Who has bucket seats...?
10-31-2008, 03:19 PM
#1
Registered User
Thread Starter
Who has bucket seats...?
SCUBA DOES!!
Lol, so i've been itching to swap out my uncomfortable stinkin bench seat, so today i hit up a wrecking yard.
Took me about 45 mins of walking and mesuring and more walking and mor measuring...but i came across this....
Its a 93 celica, obviously you can tell what happened to it.
So inside i found these...
Ill admit they are alittle rough, and a bit dirty, but they slide nice and they are compact and other then the rip on the drivers side seat they are 100% intact.
Tonight im heading out to ocotillo wells with my jeep buddy.
Gonna get up in the morning and have a nice day of adventuring.
then i gotta be back at work at 4, so these are going to have to wait till sunday
Stay tuned folks
Lol, so i've been itching to swap out my uncomfortable stinkin bench seat, so today i hit up a wrecking yard.
Took me about 45 mins of walking and mesuring and more walking and mor measuring...but i came across this....
Its a 93 celica, obviously you can tell what happened to it.
So inside i found these...
Ill admit they are alittle rough, and a bit dirty, but they slide nice and they are compact and other then the rip on the drivers side seat they are 100% intact.
Tonight im heading out to ocotillo wells with my jeep buddy.
Gonna get up in the morning and have a nice day of adventuring.
then i gotta be back at work at 4, so these are going to have to wait till sunday
Stay tuned folks
Last edited by scuba; 10-31-2008 at 03:21 PM.
10-31-2008, 03:51 PM
#2
Registered User
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
sweet man in my 87 the honda civic seats bolt right up to the front bolt and you have to drill out the rear bolts
but in mine i have 1990 mitsu (mustyoubeatme) eclipse GSX seats in my rig i had to weld them down though and drill a hole for it to bolt in the back lol cumpy though
but in mine i have 1990 mitsu (mustyoubeatme) eclipse GSX seats in my rig i had to weld them down though and drill a hole for it to bolt in the back lol cumpy though
10-31-2008, 04:02 PM
#3
Registered User
Thread Starter
It looks like im going to need slight modding of the front feet to make the more l rather then the / that they are at now, but im not expecting a huge hassle.
Once I get these in ill be builing a custom sub box/center consol/ storage box/ cup holder...yeah i know, alot of slashes.
but thats soon to come...
I need some seat covers though...
Once I get these in ill be builing a custom sub box/center consol/ storage box/ cup holder...yeah i know, alot of slashes.
but thats soon to come...
I need some seat covers though...
10-31-2008, 04:05 PM
#4
Registered User
Join Date: Jan 2006
Location: Elbert, CO
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
Nice! I just found some tan SR5 buckets in a gold 2nd gen Runner at the yard today and snagged them for my new '85 2wd pickup. Bench seats suck balls, and I can't wait to wash the crap out of these "new" seats and bolt them right in. 
10-31-2008, 04:17 PM
#5
Registered User
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
nice find guys show up some pictures when you get them in steve if you want i can show you mine lol
lol wow its one of these
show me yours and il show you mine lol
lol wow its one of these
show me yours and il show you mine lol
10-31-2008, 04:20 PM
#6
Registered User
Thread Starter
ashaman, are you going to shampoo the seats or what...im thinking i want too clean them, but dont know of a good method, my vinyl has always been wipe and go.
And yea allan post em up dood
And yea allan post em up dood
10-31-2008, 04:26 PM
#7
Registered User
Join Date: Jan 2006
Location: Elbert, CO
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
Mine are cleanish, but dusty and full of other people's farts and whatnot, so I'm planning on either steam cleaning them with my gf's steam cleaner or just taking them to the carwash and spraying the crap out of them. Need to do a bit more searching on that one before I decide.
Trending Topics
10-31-2008, 04:34 PM
#8
Registered User
Thread Starter
lmao.
I actually thought car wash also, but im thinking the foam would get moldy.
I would go the steam clean route if i had one lying around...
Can I come up to Colorado and use your gf's ??
fyi, i meant that in a totally clean way....
I actually thought car wash also, but im thinking the foam would get moldy.
I would go the steam clean route if i had one lying around...
Can I come up to Colorado and use your gf's ??
fyi, i meant that in a totally clean way....
10-31-2008, 07:46 PM
#13
Registered User
I have celica seats, I put them in maybe 2-3 months ago. More comfy than the bench, but in the regular cab they are tight for me (72") if you have a little recline.
My install took most of the day, which means some could do this pretty quickly. I used some steel plates and mounted the celica seat tracks to the plates and then the plates to the stock bold locations. And I found that the celica seat belt did not accept the truck seat belt so I had to use the existing truck connectors.
The thread patterns for the rear bolts is not common in the US (M10x1.50? I do not remember) and I could not find anything to fit, so don't lose them!
My install took most of the day, which means some could do this pretty quickly. I used some steel plates and mounted the celica seat tracks to the plates and then the plates to the stock bold locations. And I found that the celica seat belt did not accept the truck seat belt so I had to use the existing truck connectors.
The thread patterns for the rear bolts is not common in the US (M10x1.50? I do not remember) and I could not find anything to fit, so don't lose them!
10-31-2008, 07:50 PM
#14
Registered User
Thread Starter
I have celica seats, I put them in maybe 2-3 months ago. More comfy than the bench, but in the regular cab they are tight for me (72") if you have a little recline.
My install took most of the day, which means some could do this pretty quickly. I used some steel plates and mounted the celica seat tracks to the plates and then the plates to the stock bold locations. And I found that the celica seat belt did not accept the truck seat belt so I had to use the existing truck connectors.
The thread patterns for the rear bolts is not common in the US (M10x1.50? I do not remember) and I could not find anything to fit, so don't lose them!
My install took most of the day, which means some could do this pretty quickly. I used some steel plates and mounted the celica seat tracks to the plates and then the plates to the stock bold locations. And I found that the celica seat belt did not accept the truck seat belt so I had to use the existing truck connectors.
The thread patterns for the rear bolts is not common in the US (M10x1.50? I do not remember) and I could not find anything to fit, so don't lose them!
did you have to mod the front feet at all??
Edit, NVM that question
lol, i actually went to home depot and found what i needed in like 5 mins...
and they are 10x1.25...but close
But yea, please refer to question...im just trying to know what i have in store
Last edited by scuba; 10-31-2008 at 07:54 PM.
