Copper Exhaust Mani Gasket?
#1
Registered User
Thread Starter
Join Date: Feb 2009
Location: Sacramento
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Copper Exhaust Mani Gasket?
Hi all,
Just curious if anybody knows where to find a copper exahust mani/header gasket?
I have a '92 with 22RE and keep popping exhaust gaskets (mud/puddle bashing).
I searched and could not locate one for the 22RE (pear shaped ports). Just curious if anybody else had luck finding one.
TIA!
Just curious if anybody knows where to find a copper exahust mani/header gasket?
I have a '92 with 22RE and keep popping exhaust gaskets (mud/puddle bashing).
I searched and could not locate one for the 22RE (pear shaped ports). Just curious if anybody else had luck finding one.
TIA!
#3
Registered User
Join Date: Dec 2008
Location: Logan, Ut
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
I got one from my machine shop. It sucked, and I ended up going with a remflex. Best money ever spent. Even with my turbo manifold that is warped over an 1/8", it's still sealing great.
#4
Registered User
Thread Starter
Join Date: Feb 2009
Location: Sacramento
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
As for the bell housing to header brace, no. I don't have one as I have aftermarket headers on it and couldn't get the brace to work. However, that is a great point. Being as I typically have this issue after beating on the truck pretty hard, it makes sense that everything is flexing too much from not having a brace. I will have my local exhaust shop fab one up for me!
Thanks for the advice fellas!
#5
Registered User
Thread Starter
Join Date: Feb 2009
Location: Sacramento
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Found the Remflex gasket and ordered it! Thanks!
Now I have to crawl around and see wtf else is leaking...I know the header flange was leaking a bit a #4 previously, but now it sounds like...well, I dunno what it sounds like...but its pretty bad. lol
Thanks again for the help fellas!
Now I have to crawl around and see wtf else is leaking...I know the header flange was leaking a bit a #4 previously, but now it sounds like...well, I dunno what it sounds like...but its pretty bad. lol
Thanks again for the help fellas!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM