Cosmetic, interior enhancements:
 

The Satoshi Grill Mod : Bob_98SR5 shows you how to give your 3rd gen that distinctive "retro" look with the Satoshi Grill Mod. Bob_98SR5 got the direct scoop from the man himself, Satoshi!

Installing MacNeil Weathertech Wind Deflectors : Bob_98SR5 shows you how to install Weathertech wind deflectors.

Creating A Rear Mount For Your Firestik II Antenna : Bob_98SR5 shows you how to modify a Firestik hood channel mount into a rear mount

3rd Gen Side Mounted Cargo Organizer : Jalaber shows you how he fabbed up a cargo box for the rear of his 3rd gen 4Runner to hold various items.

How To Paint Your Chrome Wheel Well Trim Black : Christian (<96 Runner> on the forums) shows you how he painted the factory chrome wheel well strips black on his 3rd gen.

Sidemarker Lamps Installation On A 2001 4Runner : Matt (LSUMatt1514) shows you how to install clear Sidemarker lamps on the front fenders of the 3rd gen 4Runners. This is another variation of the Sidemarker install as seen by the write-up directly below by Christian.

SONAR Clear Sidemarker Lamp Install, 3rd Gen 4Runner : Christian (<96 Runner>) shows you how to install clear sidemarker lamps on the front fenders of the 3rd gen 4Runners.

Installing White Face Gauges on a 1999 4Runner : Bob (Bob_98sr5) shows you how to install overlay white face gauges on a 1999 4Runner

Xterra Running Boards, 3rd Gen 4Runner : Bob (Bob_98sr5) shows you how to customize Nissan Xterra step tubes to fit your 3rd gen 4Runner

Creating Black Pearle Emblems Low Buck : Bob (Bob_98sr5) shows you how to make Black Pearl emblems---for $7! This is a great way to get that black pearl look without spending big bucks.

Custom Garmin V GPS Mount, 2nd Gen 4Runner: Lee (Firefyter-Emt) shows you how he made a custom dash mount for his Garmin V GPS. This is molded to the curvature of the dash and looks very sharp.

Indiglo Gauge Installation, '95 4Runner: Jason (L33T35T 4Runner) shows you how he put some indiglo gauges similar to Joey's into his 2nd gen 4Runner. These are getting to be quite a popular item on the forums for all years of Toyotas.

The Cup Holder Mod: Bob (Bob 98SR5) shows you how to retrofit a '99 4Runner center console cup holder into a '96 to '98 4Runner. The '96 to '98 in dash cup holders are notorious for making a mess.

Burtman Industries Clear Corners On A 3rd Gen: Bob (Bob 98SR5) shows you how he put on Jason's clear corner lights that go beside the headlamps for a nice detailed look.

Custom Grille Insert 3rd Gen: Jackson (jacksonpt) shows you how he made a new grille for a very low price.

 

Indiglo Gauge Installation, '94 4Runner: Joey (UKMyers) has done a first class write up of installing Indiglo Gauges in his 4Runner. Thank you's also go out to Luke and Cliff; Joey owes you several trips to the pub. Great looking result on this mod!

Part Painting Detail Projects: Brian Mikami (Butnut) demonstrates the right method and materials to use to paint detail some of those neglected parts on your 4Runner. And we know we all have some.

Radical RagTop for a 1995 4Runner: Chris Steger (stretch786) takes his 4Runner to the next level by installing an electric sliding fabric top into the roof of his 95'. Wild. And he did it himself! Click the pic for the full story.

Wet Okole Seat Covers: Corey (Corey) installed Wet Okole seat covers (front and back) in his 2nd gen 4Runner, and the results are impressive. They also come in a variety of colors- check it out!

Can-Back Top for a 1st gen: Mark (MRael)has done another write up featuring his installation of a Can-Back Top. This is a quality fabric top that looks awesome on the 1st generation 4Runner.

Built in SubWoofer Cabinet for a 1st gen: Mark (MRael) has done a write-up here to show you how he installed 2 10" sub woofers on the side panels of his '88 4Runner.

Fender Flare Edge Trim: Jalaber (Jalaber) has found the cure for the SR5 style of fender flares to keep them from digging into your paint and causing the clear coat to become damaged.