transmission noise: 87 22re 5 speed
03-23-2010, 07:24 PM
#1
Registered User
Thread Starter
Join Date: Mar 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
transmission noise: 87 22re 5 speed
i have a 1987 4x4 pickup 22r 5 speed, all of a sudden the other day it started making a kind of rattling grinding noise in every gear except 4th. it makes no noise at idle or in 4th and it gets louder as i go faster.
i dont know much about transmissions so any ideas would be appreciated this is my brothers truck and i need to fix it because it started doing it while i drove it
i dont know much about transmissions so any ideas would be appreciated this is my brothers truck and i need to fix it because it started doing it while i drove it
03-23-2010, 07:32 PM
#2
Registered User
Join Date: Jul 2008
Location: Nashville TN. I can help you if you're close BUT NOBODY CAN HELP YOU IF YOU DON'T FILL YOUR LOCATION IN!
Posts: 1,818
Likes: 0
Received 4 Likes
on
4 Posts
based on the description, it aint sounding good...
got a neutral on your transfer case? (you do, even if you don't have the detent for it) It's between the 4H and 4L. Directly in the middle.
Put the TC in "N" and repeat testing process. Come back and tell me/ us what happens.
hey wait... 4th is a 1:1 so that makes me think input or output shaft bearing...(for some reason)
got a neutral on your transfer case? (you do, even if you don't have the detent for it) It's between the 4H and 4L. Directly in the middle.
Put the TC in "N" and repeat testing process. Come back and tell me/ us what happens.
hey wait... 4th is a 1:1 so that makes me think input or output shaft bearing...(for some reason)
Last edited by tried4x2signN; 03-23-2010 at 07:36 PM.
03-23-2010, 07:43 PM
#3
Registered User
Thread Starter
Join Date: Mar 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
i already did the neutral thing it doesnt make any noises, my buddy said something about the 4th gear being 1:1 but i never really messed with transmissions before so i dont know much about how they work, are the input and output shaft bearings hard to replace?
Last edited by brotherstruck; 03-23-2010 at 08:47 PM.
03-25-2010, 10:02 AM
#7
Registered User
Join Date: Mar 2010
Location: SE Kansas
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I don't have any ideas for your noise problem.
However, you said you need to fix it because it happened when you were driving it. Whatever happened to it, I doubt it was really your fault. More than likely, something was about ready to go anyway, you just happened to be the one driving it when it went. Unless you were jamming it into wrong gears, and stuff like that.
However, you said you need to fix it because it happened when you were driving it. Whatever happened to it, I doubt it was really your fault. More than likely, something was about ready to go anyway, you just happened to be the one driving it when it went. Unless you were jamming it into wrong gears, and stuff like that.
Trending Topics
03-25-2010, 10:20 AM
#8
Registered User
Thread Starter
Join Date: Mar 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
its my brothers truck but me and my dad use it way more than he does because it is our only 4x4 it will probably be more of a 3 way split on cost with me doin all the work because im the one that knows how to work on cars.
05-07-2013, 04:01 PM
#15
Mine does the same thing. I have been searching the internet for a fix or what the problem is. I found this... but still haven't checked it out on mine.
http://board.marlincrawler.com/index.php?topic=90346.0
http://board.marlincrawler.com/index.php?topic=90346.0
Thread
Thread Starter
Forum
Replies
Last Post
