Les456

I have a 1992 2wd pickup and want to install a power antenna. I have visted the junkyards and have found 2 power antennas. However dont know how to hook them into my electrical.
1. Power antenna from 1992 Camry
- OEM part # 86309-33010
- 2 wires to motor are 1 is blue other is black with
yellow stripe
- connects to Power Antenna Relay OEM Part number
85914 - 33010
- total of 8 relay male pins:
top row is: 3 __ 2 1
bottom row is: 8 7 6 5 4
- connector to relay female pins:
top row is: 1 2 __ 3
bottow row is: 4 5 6 7 8
- colours for connector is:
1- blue/yellow stripe
2- Blue (goes to motor)
3- Black /Yellow Stripe (goes to motor)
4- Yellow
5- red with blue stripe
6- yellow with black stripe
7- black
8- red with white stripe
- the remaining 6 go into another connector with this
layout and incoming feeds:
top female connector row is: 1 _____ 2
bottow is: 3 4 5 6
and the colours are:
1. white with black stripe
2. red
3. pink with blue stripe
4. black
5. black with orange stripe
6. blue with red stripe


Can anybody tell me where to connect/slice into my elecrtical the 6 wires on the last connector?


Thanks for any help.

Les456

The second anteanna is from a 1991 4 Runner. The power antenna relay (OEM 86014 - 30010) has a female connector layout like this:
top row: 1 2 _____ 3 4
bottom row: 5 6 _____ 7 8

colours are:
1. Black with yellow stripe (goes to Antenna motor)
2. White with black stripe
3. Blue with Yellow stripe
4. Blue (goes to antenna motor)
5. Gray
6 Pink with Blue stripe
7. Black with red stripe
8. Black with orange stripe
Can anybody tell me where to connect or slice into my electrical the remaing 6 wires?