MaK92-4RnR

I need to redo mine. :/ but heres how it used to look

suncomb1

Here is mine.

Teuf

Mak whats wrong with that location, looks functional to me.

westjohns yota

all yalls look good, just got my bucket seat put in my 87. prob gonna do an ammo can center console and mount my cobra classic 25 to the back, pics when i get too it!

irab88

iTrader: (4)

suncomb- looks sweet!

what's that button on the shifter for?

suncomb1

Nitrous control activation.

Lawn Dart

falcon5nz

Here's mine.

I've got a Realistic TRC-453 that has been modded to run on 26/27MHz as our CB freq used to be 26MHz but we are now allowed to use 27MHz (not that it stopped anyone!)



I've also got a UNIDEN uh-012SX 5w PRS rig (our version of the American FRS except between 476.4250 and 477.4125.) We used to have 40 channels and now have 80. Used to be a channel every 25KHz (Wideband) and now have on every 12.5KHz (Narrowband) So channel 1 is 476.4250 channel 2 is 476.4500 and channel 41 is 476.4375



I've also got a wee PA system.

nieb15

Not yet mounted, but I mocked up the location tonight. How does it look?

irab88

iTrader: (4)

people have had problems with the mic connector hitting the shifter with the radio mounted like that. looks great, until you need to shift haha

nieb15

There is plenty of clearance. The radio is flush with the cd player.

irab88

iTrader: (4)

cool. just somethin' to watch for.

nieb15

Yeah if the cb was flat it would stick out way too far (1in of shifter clearance), but angled it has well over 5 (plus it will be easier to adjust and read).

Joedarr33

i hooked myn and my pa speaker up. i have thought of like 5 different places. has anybody tried to mod the glove box to get it to fit in there ?

VegasNick

CB and 2M

westjohns yota

that is a work of art ^

VegasNick

Thanks man!

westjohns yota

curious, how did you manage to mount it up there? i was debateing on doing that to my next rig whenever i find once decent enough to pick up,

VegasNick

What I did was used a 2x4 piece just as wide as the CB and screwed two of the 65 pound magnets to it. I used some epoxy around the magnets before putting up against the roof. I have pounded this thing to death and it is solid.

Brian5539

Figured I would make my 1st post somewhat useful. The Uniden pro538W is a perfect fit in my '87 runner. I may have got lucky but the knobs that hold the CB to the bracket lined up perfectly to the metal bracket that the CD player is mounted to. In order for me to get it to sit flush with the CD player I had to drill a hole through the floor heat duct to route the coax through.