toyota t100 sas
#21
Registered User
Thread Starter
well i did the rear lift finally! sorry for no pictures i forgot my camera when i was doing the lift. But anyways the truck really looks nice and rides beautiful . when i went to go flex on a pile of rocks the back of the truck didnt even flex for crap (hopefully the springs just need to be broken in) but the front of the truck flexes to the moon so thats a good thing lol. ill be sure to post some pictures later on today of the truck!!!
#25
Registered User
Thread Starter
yeah i know lol it has about 8" total of lift, 2inch body lift with TG 4" front springs and 5" rear springs and then cause i mounted the shackles on the bottom of the frame im gonna say another 2". yeah i was thinking about getting bigger tires but the 35's tuck really good in the wheel well so ill probly just stick with 35s
#29
Registered User
Thread Starter
thank you
yeah i was thinking about taking the 2inch body lift off when i first did the lift but the uptravels amazing and stuffs all the way in the fender so idk lol
#30
Registered User
yeah moving the body lift would definetly help a little with the height. BTW the downtravel is more important than up tho i love the look of a stuffed tire lol. should put in some soft bumpstops. I think if it sat a little lower via removing the body lift would give it a sick mean look. Looks nice keep it up!
#35
Registered User
Thread Starter
If i do actually stick with the 8.4 rear end ill probably end up doing a diamond axle housing and then i'd be happy with that cause stock yota rear housings suck IMO. the 8.4 diff itself is beefy though and have no problems there and i beat the hell outta the poor thing
#36
Registered User
Thread Starter
somemore pics i took!
all the goodies
thick 4.88s
stock 3.08s that came in the carrier (pinion gear is huge lol)
Aussie locker installed!
pattern was ok pinion a lil on the shallow end but i probably can get away with it
got a flange from inchworm gear so i can run a yota driveshaft
thick 4.88s
stock 3.08s that came in the carrier (pinion gear is huge lol)
Aussie locker installed!
pattern was ok pinion a lil on the shallow end but i probably can get away with it
got a flange from inchworm gear so i can run a yota driveshaft
#39
Registered User
Thread Starter
After the body swap
walked this section of rocks like it was nothing my buddy in his jeep had trouble though....
right before a hill climb
after hill climb ha
cleaning my windows....
bald 36s that were givin to me for free did ok
right before a hill climb
after hill climb ha
cleaning my windows....
bald 36s that were givin to me for free did ok