Alarm disarmed
#1
Alarm disarmed
I put my keys in my pocket at work and it tends to arm and disarm it on its own, anyways somehow i managed to completley disarm it so i cant arm it anymore, I did this once before when i first got the truck and figured out how to rearm it by hitting random buttons but this time i cant figure it out, ive tried a few common methods ive found online none of them work, anyone have any ideas? Its a ungo alarm.
#3
So i went out and mashed buttons again, couldnt get it....then im sitting there in my truck zoned out just kind of pushing buttons trying to think of something i havnt tried yet and next thing i know it armed and works now
#4
Registered User
Here is a link to some Ungo manuals. You may find the owners/install manual that you need.
http://www.the12volt.com/installbay/...rm=&page_no=16
http://www.the12volt.com/installbay/...rm=&page_no=16
#5
most aftermarket alarms can be put into / taken out of valet one of two ways
1) open the drivers door and leave it open. hit buttone in this order #1 #2 #.
2) put key in ignition and turn it to accesory. hold in the valet button ( little red push button usually in or behind kick panel or somewhere easily accesible under the dash ) alarm should go in or out of valet mode after 4-5 seconds
1) open the drivers door and leave it open. hit buttone in this order #1 #2 #.
2) put key in ignition and turn it to accesory. hold in the valet button ( little red push button usually in or behind kick panel or somewhere easily accesible under the dash ) alarm should go in or out of valet mode after 4-5 seconds
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM