94Runner4x4

I have a MC rear bumper and about 2.5-3" of lift in the rear. I have to take a trailer on a 3.5 hour drive. I have put a trailer on once since I got the MC and also had the 2.5-3" lift and it was about 4-5 inches from the ground in the back and about 2 or 2 and a half feet from the ground at the bumper. How much drop should the ball mount have? I have been to autozone and wal-mart and the biggest they have is 5 1/4 ". Would this work?

abecedarian

level the trailer out and back the truck up to it and measure the difference between the bottom of the receiver on the bumper to the tongue of the trailer.

Jay351

Yep, make sure its level. Take into account how heavy your load will be...

94Runner4x4

Thanks guys. I was price shopping around for 7-8" drop ball mounts and there anyhere from $50-upper 100's..I think i might save that money and get one later on down the road and save my rig the strain of carrying that added weight and just get a u-haul. Plus the u-haul will probably get 2x the mpg my runner will!

abecedarian

I've never had a u-haul truck that got better than about 12 mpg. so...

good luck!

Jay351

They are fun to beat the crap outa though...

94Runner4x4

yea but my truck get only 12 in the city and 14 in the highway and with a trailer it would be worse and harder to get up hills...

Noltz

I bought a 8" drop Class 3 from Princess Auto up here in Ontario for $25 on sale. Keep looking.

94Runner4x4

thanks man that gives me hope!