95' v6 engine swap advice
07-03-2008, 10:18 PM
#1
Registered User
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
95' v6 engine swap advice
I have a '95 4runner that I am about to put a new engine in. This is the first time that I have pulled and installed a motor in a 4runner, and am wondering if anyone has any advice, or tips for me. I would really hate to have this go wrong for me.
Any help is appreciated.
Thank you,
Brad
Any help is appreciated.
Thank you,
Brad
07-04-2008, 01:36 PM
#4
Registered User
Join Date: Nov 2007
Location: Dillsburg, PA
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Tips: get a service manual and make sure you have the tools you need. When you pull a bolt or nut to take a part off, put it back where it goes so you don't lose the fasteners, and you know which one goes where. Make a map, if necessary of all hoses and wires.
Advice: Take your time and think about how you're gonna do something before you do it. Have someone else there to help, or at least provide moral support.
Advice: Take your time and think about how you're gonna do something before you do it. Have someone else there to help, or at least provide moral support.
07-04-2008, 01:38 PM
#5
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
Take tons of detailed pictures of the engine,hoses and vsv's before you take it apart. Keep everything in marked bags so you don't lose anything.
Get yourself a good FSM, and keep a computer handy
Get yourself a good FSM, and keep a computer handy
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
