Obsolete Seal retainer gasket?
#1
Obsolete Seal retainer gasket?
Hey guys Im replacing the rear main oil seal and retainer, but when I removed the retainer I dont remember any gasket, just seal packing. When I bought the new main seal it came with a big floppy gasket:
Do you guys think I should use the gasket along with the seal packing or just discard it? Seems like perhaps the seal packing alone is a more sound application..
Do you guys think I should use the gasket along with the seal packing or just discard it? Seems like perhaps the seal packing alone is a more sound application..
Last edited by coltonstewart; 07-06-2011 at 07:26 PM.
#2
Registered User
Use whatever the FACTORY repair manual calls for. If Toyota themselves put a gasket there then use a gasket but if not use what Toyota uses or equivalent. What engine is it? My crystal ball is in the shop being repaired due to the high volume of posts.
James
James
#4
Registered User
Do not use it. I'm pretty sure you use anaerobic sealer and not RTV. I could be wrong.
http://www.permatex.com/products/Aut..._Sealant_a.htm
http://www.permatex.com/products/Aut..._Sealant_a.htm
#5
Change the thread title to a statement instead of a question.
Part number: 08826-00080 SEAL PACKING BLACK 1207B (FIPG), or THREE BOND 1207B
Part number 08826-00080 was superseded by part number 00295-00103 SEAL PACKAGING BLACK 102 (FIPG)
Part number: 08826-00080 SEAL PACKING BLACK 1207B (FIPG), or THREE BOND 1207B
Part number 08826-00080 was superseded by part number 00295-00103 SEAL PACKAGING BLACK 102 (FIPG)
Last edited by MudHippy; 11-20-2011 at 07:53 AM.
#6
Lol very complete post and I thank you, but like I said I have read the fsm. This was just something i wanted to get another opinion about
This is the seal packing i already have:
This is the seal packing i already have:
Thread
Thread Starter
Forum
Replies
Last Post
Iceman4193
86-95 Trucks & 4Runners
28
08-28-2015 08:43 PM
Iceman4193
86-95 Trucks & 4Runners
3
07-15-2015 04:48 PM