Code 12?
#1
Registered User
Thread Starter
Join Date: Jun 2010
Location: West Virginia : the state not near Richmond!
Posts: 487
Likes: 0
Received 1 Like
on
1 Post
Code 12?
I pulled the check engine light codes, and got code 14 at first, then it threw code 12 twice, it never threw 14 again... 12 is a Knock Control Sensor Signal code from what i've read... 14 is an ignition signal...
#2
Registered User
I think when I was researching this on my 87 4r, code 12 is rpm signal. Which could be the knock sensor. But all my searching led to finding out very rarely does the knock sensor itself go bad. Its most likely a conection from the sensor to the ECU. check the pig tail. the sensor itself is on the passenger's side under the oild filter I believe.
#3
Registered User
Thread Starter
Join Date: Jun 2010
Location: West Virginia : the state not near Richmond!
Posts: 487
Likes: 0
Received 1 Like
on
1 Post
I think when I was researching this on my 87 4r, code 12 is rpm signal. Which could be the knock sensor. But all my searching led to finding out very rarely does the knock sensor itself go bad. Its most likely a conection from the sensor to the ECU. check the pig tail. the sensor itself is on the passenger's side under the oild filter I believe.
Thanks for the info!!!
Thread
Thread Starter
Forum
Replies
Last Post
charlie_fong
General Vehicle Related Topics (Non Year Related)
0
09-27-2015 10:06 PM
Odin
86-95 Trucks & 4Runners
3
09-26-2015 06:56 PM