Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

3.0 3vze wont start after new belt

Thread Tools
 
Search this Thread
 
Old 12-16-2012, 09:59 AM
  #1  
Registered User
Thread Starter
 
kenneyk911's Avatar
 
Join Date: Dec 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
3.0 3vze wont start after new belt

I had a water pump leak so I replaced my water pump and timing belt I also put a new harmonic balance on because it was worn out .. then when I put the new belt on I didnt do the timing right it was way off so I did the timing again just matched the marks up because I dont have a timing light ...still not turning over and I tried turning the distributor a little in each direction still nothing. ......help....btw I do not beleive I bent any rods or damage of the sort
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
20
08-25-2021 12:41 AM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
toyotamonster
3.4 Swaps
7
04-16-2020 06:02 PM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
07-09-2015 07:55 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM



Quick Reply: 3.0 3vze wont start after new belt



All times are GMT -8. The time now is 09:39 AM.