbirds 31x10.50x15)
wiper blades (that kicked my ass because the screws were stripped)
Fully synthetic oil change
cb radio with pa speaker
plasti dipped all chrome black
fox stickers
removed rear bumper
new blower motor resistor (would only work on hi)
mag lite mod
On the way-
ignition switch (ordered)
breather tube mod (stuff ordered)
Future-
new 31x10.50x15 bfg km2's
paint
addicted front bumper possibly
It has some rust on the corners of the doors that im trying to get my budy who does body work for a living to help me fix it and throw some paint on it when he has time.
i put a new starter in it and it didnt fix my problem. the truck will click once when i turn to start it but just doesnt do anything else. I am going to try an ignition switch and hope that works. if not ill try something else haha.
this is how it looked when i got it-
how it looks as its progressed-
has new bed with rhino liner. and new front fenders
interior was and still is clean as hell
power windows power door locks power mirrors (that dont work) and a sunroof.
needed some odds and ends but overall was in great shape.
had 148xxx when i got it
has about 150xxx on it now
My name is Joe to start out with. Im 19. and from the Northern Va area.
1991 toyota pickup sr5
Since i got it i have done -
Starter
pinion seal
different tires (thornbirds 31x10.50x15)
wiper blades (that kicked my ass because the screws were stripped)
Fully synthetic oil change
cb radio with pa speaker
plasti dipped all chrome black
fox stickers
removed rear bumper
new blower motor resistor (would only work on hi)
mag lite mod
On the way-
ignition switch (ordered)
breather tube mod (stuff ordered)
Future-
new 31x10.50x15 bfg km2's
paint
addicted front bumper possibly
It has some rust on the corners of the doors that im trying to get my budy who does body work for a living to help me fix it and throw some paint on it when he has time.
i put a new starter in it and it didnt fix my problem. the truck will click once when i turn to start it but just doesnt do anything else. I am going to try an ignition switch and hope that works. if not ill try something else haha.
this is how it looked when i got it-
how it looks as its progressed-
Last edited by Joedarr33; 10-21-2012 at 07:12 PM.
#3
Registered User
Thread Starter
My brother has been building a 92 yota pickup extended cab for about 6 years now. It's lifted about 14 or so inches with 41's , baja fenders, sas, and an lt1 motor. The motor was to big for an actual performance type or any type of radiator to fit in the engine bay so it was going where that thing is. This bed came off the truck because he is going to just end up putting Baja sides on when he gets around to finishing it.
But anyways, I love this truck lol
I don't want to really lift it, I just want to do stuff that will help practical wise. Such as the extra fuse box and hooking up some extra 12v sources. And maybe eventually cut the thing out of the bed so I can fit a bed tent in there.
But anyways, I love this truck lol
I don't want to really lift it, I just want to do stuff that will help practical wise. Such as the extra fuse box and hooking up some extra 12v sources. And maybe eventually cut the thing out of the bed so I can fit a bed tent in there.
Thread
Thread Starter
Forum
Replies
Last Post
zd92655
86-95 Trucks & 4Runners
9
03-06-2022 12:58 PM
6th Gear
84-85 Trucks & 4Runners (Build-Up Section)
19
12-10-2019 07:31 AM
Aleeex_u
86-95 Trucks & 4Runners
10
06-05-2016 06:52 PM