1uz swap into 90 pickup
#64
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
yea the afm will have to wait. i'm kinda low on funds with the beginning of the month. lol
the engine will run without it and i doubt i'll have it running anytime soon. lol
the engine will run without it and i doubt i'll have it running anytime soon. lol
#66
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
k and I'll have an afm before the truck is actually driven. i sent you an email btw. Can't wait to work on it and get the tcase hook to the tranny and motor.
#68
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
haha nice try. I'll come help you with it, but i'm sure as hell not doing it for ya. if you got beer and pizza, i'm there. lol
you already got that 3rz in your runner. what you need a 1uz for. lol
btw its brice. lol
so when you gonna come help with my swap? or at least come see "The Beater". lol
you already got that 3rz in your runner. what you need a 1uz for. lol
btw its brice. lol
so when you gonna come help with my swap? or at least come see "The Beater". lol
Last edited by highrideTOY; 07-06-2010 at 06:05 PM.
#69
Registered User
Brice, Bryce, it's all the same. Quit being so technical. I'm trying to sell my 4Runner. I just can't justify spending money on it while I'm paying for school. Once I'm in nursing school, I won't be able to afford 2 trucks anyway. I'll probably barely be able to afford 1 HAHA! I suck at wiring and I hate it, so that's what I'd need you for.
#70
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
well sell the taco and drive the runner as a DD. that is the economical thing to do. no truck payment then. DUH!
btw you gonna be one big ass nurse, gonna scare all the patients. lol
btw you gonna be one big ass nurse, gonna scare all the patients. lol
#71
Registered User
Well, the I only owe $4600 on my Tacoma, and if I sell the 4Runner for $3000 like I think I should be able to, then I'll just about have my Tacoma paid off. Plus, it'll be more reliable over the next 2 years when I have to drive all over the state for school activities. Trust me, as soon as I have my student loans paid off, I will be back on the hunt for another classic Yota!
#72
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
just make sure to talk to me when u start looking. i find yotas everywhere. got a solid axle one bout two blocks away that never moves from the driveway lol
#73
Registered User
Will do, b/c I have a hard time finding decent yota's around Jackson. It took me forever to find my 4Runner. Now I have to let it go . Oh well, it's just a vehicle.
#74
Registered User
hey you guys know theres a pm system right??? ha anyway...
from what i have read the uz will get 5-10 mpg better than the 3vz..
anything is better than an engine that gets 10mpg in the city and only put down
150hp to the flywheel...
the 3rzfe is the 2.7? i forget...
from what i have read the uz will get 5-10 mpg better than the 3vz..
anything is better than an engine that gets 10mpg in the city and only put down
150hp to the flywheel...
the 3rzfe is the 2.7? i forget...
#76
Registered User
What's the fun in that? Ha!
#77
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
wes, i got fam in gluchstadt(spelling?). when i get it done, I'm taking it over there. might have to drop by and show you a real yota. lmao
#78
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
ok i now have a very fu**ed up problem.
toyminator - did you have any problems putting the coupler on your output shaft of your transmission?
I was having issues gettin it to slide on, but i finally hammered it on. i know you're not suppose to do that, but the splines were lined up and didn't hurt anything that i know of. I finally get the coupler on and go to test fit the transfer case. I go to pull the tranny closer to me and the output shaft pulls out of the tranny. I start cussing like no other and try to put the shaft back in, but it won't go.
Can anyone please direct me on what to do? I really don't wanna tear apart a tranny and don't have the money to buy another.
Is the output shaft bolted in or should it have slid out that like?
Did i do anything wrong installing the coupler? i did have to use a sledge to get it to slide on. and yes i did make sure the splines all lined up.
sorry no pics. i was too pissed to take any. i kept cussing for about an hour and i think our neighbors think i'm nuts now. they live like 100 yards away too.
toyminator - did you have any problems putting the coupler on your output shaft of your transmission?
I was having issues gettin it to slide on, but i finally hammered it on. i know you're not suppose to do that, but the splines were lined up and didn't hurt anything that i know of. I finally get the coupler on and go to test fit the transfer case. I go to pull the tranny closer to me and the output shaft pulls out of the tranny. I start cussing like no other and try to put the shaft back in, but it won't go.
Can anyone please direct me on what to do? I really don't wanna tear apart a tranny and don't have the money to buy another.
Is the output shaft bolted in or should it have slid out that like?
Did i do anything wrong installing the coupler? i did have to use a sledge to get it to slide on. and yes i did make sure the splines all lined up.
sorry no pics. i was too pissed to take any. i kept cussing for about an hour and i think our neighbors think i'm nuts now. they live like 100 yards away too.
#79
Registered User
you could have broke a c clip that retains the shaft.. your using the lexus a340 right?
i have one sittin in my truck in the parking lot, if so let me know and i will take a look at it and see what could have happened.
i have one sittin in my truck in the parking lot, if so let me know and i will take a look at it and see what could have happened.
#80
Registered User
Thread Starter
Join Date: Aug 2009
Location: Meridian, MS/Butler, AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
yea I'm running the A340E out of the lexus. I'm pretty sure if i kept pulling that it would come out. I really dont wanna take the tranny apart. Thats something I'm really scared to do. If i have to then i guess i'll take it apart.