Replaced Rear axle seal and bearings
06-27-2010, 12:17 AM
#1
Contributing Member
Thread Starter
Replaced Rear axle seal and bearings
so this morning or saturday morning i should say. i helped david (triple r) install some 1.5 bj spacers and some fj80 coils on his 4runner ,then i went ahead and did a rebuild on my rear axle .
bearings
retainers
c clips
seals
outer seals
o ring
got the kit from marlin cost me $167. shipped including taxes.
i also want to extend my diff breather , i took the breather out to see what size fitting i need , but still am unsure . i did get .90 as the thread pitch though . ill have to look this up so i can get the fitting , i already have plenty of hose .
bearings
retainers
c clips
seals
outer seals
o ring
got the kit from marlin cost me $167. shipped including taxes.
i also want to extend my diff breather , i took the breather out to see what size fitting i need , but still am unsure . i did get .90 as the thread pitch though . ill have to look this up so i can get the fitting , i already have plenty of hose .
Thread
Thread Starter
Forum
Replies
Last Post
6th Gear
84-85 Trucks & 4Runners (Build-Up Section)
19
12-10-2019 07:31 AM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
05-02-2016 09:10 PM
