drk421

Hey guys,
I'm putting the head back on my 88 4Runner with a 22RE (manual transmission), and I cannot seem to figure out where this wire goes.
Can one of you Toyota gurus please help me out?

It looks like 3 orange or brown wires that connect together, it appears to go right under the intake.
It is bundle with a group of other wires that go to the oil pressure sensor and aux air valve, etc.

Here is a link to a picture of the wire:

http://yfrog.com/3oconnectorj

Thanks!

abecedarian

Looks like the ground wire that goes to a bolt between the upper and lower manifold, usually towards the front of the engine.

drk421

I thought it might be a ground, but it didn't have any resistance back to ground.

I'll check the resistance again when I turn the key.

93YotaMonster

its a ground like abe said. mines bolted to the upper intake plenum

abecedarian

It's a 'component' ground so won't have continuity to ground- it grounds components like the injectors, TPS, etc.

drk421

Ah that makes sense now,
Thanks guys!

iamsuperbleeder

https://www.yotatech.com/forums/f116...-guide-194413/

abecedarian

bleeder is not pompous at all.

iamsuperbleeder

oh no, not at all





lol, hey I was just try'n to help



is it not relavent to the issue at hand?

abecedarian

You answered the OP's question... with pictures none the less.

Doesn't mean I can't razz you for it.

iamsuperbleeder

lol

<-- to you abe; let's have a beer, on my tab