Wire Repair
11/14/2002

Jay has some excellent wire repair tips here to make sure your wires do not come apart on you at a very critical time.

1. Things you need.

2. Strip the wires.

3. Twist the ends.

4. Slide on HEAT SHRINK, then twist the wires together.

5. Looking good so far.

6. Apply the solder.

7. Slide the heat shrink over the joint.

8. Heat the shrink tube.

9. Job well done.

If you choose to do this task good luck, and if you have any questions  (Jay) on the Yotatech Forum.

Back to YotaTech