Issues after the Trans Swap
#1
Registered User
Thread Starter
Issues after the Trans Swap
I just swapped my Auto for a Manual. Now my 4wd light won't work, but the 4wd does work.
For some reason I also lost shift on the fly. It worked with my auto, but now with the manual I have to be stopped to engage the 4x4.
My transfer case whines in 2x and 4x, more so when cold.
Factors
- I have Aisin hubs
- I have factory ADD no mods have been made
- VSV's appear to be working
Diagnosis
- I have tried the "permanent lock" for the ADD (use engine vacuum to slide the sleeve, thus controlling the 4x with the hubs)
This caused a vibration in the driveline, but the shift on the fly returned.
Anyone have any ideas here?
For some reason I also lost shift on the fly. It worked with my auto, but now with the manual I have to be stopped to engage the 4x4.
My transfer case whines in 2x and 4x, more so when cold.
Factors
- I have Aisin hubs
- I have factory ADD no mods have been made
- VSV's appear to be working
Diagnosis
- I have tried the "permanent lock" for the ADD (use engine vacuum to slide the sleeve, thus controlling the 4x with the hubs)
This caused a vibration in the driveline, but the shift on the fly returned.
Anyone have any ideas here?
#2
Registered User
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM