DIY Rear suspension
#1
Registered User
Thread Starter
DIY Rear suspension
I've recently gained access to some welding equipment so my mind is running wild with possibilities.
If I were to say, design my own rear suspension, what would be the best way to go (beyond just leaves)?
I'm more interested in a all around design, or something better for going fast, than something that's for hard core rock crawling.
According to this article, angle arms are the best?
http://www.automotivearticles.com/Su...Design_2.shtml
This very in depth article seems to agree.
http://www.4wheeloffroad.com/techarticles/suspension/131_0307_four_link_suspension_part_2/index.html
Also, are Bilsteins good shocks? They're much cheaper than other brands like Fox or King...
If I were to say, design my own rear suspension, what would be the best way to go (beyond just leaves)?
I'm more interested in a all around design, or something better for going fast, than something that's for hard core rock crawling.
According to this article, angle arms are the best?
http://www.automotivearticles.com/Su...Design_2.shtml
This very in depth article seems to agree.
http://www.4wheeloffroad.com/techarticles/suspension/131_0307_four_link_suspension_part_2/index.html
Also, are Bilsteins good shocks? They're much cheaper than other brands like Fox or King...
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Yotadawgjr
95.5-2004 Tacomas & 96-2002 4Runners
10
08-23-2015 10:51 AM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM