FS[PacSouthWest]: Parting out my 1993 4runner...
#1
Registered User
Thread Starter
Parting out my 1993 4runner...
I can't get my 4runner to pass smog so I'm thinking about buying another and parting this one out.
Anyone interested in anything? The suspension, gears, and exhaust are spoken for. I'll have a better list of what's available as soon as we start tearing into both of them. I will be shipping from 94018
Anyone interested in anything? The suspension, gears, and exhaust are spoken for. I'll have a better list of what's available as soon as we start tearing into both of them. I will be shipping from 94018
Last edited by jeffe; 02-04-2014 at 01:50 AM.
#5
If its the same interior color as mine, I would be interested in the console and maybe the gear shifter knob if its in decent shape?
Sorry for the double, post internet is glitching bad.
Sorry for the double, post internet is glitching bad.
Last edited by khoffrunner; 10-04-2013 at 07:06 AM.
#7
is it 4wd, with a front double cardan driveshaft? if so, and the cv section is in good shape, consider hanging on to it for future use... they can be expensive, difficult to repair, and hard to come by.
i just pulled one of these shafts off of a junkyard 4runner yesterday, don't know the year, but it had a 3slo in it.
i just pulled one of these shafts off of a junkyard 4runner yesterday, don't know the year, but it had a 3slo in it.
Trending Topics
#9
Registered User
Thread Starter
Sorry for posting in the wrong section! I haven't had a chance to get over to the truck and take pics yet. I did buy another rig though. Gonna work on my plan of action for building one nice rig out of two.
The new truck is a 1990 4dr 4x4 3.0 5spd.
The old truck is basically the same thing just a 1993.
Any help on whats interchangeable and whats not would be highly appreciated.
The only FSM's I've been able to find are for a 1995 model year.
The new truck is a 1990 4dr 4x4 3.0 5spd.
The old truck is basically the same thing just a 1993.
Any help on whats interchangeable and whats not would be highly appreciated.
The only FSM's I've been able to find are for a 1995 model year.
#10
Hi,
I'm looking for the lower sheet metal plate that sits between the engine block and the bellhousing, and the clutch hardline (the one over the firewall) between the clutch master and the slave cylinder.
Let me know what you'd want for them shipped to 95492.
Thanks
I'm looking for the lower sheet metal plate that sits between the engine block and the bellhousing, and the clutch hardline (the one over the firewall) between the clutch master and the slave cylinder.
Let me know what you'd want for them shipped to 95492.
Thanks
#18
Registered User
I need the following parts if they are in good running condition;
1. Radiator fan and clutch
2. Radiator fan shroud
3. R150f crossmember
Let me know.
Thanks.
1. Radiator fan and clutch
2. Radiator fan shroud
3. R150f crossmember
Let me know.
Thanks.