Sturmcrow

I bought my truck about a month ago. While looking into some other parts, I found that the right wheel was turning while off the ground when it was not supposed to be. Turns out that the Aisin manual hub cover is there, but the spring and sliding things inside are not. I think that I am missing three parts, and cannot find them on toyodiy, or by looking at diagrams on villagetoyotaparts.com

I think that I am missing the spring, the steel part that transfers force between the axle and hub, and the part that locks those two together. Can anybody help me out with those part numbers, or a place to get them used? I suspect that finding used parts will be hard, due to the popularity of these hubs for retrofits.

Edit: I found a link for these parts, but the Wabbit's link does not work anymore, and I cannot find his email address on the wabfab site.

racerflea

First off there is 20 some odd parts to a aisin manual hub... so ur missing a few more than 3 lol aounds like ur missing the entire gut of it. And good luck!!

Sturmcrow

Racer, I pulled apart the hub on the other side, which does work, and I'm pretty sure it's just three parts missing.

I hope I don't have to buy a whole hub just for a few missing parts.

Edit: Whoops, I guess there are 4 parts missing. I didn't see the tension spring.
http://personal.utulsa.edu/~nathan-b...14freewhee.pdf

It looks like I'll need to drop $160 at 1st toyota parts for a "hub cover sub assembly" unless I can find a used part.

waskillywabbit

iTrader: (-1)

Dealer will sell you the hub body or the dial assy but not individual parts and what they do sell is pricey enough to buy 6 pairs of used hubs.

Search.

:wabbit2: