IFS front diff with Aussie
#1
Contributing Member
Thread Starter
IFS front diff with Aussie
First question, does this sound like a pretty good deal to you guys?
Second question, and this may be a nuB one, but this WILL fit under my 91 PU, right? I'm 99.8% sure it will, but I'm far from a diff expert, and I just want some assurance, lol
"$250. Complete differential, with locker, out of an 95 Toyota 4x4 4runner, 4.56 gears, and Aussie locker and spare oil seal. Functions perfectly!! selling cause its time for a solid axle swap and more lift. locker alone was $250. will fit most ifs 4runners."
I'm going to call the seller tomorrow and ask if the gears are new with the Aussie, or if their original gears with just the Aussie added, AND who did the locker install... those factors may determine if I ask for a lower price
In the end, my plan would be to rock an auto locker in the front, and an e-locker in the rear, and this would make for a good start untill I locate an e-locker with 4.56 gears to retrofit into the rear
Second question, and this may be a nuB one, but this WILL fit under my 91 PU, right? I'm 99.8% sure it will, but I'm far from a diff expert, and I just want some assurance, lol
"$250. Complete differential, with locker, out of an 95 Toyota 4x4 4runner, 4.56 gears, and Aussie locker and spare oil seal. Functions perfectly!! selling cause its time for a solid axle swap and more lift. locker alone was $250. will fit most ifs 4runners."
I'm going to call the seller tomorrow and ask if the gears are new with the Aussie, or if their original gears with just the Aussie added, AND who did the locker install... those factors may determine if I ask for a lower price
In the end, my plan would be to rock an auto locker in the front, and an e-locker in the rear, and this would make for a good start untill I locate an e-locker with 4.56 gears to retrofit into the rear
Last edited by iamsuperbleeder; 01-18-2010 at 02:36 PM.
#4
Contributing Member
Thread Starter
lol, yeah I just found it the other day, and was like OOOHH OOOHH OOOHH
4.56 is what I planned anyway, because those will be fine for me even after I go to 33's
on my 31's, it'll be heaven
4.56 is what I planned anyway, because those will be fine for me even after I go to 33's
on my 31's, it'll be heaven
#5
Registered User
No it won't fit. Also need to mention that 4.56 gears are really really weak and prone to breaking with any tire larger than a 28"er. That Aussie is also questionable.... I think I read somewhere that they like to break teeth off inside leading to destroyed ring and pinion.
Send me the info and I'll buy it and check it out for you. *grin*
Just kidding bro. It'll swap in just fine. If you do end up not wanting it let me know and I'd love to have it to swap into my runner.
Send me the info and I'll buy it and check it out for you. *grin*
Just kidding bro. It'll swap in just fine. If you do end up not wanting it let me know and I'd love to have it to swap into my runner.
Last edited by Junkers88; 01-18-2010 at 03:33 PM.
#7
Contributing Member
Thread Starter
Trending Topics
#8
Registered User
Um from what I have heard though, you are gonna have a he'll of a time finding a 4.56 e-locker. But really good find on the front, you will dig 4.56's, especially with the power you are putting out. You will start chirping the gears Joe Dirt style. Dust off that mullet, sunshine!
#9
Contributing Member
Thread Starter
oh and if I have trouble locating an e-locker with 4.56's, I can settle for just an auto locker; that's just less I have to wire
Last edited by iamsuperbleeder; 01-18-2010 at 03:59 PM.
#10
Registered User
plum crazy purple!
#12
Registered User
I can't tell from the picture.
Does the diff have the ADD system on it? If not, then, do you have manual hubs installed on your rig?
If you don't have manual hubs and the diff is not ADD, then you will have issues with the diff spinning all the time in 2WD.
You might have manual hubs already, I can't tell from your Avatar or from your sig.
Good find. I payed $300 plus shipping for a 5.29/Lockright front IFS diff a few years ago on Ebay.
Does the diff have the ADD system on it? If not, then, do you have manual hubs installed on your rig?
If you don't have manual hubs and the diff is not ADD, then you will have issues with the diff spinning all the time in 2WD.
You might have manual hubs already, I can't tell from your Avatar or from your sig.
Good find. I payed $300 plus shipping for a 5.29/Lockright front IFS diff a few years ago on Ebay.
#14
Contributing Member
Thread Starter
well dang...
I was too late I called the guy, and he's like "yeah I've already sold it"...
oh well... the search continues I guess, lol
someone got a killer deal though
I was too late I called the guy, and he's like "yeah I've already sold it"...
oh well... the search continues I guess, lol
someone got a killer deal though
#15
Registered User
DAMN! I had set some money aside and wanted to send you 400$ for that third if you'd ship it. S..O..B..!! I would have love to be locked front and rear!!!!
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
FS[GreatLakes]: Wanted: 4.88 front diff, rear 8'' 4.88
jaretstuff
Axles - Suspensions - Tires - Wheels
1
08-04-2015 02:08 PM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 01:44 PM
scottyg486
Offroad Tech
3
07-19-2015 05:34 PM
TokyoD23
95.5-2004 Tacomas & 96-2002 4Runners
4
07-12-2015 06:01 AM