E-Locker Mod For 3rd Gen 4runners
#1
Contributing Member
Thread Starter
E-Locker Mod For 3rd Gen 4runners
This mod allows use of the locker in 2wd not just 4low
supplies needed
one 14-16ga butt connector
one 14-16ga ring terminal
and some wire any size will work
remove the 4 screws pull it up then the kick panel just pull it towards you
next look for this black box
unplug it cut and strip the blue/red wire attach a butt connector and extra wire then find a convenient spot to ground it using a ring terminal
supplies needed
one 14-16ga butt connector
one 14-16ga ring terminal
and some wire any size will work
remove the 4 screws pull it up then the kick panel just pull it towards you
next look for this black box
unplug it cut and strip the blue/red wire attach a butt connector and extra wire then find a convenient spot to ground it using a ring terminal
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
tpd143
General Vehicle Related Topics (Non Year Related)
1
07-07-2015 09:06 AM