Rear passenger window question
#1
Registered User
Thread Starter
Join Date: May 2011
Location: San Diego, CA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Rear passenger window question
So I finally got the time to take the trim off my rear passenger door.
A buddy of mine was rolling down the window when we heard a loud knocking sound. I figured out what the sound was today and its the motor's "glass holder" (don't know the technical term for this) bumping up against the window. So the glass isn't in it's rightful place.
My question is how do I get it back inside the motor's "holder"? I thought adhesive was all that was necessary, but if that were true then the glass would move all the way down to the bottom where the motor goes, and the glass definitely can't go that far since the window's track doesn't extend that far down the door.
Everything else seems to be working fine.
Thoughts?
A buddy of mine was rolling down the window when we heard a loud knocking sound. I figured out what the sound was today and its the motor's "glass holder" (don't know the technical term for this) bumping up against the window. So the glass isn't in it's rightful place.
My question is how do I get it back inside the motor's "holder"? I thought adhesive was all that was necessary, but if that were true then the glass would move all the way down to the bottom where the motor goes, and the glass definitely can't go that far since the window's track doesn't extend that far down the door.
Everything else seems to be working fine.
Thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
TURBOrunnerNM
86-95 Trucks & 4Runners
4
07-22-2015 11:01 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM