just a 22re

ok i got this trany a wile back on a trade for a roller that i had. So i just looked at it again now and took the bellhousing from my 22re and see if it would bolt up and its no were close enough to bolt on to it. The 22re bellhousing is to small to fit on to the front of this trany, but it has toyota shifters, input shaft, trasfercase, and on the output thingys it has the yota rust ring that fits a toyota drive shaft to a T i dont get can someone please hell me!!!!

heres the pictures i have if you need any more let me know and ill go and take a few









please help me and thanks to anyone that can help me


i think its a V6 trany

the guy i got it from told me they pulled it out of a 1988 running 4-runner this is all i know!!

DeathCougar

iTrader: (23)

Its an 88 V6 4x4. Will not fit behind a 22R without a turbo bellhousing, and its a chain driven tcase anyways. Not very desirable.

abecedarian

that input shaft looks awful big for a trans behind a 22re 'yota'... but then again, I don't worry about input shafts... just the output one.

chadsturbotoy

i think its a Toyota R150 or R151F, manual transmissions built by aisin but, who can tell just by looking. not me, im just guessing

just a 22re

ok like i said i got it a wile back and just now got around to seeing if a bell housing would fit to it and what not just cause im trying to sell it here and had a guy offer me 200 for it and for some resion the bell houseing would no tfit i guess i kno wwhy and i so called it with being a V6 trany

so how hard is it to come by a turbo bellhousing????



and thanks guys yotatech rocks!

DeathCougar

iTrader: (23)

Turbo bellhousings are expensive, and why would you put that trans behind your engine anyways? You will have to get different driveshafts, and its chain drive to boot

just a 22re

for the guy im trying to sell it to that needs a trany i have 3 good ones out back 2 of them are in my trucks and staying there that and its a lil more infor about it now as well thanks