Trueflow air filter
#23
Contributing Member
Originally Posted by humanoid
Jason - I'm assuming these should fit my '99 3.4L V6 Taco as well, right?
http://www.burtmanindustries.com/zoo..._truflo_95u_v6
#24
Contributing Member
Thread Starter
Join Date: Nov 2003
Posts: 2,315
Likes: 0
Received 0 Likes
on
0 Posts
Jason you got a price on part # 40500 true flow intake tube????
Looked it up and it's a complete kit with filter
Looked it up and it's a complete kit with filter
Last edited by BruceTS; 10-29-2005 at 12:06 PM.
#25
Contributing Member
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BruceTS
Jason you got a price on part # 40500 true flow intake tube????
#29
Contributing Member
iTrader: (1)
Join Date: Apr 2005
Location: Colorado
Posts: 4,683
Likes: 0
Received 0 Likes
on
0 Posts
In the other thread...
Jason, Can you confirm this? If there is one, i'll buy it from you right now.
Originally Posted by Adam F
Is there an application for the 3.0?
Originally Posted by BruceTS
for the 90- 95 4runners there is, but nothing for the earliers ones....
#31
i got a filter today and *tried* to install it, but it is hard as heck to get in. i've been reading that all of yall that have them say they are a tight fit...but this is crazy. once i push the filter down, it takes a LOT of pushing to make it tilt back into place. and if i ever get it 'in place' i can't get the lid closed for the life of me. i almost think that its not shaped correctly at the rounded corners, but i dont know. were there any other tricks yall had to do to get this thing in and close the lid???
#32
Contributing Member
Join Date: Jul 2003
Location: Orlando, FL
Posts: 9,076
Likes: 0
Received 0 Likes
on
0 Posts
Ya just gotta work with it, I thought I wasn't gonna be able to get it, try pushing down on the filter lid and then manually putting the latches in place...its definitely a tight fit but thats a good thing...it'll get there, just gotta be patient.
Fink
Fink
#34
Contributing Member
I now have both air filters all back IN STOCK.
96-02 V6 Filter http://www.burtmanindustries.com/zoo..._truflo_96u_v6
03-05 V8 Filter http://www.burtmanindustries.com/zoo..._truflo_03u_v8
96-02 V6 Filter http://www.burtmanindustries.com/zoo..._truflo_96u_v6
03-05 V8 Filter http://www.burtmanindustries.com/zoo..._truflo_03u_v8
#35
Registered User
i just bought one of these from jason. as always, easy to work with jason and always prompt on the communications.
bruce, i tried mounting this by flipping the filter end over end (but still keeping wire mesh side towards the intake tube), but its still a TIGHT fit. like 4x4fink, i have to manually lift the clips up to close the lid. i mean, tight is good, but this is ridiculous! i'll probably give it a shave in a few places to see if it works out.
bob
Originally Posted by BruceTS
You really don't force the filter into place, it has to fit down in the slots just right, then it's easy, but the tight fit is a good thing......
bob
#36
Contributing Member
Thread Starter
Join Date: Nov 2003
Posts: 2,315
Likes: 0
Received 0 Likes
on
0 Posts
I recently picked up another one, so I can clean one and set it aside, when I went to install the new one it wouldn't fit. After close inspection I noticed it wasn't moulded properly, so I took my disc grinder and shaved a few places down, finally got it to set in place, but the lid woudn't close right. I then shaved down the frame where the lid was hitting and it now closes properly. My other filter is sitting inside my garage, I need to take some pictures of it before cleaning, this thing is packed full of dirt and none made it to the other side, for those of you that saw how dirty it was in Death Valley know what I'm talking about.
#39
Registered User
Join Date: May 2006
Location: Smithers, BC
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
I mean no dissrespect Jason, but to those canadians out there, I ordered my true flow air filter from canadian tire without any shipping charges. The filter was tight fit, but it works excellent.