94 4runner 302 swap
#1
Registered User
Thread Starter
Join Date: Jun 2011
Location: pennsylvania
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
94 4runner 302 swap
Hello all, ive been part of the site for a while now just doing alot of reading checking everything out, i think its a great site, very friendly. this will be my first post so here goes. i bought a 94 4runner v6 5spd with a blown head gasket a few years ago and fixed the gaskets drove it for a while then it started to lose power, miss, all that good stuff. found out there was no compression of cyl. 6 so i just decided to yank out the v6 and put a for 302 in it still using the stock drivetrain. started gathering parts ended up with a 302 from a mercury mountaineer and a bell housing from NW offroad and some manifolds from a 95 mustang. i wanted to use all the fuel injection so i got the computer tuned to work with the 5 spd and got some tuning done. just tonight i dropped the motor in and found quite a few issues haha. the biggest issue is clearance for rad and accessories and the exhaust. so i was hoping you guys out there that have done swaps could help me out if you have any questions just ask im open to all the help i can get thanks
http://s1325.beta.photobucket.com/us...ary/302%20yote
http://s1325.beta.photobucket.com/us...ary/302%20yote
Last edited by johnymac; 10-28-2012 at 07:55 PM. Reason: adding pictures
Thread
Thread Starter
Forum
Replies
Last Post