
Disabling the Daytime Running
Lights (3rd Gen)
5/4/2003
Now those instructions are ok, but was
vague for me.... But ok... time to look for
the Main Relay... under the dash on my
2001 Drivers side above the gas pedal
there was a box that looked like this:
(Click to Enlarge)
So there it is!!! Go back and disconnect
your Battery, then go back to this relay,
pull off the white connector... (Click
to enlarge)
Find Pin 2, which is the one cut off in
the picture... cut it and tape back the cut wire,
I cut it 1/2 up between the tape holding
the wires together and above the connector
just in case I want to reverse my changes.
Remember to Plug back in the connector
to the relay, it may sound stupid, but After
these pictures were taken, I got distracted
and forgot... then I wondered why my
headlights were not working.... Woops...
but anyways, there you go, Visual instructions...
If you choose to do this mod good luck,
and if you have any questions
(Ducky) on the Yotatech Forum.
Back to YotaTech