My Custom Rear Bumper Build!
#1
Contributing Member
Thread Starter
Join Date: Oct 2002
Location: Tigard, Oregon
Posts: 2,097
Likes: 0
Received 0 Likes
on
0 Posts
My Custom Rear Bumper Build!
This is where I will post all of the updates as I build my custom rear bumper!
8/11/2004 - I went to the steel shop today and picked up:
2 2' lengths of 3"x3" 1/4" wall "L" stock
2.5' of 2"x3" 3/16" wall rectangular tube (already have another 3.5' of this same size)
With this I will be making the frame mounting brackets.
I will get some pics tommarow when I start making the brackets.
__________________________________________________ _______________
8/12/2004 - Got some pics, look here:
http://community.webshots.com/album/174155296fOBlnI
__________________________________________________ _______________
8/14/2004 - Made the driver side bracket and picked up the rear tube piece from the steel shop:
5.5' - 2"x4" 3/16" wall rectangle tubing.
I'll try to get some new pics tonight or tommarrow.
__________________________________________________ _______________
8/17/2004 - Did some welding today, I still need to get some new pics.
__________________________________________________ _______________
8/10/2004 - I have been working on this on and off now because of the limited ammount of time I have.
So far I have finished:
Mounting brackets
hitch reciever in rear tube piece.
Again I will try to get some new pics soon!
__________________________________________________ _______________
Thanks
8/11/2004 - I went to the steel shop today and picked up:
2 2' lengths of 3"x3" 1/4" wall "L" stock
2.5' of 2"x3" 3/16" wall rectangular tube (already have another 3.5' of this same size)
With this I will be making the frame mounting brackets.
I will get some pics tommarow when I start making the brackets.
__________________________________________________ _______________
8/12/2004 - Got some pics, look here:
http://community.webshots.com/album/174155296fOBlnI
__________________________________________________ _______________
8/14/2004 - Made the driver side bracket and picked up the rear tube piece from the steel shop:
5.5' - 2"x4" 3/16" wall rectangle tubing.
I'll try to get some new pics tonight or tommarrow.
__________________________________________________ _______________
8/17/2004 - Did some welding today, I still need to get some new pics.
__________________________________________________ _______________
8/10/2004 - I have been working on this on and off now because of the limited ammount of time I have.
So far I have finished:
Mounting brackets
hitch reciever in rear tube piece.
Again I will try to get some new pics soon!
__________________________________________________ _______________
Thanks
Last edited by 914runner; 09-10-2004 at 03:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM