LOS ANGELES CA: Selling a couple of pieces off my 1989 4Runner
#1
Registered User
Thread Starter
I'm selling a few of the things i took off of my truck once i went the SAS route and Higher 4" lift. If you guys are interested please send me a Private Message and i'd be happy to work out a payment via Paypal or local pickup for ya. S&H will all be on your Tab. and i'll try to wrap everything up as best as i can.
Like the Ad states i am in the Los Angeles CA area. I'd prefer to work with local pickups only at least for the tires/rims, valance, and might possibly ship out the leaf springs. Send me a PM and we'll see what we can work out. (I WILL ONLY SHIP ITEMS OUT ONCE PAYMENT HAS GONE THROUGH! via PAYAL)
If you want a specific zip code to my location it is 90255
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
2-3" lift kit(front and rear) for a SFA or SAS's truck/4runner $250 They are used and are settled. Still work fine only reason i'm getting rid of them is because i upgraded to a real 4" AllPro lift leaf springs. These dont require new welding of spring hangers for the rear. It will bolt right on to your stock ones. Will not separate. $200
Note: not sure if it will sag for a pickup, but it did have a slight sag on the rear of my truck due to the hard top, tire in the bed, roof rack and cargo in the rear. I'm sure this problem can be quickly fixed by adding blocks or another leaf in the springs like i did to my current leaf springs to even it out.
Here's how my 4runner looked with these springs installed(on 33" tires)
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Bull bar. With light tab. No mounting hardware $80
bottom part mounts onto where the skid plate mounts to and on the front you will need to drill 2 hols through your bumper and use a nut/bolt on each of the 2 holes to mount the front part to the stock bumper.
How it looks on a 85-89 4runner or pickup
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Stock Skid Plate. No hardware $30
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Valance. It's not to my original truck. this one is off a black 4runner. I do have mounting hardware for it as well.
I'm still debating on this piece though. The metal is so thin i don't know how i would go about shipping it safely so i might only make this one available for local pickup $25
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Rear Rancho RS5000 shocks (FREE)
They are used. I bought them off the junkyard for $20 and i'm just giving them away FOR FREE S&H on your tab. If i remember correctly they are 8" of travel when fully extended.
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
And last but not least my old black aluminum 15x7 rims with 31/10.5/15 LEMANS A/T tires Still have plenty of tred left including a spare tire on a stock Toyota spare steel rim. All black rims with Lemans are balanced already. Selling these for $200 for all 5. Will not separate from the rim.
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
These are all old pix of the tires, but they more or less have the same exact amount of tred left. Approx 1/4" deep on all tires and spare is almost brand new. I'll get current pictures of the tires uploaded with tire to Dime or Penny ratio as soon as i get home from work today.
---------------------------------------------------------------------------------------------
**********GUYS PLEASE NOTE YOUR WHOLE ADDRESS IN A PRIVATE MESSAGE**********
Like the Ad states i am in the Los Angeles CA area. I'd prefer to work with local pickups only at least for the tires/rims, valance, and might possibly ship out the leaf springs. Send me a PM and we'll see what we can work out. (I WILL ONLY SHIP ITEMS OUT ONCE PAYMENT HAS GONE THROUGH! via PAYAL)
If you want a specific zip code to my location it is 90255
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
2-3" lift kit(front and rear) for a SFA or SAS's truck/4runner $250 They are used and are settled. Still work fine only reason i'm getting rid of them is because i upgraded to a real 4" AllPro lift leaf springs. These dont require new welding of spring hangers for the rear. It will bolt right on to your stock ones. Will not separate. $200
Note: not sure if it will sag for a pickup, but it did have a slight sag on the rear of my truck due to the hard top, tire in the bed, roof rack and cargo in the rear. I'm sure this problem can be quickly fixed by adding blocks or another leaf in the springs like i did to my current leaf springs to even it out.
Here's how my 4runner looked with these springs installed(on 33" tires)
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Bull bar. With light tab. No mounting hardware $80
bottom part mounts onto where the skid plate mounts to and on the front you will need to drill 2 hols through your bumper and use a nut/bolt on each of the 2 holes to mount the front part to the stock bumper.
How it looks on a 85-89 4runner or pickup
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Stock Skid Plate. No hardware $30
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Valance. It's not to my original truck. this one is off a black 4runner. I do have mounting hardware for it as well.
