bruno4turbo 1986 pickup build up thread
#261
Registered User
Thread Starter
Hey guys, nothing really new with my yota, just been working a lot. Planning a Hollister hills trip on the 25th, so I'll get some pictures up
#263
Registered User
Thread Starter
Some of the group last weekend hitting one of the trails
A nice little pose from turbo
The hole was deepper than it looked
He was traveling in a pack of jeeps but he didnt fool me for a second
Plop
#265
Registered User
Thread Starter
picture heavy I've done quite a few mods to my truck. about 8 months ago my bf and I made a "flat" bed for my truck
cleaning the frame up after removing the old bed. there is only 6 bolts that hold the bed down, fuel filler neck (3 screws) and the tail lights - very easy to remove
setting up the main frame of the bed
bobbed the end of the bed
setting up the sides
making sure the lights fit
the tabs my bf designed and cut with a water jet
the finished product
cleaning the frame up after removing the old bed. there is only 6 bolts that hold the bed down, fuel filler neck (3 screws) and the tail lights - very easy to remove
setting up the main frame of the bed
bobbed the end of the bed
setting up the sides
making sure the lights fit
the tabs my bf designed and cut with a water jet
the finished product
#267
Registered User
Thread Starter
did a solid axle swap a year ago sorry for late pictures just totally neglected my yotatech account
Unbolt IFS
Torch off brackets
grind smooth
plate for engine mount provided
Sorry no photos of rebuilding front axle, just followed Lowrangeoffroad's youtube tutorials
loosly bolt everything in
set up steering
check ride height and shackle angle
Torch off brackets
grind smooth
plate for engine mount provided
Sorry no photos of rebuilding front axle, just followed Lowrangeoffroad's youtube tutorials
loosly bolt everything in
set up steering
check ride height and shackle angle
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM