1995 4runner coolant overflow cap orientation / position
03-21-2015, 03:37 PM
#1
Registered User
Thread Starter
Join Date: Mar 2009
Location: Valencia California
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
1995 4runner coolant overflow cap orientation / position
Is the tab supposed to point toward the firewall or towards the bumper?
Or to put in another way, when the tank is receiving overflow coolant is it supposed to drip into the tank from the hole in the cap OR from the long tube going to the bottom of the tank ?
Or to put in another way, when the tank is receiving overflow coolant is it supposed to drip into the tank from the hole in the cap OR from the long tube going to the bottom of the tank ?
03-21-2015, 03:41 PM
#2
Registered User
The hot coolant from the radiator must enter the overflow tank thru the long hose.
When the engine cools, the coolant is then sucked back into the cooling system thru this same long hose.
When the engine cools, the coolant is then sucked back into the cooling system thru this same long hose.
Last edited by millball; 03-21-2015 at 03:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[NorAtl]: 1989 pickup beds and leer cap Rhode island
mickyd9990
Misc Stuff (Vehicle Related)
0
07-06-2015 09:01 AM