I'm still debating on this piece though. The metal is so thin i don't know how i would go about shipping it safely so i might only make this one available for local pickup $25
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Rear Rancho RS5000 shocks (FREE)
They are used. I bought them off the junkyard for $20 and i'm just giving them away FOR FREE S&H on your tab. If i remember correctly they are 8" of travel when fully extended.
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
---------------------------------------------------------------------------------------------
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
And last but not least my old black aluminum 15x7 rims with 31/10.5/15 LEMANS A/T tires Still have plenty of tred left including a spare tire on a stock Toyota spare steel rim. All black rims with Lemans are balanced already. Selling these for $200 for all 5. Will not separate from the rim.
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
These are all old pix of the tires, but they more or less have the same exact amount of tred left. Approx 1/4" deep on all tires and spare is almost brand new. I'll get current pictures of the tires uploaded with tire to Dime or Penny ratio as soon as i get home from work today.
---------------------------------------------------------------------------------------------
**********GUYS PLEASE NOTE YOUR WHOLE ADDRESS IN A PRIVATE MESSAGE**********
Last edited by Redeth005; 10-12-2013 at 08:07 PM.
#2
You wouldnt know anybody with a 5speed trans for an 89' runner with a 4cyl efi 22re in the LA area would you.If I didnt need the trans right now I would talk to you about the tires and rims.Thanks
#3
Registered User
Thread Starter
I know somebody who just got one but he's rebuilding it for his own truck. Try checking both Wilmington, Stanton and Anaheim Pick your Part junk yards. 4x4 pickups and 4Runners come in once in a while. You might get lucky.
#6
Registered User
Thread Starter
**********GUYS PLEASE NOTE YOUR WHOLE ADDRESS IN A PRIVATE MESSAGE**********
The local UPS guys can't give me an accurate shipping quote unless I have your full address.
Thank you!
The local UPS guys can't give me an accurate shipping quote unless I have your full address.
Thank you!
#7
Registered User
Thread Starter
Bump!
Shocks, Bull Bar Bumper, and Valance were all sold today!
Skid Plate, Wheels/tires, & Front and rear 2-3" lift Leaf springs are still available.
Thank you guys!
Shocks, Bull Bar Bumper, and Valance were all sold today!
Skid Plate, Wheels/tires, & Front and rear 2-3" lift Leaf springs are still available.
Thank you guys!
Last edited by Redeth005; 06-03-2013 at 07:21 PM.
Trending Topics
#8
Registered User
glad to help an gain parts for my ol'girl
this is the switch we were talking about earlier
http://www.ebay.com/itm/Heavy-Duty-20A-125V-AC-15A-250V-AC-DPST-4-Pole-On-Off-2-Position-Toggle-Switch-/111049610733?pt=LH_DefaultDomain_0&hash=item19db1295ed
this is the switch we were talking about earlier
http://www.ebay.com/itm/Heavy-Duty-20A-125V-AC-15A-250V-AC-DPST-4-Pole-On-Off-2-Position-Toggle-Switch-/111049610733?pt=LH_DefaultDomain_0&hash=item19db1295ed
#10
Registered User
Thread Starter
Outsane I only had those leafs installed on my truck for about 1&1/2 months. But I do know they were used. The guy I bought my front axle off of included them in my purchase.
I was never told how long they had the leafs on their truck for. All i know is that they came off a 85 4x4 toyota pickup
They are Rancho and Rough country leafs. He told me it was for a 4 inch lift but they are more like a 2- 3
They do feel good though. The time I used them they felt pretty smooth. Not hard at all.
I was never told how long they had the leafs on their truck for. All i know is that they came off a 85 4x4 toyota pickup
They are Rancho and Rough country leafs. He told me it was for a 4 inch lift but they are more like a 2- 3
They do feel good though. The time I used them they felt pretty smooth. Not hard at all.
Last edited by Redeth005; 06-04-2013 at 10:08 AM.
#12
Registered User
Thread Starter
#14
Registered User
Thread Starter
Troy, i seen your last few posts have been advertising on mine and another persons for sale ad. If you're trying to post up a for sale thread you're going about it completely wrong. Go back 1-2 pages and click on the "new thread" button and make out your own thread but don't try to hijack or advertise on mine. Based on the amount of posts you have and your join date you might not be allowed to make a new thread yet. Please read the rules section.
#18
Registered User
Thread Starter
Sold the rims and tires today. The only thing I still have for sale off this list are the four 2-3" lift leaf springs for $200
Last edited by Redeth005; 06-22-2013 at 03:15 PM.