poor idle, what cold start sensor haha
#1
Registered User
Thread Starter
Join Date: Sep 2008
Location: belleville Ontario
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
poor idle, what cold start sensor haha
alright.. so i decided i was going to throw the tester on the cold start sensor and as soon as i hardly touched the connector with the testor probe the connector just fell right off.. finally FINALLY causing my check engine light to come on lol
so the actual cold start sensor itself is soo rotted you cant even see where the connector hooks back onto it, no even close
but the good news is the connetor will be able to be saved with a little bit of cleaning! at least the truck doesent run any different, still like crap but didnt get any worse
so the actual cold start sensor itself is soo rotted you cant even see where the connector hooks back onto it, no even close
but the good news is the connetor will be able to be saved with a little bit of cleaning! at least the truck doesent run any different, still like crap but didnt get any worse
#5
Registered User
Thread Starter
Join Date: Sep 2008
Location: belleville Ontario
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
actually.. to be honest i have been trying to look into a diesel swap.. although 3.4 swap has come into my mind once or twice.. haha cant decide at all! aybe just keep the old 3.0
#6
Registered User
Thread Starter
Join Date: Sep 2008
Location: belleville Ontario
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
so out of curiosity.. ill be picking up my cold start sensor monday and putting it in.. any words of advice for getting old one out and new one in? its a pretty tight space! haha
Thread
Thread Starter
Forum
Replies
Last Post
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM