gave my truck a trim

934rnr · 04-03-2005, 12:06 PM

Metal was getting long and rusty so I decided to do some trimming today.

My buddy RJ came over and helped out on it.
We kind of rigged my 1000watt inverter up with some jumper cables off his blazer and went to cuttting with my sawzall.

I removed the front valence and trimmed the front fenders to fit my 36's.
I will be adding a Class III receiver to the front right between the frame rails and trimming the front bumper some so I can fit a mulitmount winch.

I will trim the back of the fender as necessary when I get the 36's.

I also trimmed a portion of the bed to reveal a crap load of rust on the bed. Well I can't afford a new bed yet I will likely cut out a good portion of rust and repair it with some aluminium or some peices of metal either welded in or riveted in for now.

The bed will be also bobbed with about 13" removed from it. So I am not done yet with it.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

**waskillywabbit** · 04-03-2005, 01:51 PM

Looks good...but why not just take the whole bed off and just tube it? And I thought you gave that awesome roll bar away?

I remember seeing tons of those in the 80s when I was in high school, most of the same guys now have nice "rust bucket" roll bars cause they are still driving the same rig working at the Burger King!

934rnr · 04-03-2005, 01:54 PM

Well slight problem not alot of money left to do it so I figured I would use what I have for now until I can afford to do it.
Also I need front springs now the left front spring has a broken leaf.

934rnr · 04-05-2005, 06:54 PM

I trimmed some more tonight.
Man this bed is looking real bad on the drivers side. Everytime I sawzall more bondo comes flying off that side of the bed.
I get to use my buddy's grinder so tomorrow I should be able to clean some of it up and use some tin and a rivet gun to kinda patch things up.
I may use some tigerhair fiberglass to cover some stuff up since I have all the stuff to do it.

photoleif · 04-07-2005, 07:25 PM

wow... big project you have brewing. got any pix from today?

934rnr · 04-08-2005, 12:09 PM

No unfortuately just the pics with the 35's.

I haven't had time to do anything else to my truck. My wife works 4 nights a week and I have 3 kids 2 that are preschool so I have to watch them during the day so no time to work on the truck. I maybe able to get a sitter and start working on it tomorrow though.

934rnr · 04-08-2005, 04:57 PM

I had time to do a little shopping called the steel places they all wanted way too much for a sheet of steel.
So I called a metal place that fabricates ducting for ventalation systems out of galvinized steel.
They hooked me up with a piece of .026 5'x5' for $15.
It should work pretty good since I am riveting it on and not welding it.

Tacoma Dude · 04-08-2005, 05:19 PM

Do you need to keep the bed? Why not just scrap the whole thing and just flatbed it?

jimbo74 · 04-09-2005, 03:34 AM

im somewhat doign the same thing to mine... i have a thread around here on it... however i am also removing the rear rollpan which it looks like you are keeping... i am not going to flatbed mine because i use mine for work, nad need the bed space.... im having an issue with what to do about the tailgate with removal of the rollpan....

934rnr · 04-09-2005, 11:42 AM

I am removing my roll pan when I get a chance. Unfortunately haven't had a chance to do anything again today.
My Wife worked again last night and this morning was called into her other job at the Fitness club to be the Manager on duty. She just barely got home at 1 pm and has to work again tonight at 9pm so she is sleeping again.

934rnr · 04-17-2005, 05:32 PM

Well my bed is littery no more. I started bobbing it today and the side litterly fell off it.

I undid all the bolts to the bed and it is going to the scrap yard tomorrow.

**waskillywabbit** · 04-17-2005, 05:41 PM

Ooooh ahhhh...I wanna see pics!

934rnr · 04-18-2005, 06:59 AM

sorry about the blurry pics I was laughing so hard about it.
This is after we picked everything up.

This last pic you can see the other peice of the bed in the back.

My buddy John laughing and leaving after we got done picking up.

jimbo74 · 04-18-2005, 07:30 AM

so its a flatbed now or what?

westy44runner · 04-18-2005, 11:26 AM

flatbed that toyota and run some long travel shocks vertical up through it...you can pick up flatbed kits fairly cheap, and there are plenty of custom designs with directions on PBB, check it out...
here's one example:

Napoleon047 · 04-18-2005, 12:02 PM

if you dont have the cash for a full on flatbed right now, just get a big tool box to go behind the cab and strap down the spare tire to the frame. it will get you by untill you decide what kind of flatbed you really want

jimbo74 · 04-18-2005, 01:53 PM

Quote:

Originally Posted by westy44runner

flatbed that toyota and run some long travel shocks vertical up through it...you can pick up flatbed kits fairly cheap, and there are plenty of custom designs with directions on PBB, check it out...
here's one example:

that link doenst work for me

934rnr · 04-18-2005, 06:42 PM

The old bed was dropped at the metal scrap yard today.
I don't have pics of it bare but let me tell you with no weight on the back the rear springs are real stiff definately felt the bumps on the way home.

Also something else kind of funny happened on the way there.
I hit a large bump it was enough to make the front of the rusty old cat converter brake right at the front of the pipe.
It was loud as hell going there I think it was louder than a semi. I think it was quite anoying to other motorists. I kinda chuckled all the way there and back.

I have a 2 1/4 univerisal cat already on order and have a thrush cherry bomb to fix the exhaust.

As far as replacing the bed I want to put something on there sometime but first I am going to wire brush the frame back there before I begin anything.
The frame doesn't have much rust it is more dirty than anything else on the inside frame rails were coated with gear oil to because of the previous bad pinion seal so they are all caked with oil and dirt that rubs off on your hands.
So once I get the frame degreased I am going to sand and paint it .

BTW I love my 1000 Watt xantrex power inverter it is enough to power my grinder also the 6.5 amp sawzall.
That's all I was using when I started to bob the bed.

04-03-2005, 01:51 PM	#2 (permalink)
waskillywabbit Super Moderator-Sponsoring Member Staff Join Date: Jul 2003 Location: Tuscaloosa, AL Posts: 14,471	Looks good...but why not just take the whole bed off and just tube it? And I thought you gave that awesome roll bar away? I remember seeing tons of those in the 80s when I was in high school, most of the same guys now have nice "rust bucket" roll bars cause they are still driving the same rig working at the Burger King! __________________ WabFab Off-Road, LLC MySpace Twitter Facebook 7th Annual South East 4Runner Jamboree, 2010 The toughest part of a Jeep is the chick driving it. Last edited by waskillywabbit; 04-03-2005 at 01:58 PM.

04-03-2005, 01:54 PM	#3 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	Well slight problem not alot of money left to do it so I figured I would use what I have for now until I can afford to do it. Also I need front springs now the left front spring has a broken leaf. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page

04-05-2005, 06:54 PM	#4 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	I trimmed some more tonight. Man this bed is looking real bad on the drivers side. Everytime I sawzall more bondo comes flying off that side of the bed. I get to use my buddy's grinder so tomorrow I should be able to clean some of it up and use some tin and a rivet gun to kinda patch things up. I may use some tigerhair fiberglass to cover some stuff up since I have all the stuff to do it. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page

04-07-2005, 07:25 PM	#5 (permalink)
photoleif Contributing Member Join Date: Jan 2005 Location: 39.995, 105.119 Posts: 643	wow... big project you have brewing. got any pix from today? __________________ '95 Xtra cab 3VZE SR5V6 \| 33x10.50-15 BFG AT/KOs \| 4" Superlift \| OME torsion bars \| Total Chaos idler arm and uniball \| Rancho steering stabilizer \| Smittybilt front & rear tubular bumpers \| Sportsman topper \| Aisin hubs \| Dual Optimas \| Extended diff breathers \| Custom center console sometime: rear locker some sometime: retire the IFS My truck page Photography: http://www.aspen-graphics.com

04-08-2005, 12:09 PM	#6 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	No unfortuately just the pics with the 35's. I haven't had time to do anything else to my truck. My wife works 4 nights a week and I have 3 kids 2 that are preschool so I have to watch them during the day so no time to work on the truck. I maybe able to get a sitter and start working on it tomorrow though. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page

04-08-2005, 04:57 PM	#7 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	I had time to do a little shopping called the steel places they all wanted way too much for a sheet of steel. So I called a metal place that fabricates ducting for ventalation systems out of galvinized steel. They hooked me up with a piece of .026 5'x5' for $15. It should work pretty good since I am riveting it on and not welding it. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page Last edited by 934rnr; 04-08-2005 at 05:03 PM.

04-08-2005, 05:19 PM	#8 (permalink)
Tacoma Dude Contributing Member Join Date: Mar 2003 Location: Orange County, CA Posts: 8,360	Do you need to keep the bed? Why not just scrap the whole thing and just flatbed it? __________________ Peter! 2002 Tacoma 1986 4Runner

04-09-2005, 03:34 AM	#9 (permalink)
jimbo74 Banned Join Date: Jan 2004 Location: Nor*Cal Posts: 6,582	im somewhat doign the same thing to mine... i have a thread around here on it... however i am also removing the rear rollpan which it looks like you are keeping... i am not going to flatbed mine because i use mine for work, nad need the bed space.... im having an issue with what to do about the tailgate with removal of the rollpan....

