92 4runner 4.3 swap
02-17-2014, 11:41 AM
#1
Registered User
Thread Starter
Join Date: Jul 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
92 4runner 4.3 swap
Hey guys, I have a 4runner that I bought not running, I couldn't figure out what was going on with the electrical so here I am.
I got a truck for pretty well free, it's a 94 chev with a tbi 4.3 and 5 speed tranny.
So I'm here asking some questions, both the trucks aren't going to be touched until to snow melts but I'm trying to get my head around what's involved.
I'm wondering what the minimum wires are to run the 4.3, most likely ill be taking the entire harness from the chevy. But I would like to cut out any unneeded crap.
I got a truck for pretty well free, it's a 94 chev with a tbi 4.3 and 5 speed tranny.
So I'm here asking some questions, both the trucks aren't going to be touched until to snow melts but I'm trying to get my head around what's involved.
I'm wondering what the minimum wires are to run the 4.3, most likely ill be taking the entire harness from the chevy. But I would like to cut out any unneeded crap.
02-17-2014, 12:34 PM
#2
Registered User
Join Date: Jul 2012
Location: Northern Colorado
Posts: 1,776
Likes: 0
Received 109 Likes
on
81 Posts
I would suggest looking here:
https://www.yotatech.com/forums/f163/
Probably everything you're wondering about has already been discussed in that board.
https://www.yotatech.com/forums/f163/
Probably everything you're wondering about has already been discussed in that board.
Last edited by RJR; 02-17-2014 at 12:58 PM.
02-17-2014, 12:46 PM
#3
Registered User
Thread Starter
Join Date: Jul 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Would my tranny (behind a 22re) not sure what one, hold up to the extra power from the 4.3? Or should I look into keeping the tranny from the chev and adapting that to the toy tcase? The chevy tranny I have needs a little work.
Thread
Thread Starter
Forum
Replies
Last Post