04-09-2005, 11:42 AM	#10 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	I am removing my roll pan when I get a chance. Unfortunately haven't had a chance to do anything again today. My Wife worked again last night and this morning was called into her other job at the Fitness club to be the Manager on duty. She just barely got home at 1 pm and has to work again tonight at 9pm so she is sleeping again. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page

04-17-2005, 05:32 PM	#11 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	Well my bed is littery no more. I started bobbing it today and the side litterly fell off it. I undid all the bolts to the bed and it is going to the scrap yard tomorrow. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page

04-17-2005, 05:41 PM	#12 (permalink)
waskillywabbit Super Moderator-Sponsoring Member Staff Join Date: Jul 2003 Location: Tuscaloosa, AL Posts: 14,471	Ooooh ahhhh...I wanna see pics! __________________ WabFab Off-Road, LLC MySpace Twitter Facebook 7th Annual South East 4Runner Jamboree, 2010 The toughest part of a Jeep is the chick driving it.

04-18-2005, 06:59 AM	#13 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	sorry about the blurry pics I was laughing so hard about it. This is after we picked everything up. This last pic you can see the other peice of the bed in the back. My buddy John laughing and leaving after we got done picking up. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page Last edited by 934rnr; 04-18-2005 at 07:07 AM.

04-18-2005, 07:30 AM	#14 (permalink)
jimbo74 Banned Join Date: Jan 2004 Location: Nor*Cal Posts: 6,582	so its a flatbed now or what?

04-18-2005, 11:26 AM	#15 (permalink)
westy44runner Registered User Join Date: Aug 2004 Location: Scottsdale, AZ Posts: 964	Flatbed Time flatbed that toyota and run some long travel shocks vertical up through it...you can pick up flatbed kits fairly cheap, and there are plenty of custom designs with directions on PBB, check it out... here's one example: __________________ '86 Toy Flatbed with a few modifications

04-18-2005, 12:02 PM	#16 (permalink)
Napoleon047 Registered User Join Date: Aug 2003 Location: Columbia, MO Posts: 995	if you dont have the cash for a full on flatbed right now, just get a big tool box to go behind the cab and strap down the spare tire to the frame. it will get you by untill you decide what kind of flatbed you really want __________________ -Peter 86 4runner SAS - Trail Rig 94 FZJ80 - DD the dirt cheap SAS Marko Customs

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help!! Mechanic gave BAD news!!	Jen97	Newbie Tech Section	7	03-25-2007 08:20 PM
89-95 truck/Runner windshield trim	Arnold	The Classifieds GraveYard	2	01-30-2007 09:32 AM
Engine Miss, dealer gave up on it...	nineball	86-95 Trucks & 4Runners	48	11-22-2006 10:49 PM
1st gen runner & 2nd gen truck chrome trim removal questions!	Ilovemountains	95.5-2004 Tacomas & 96-2002 4Runners	5	10-02-2004 02:52 AM
Almost gave in to the Tacoma Temptation today	TDiddy	95.5-2004 Tacomas & 96-2002 4Runners	7	03-15-2004 08:45 AM

04-18-2005, 06:42 PM	#18 (permalink)
934rnr Registered User Join Date: Oct 2003 Location: S. Burlington, VT Posts: 1,239	The old bed was dropped at the metal scrap yard today. I don't have pics of it bare but let me tell you with no weight on the back the rear springs are real stiff definately felt the bumps on the way home. Also something else kind of funny happened on the way there. I hit a large bump it was enough to make the front of the rusty old cat converter brake right at the front of the pipe. It was loud as hell going there I think it was louder than a semi. I think it was quite anoying to other motorists. I kinda chuckled all the way there and back. I have a 2 1/4 univerisal cat already on order and have a thrush cherry bomb to fix the exhaust. As far as replacing the bed I want to put something on there sometime but first I am going to wire brush the frame back there before I begin anything. The frame doesn't have much rust it is more dirty than anything else on the inside frame rails were coated with gear oil to because of the previous bad pinion seal so they are all caked with oil and dirt that rubs off on your hands. So once I get the frame degreased I am going to sand and paint it . BTW I love my 1000 Watt xantrex power inverter it is enough to power my grinder also the 6.5 amp sawzall. That's all I was using when I started to bob the bed. __________________ 86 Toyota 4 runner Soild front axle, 35x12.5 BFG KM2's, winch, blah blah blah.... http://www.yotatech.com/f116/my-new-red-snappah-152938/ My cardomain page Last edited by 934rnr; 04-18-2005 at 06:49 PM.