Fillsrunner4.3 crawler (PART TWO) - pic heavy! - Page 5

ocdropzone · 08-19-2008, 08:16 PM

Quote:

Originally Posted by fillsrunner4

Not to much at the moment to really update with

Been a long few weeks with the loss of a loved one and other personal matters so havent really gotten a whole lot done sadly.

Sorry to hear about your loss, always a tough time, been there...You have my condolences...

Nice thing about a hobby like we have is that twisting some wrenches or rattle canning a fender can give you time to think/forget...

How do you like your axle tie down straps for the trailer? I picked up a set a few months ago but haven't used them yet.

fillsrunner4 · 08-20-2008, 08:22 PM

Quote:

Originally Posted by ocdropzone

Sorry to hear about your loss, always a tough time, been there...You have my condolences...

Nice thing about a hobby like we have is that twisting some wrenches or rattle canning a fender can give you time to think/forget...

How do you like your axle tie down straps for the trailer? I picked up a set a few months ago but haven't used them yet.

It can be escape that is definitely true. Turn on the Ipod, grab a beer and do some

and

makes me forget about all the negatives and BS in the world. The loved one will be missed truly but life will go on. Its a reminder to me that everyday should be lived like my last as it could be gone in an instant. No regrets, many a success and failures I have seen and will continue too. Live life to the fullest and always enjoy with a smile

even if your missing a few teeth

As for the tie downs

I love them, I cross the back two for lateral stability. I absolutely love them it makes loading and unloading cake

apalmer1 · 08-22-2008, 01:39 PM

hey sorry about your loss

life sucks sometimes but thats why we have toyotas

speeking of toyotas im going to go pick up my 85 so i can start building along with ya

fillsrunner4 · 08-23-2008, 08:14 PM

Quote:

Originally Posted by apalmer1

hey sorry about your loss

life sucks sometimes but thats why we have toyotas

speeking of toyotas im going to go pick up my 85 so i can start building along with ya

hell yeah dude! Hope the build goes well.

Ive not been working much the last few weeks (its nice to take some time off to enjoy

)

I did however get the chance to borrow my Friend Erics rig.

Had a blast and broke some stuff

including all six hub studs pass side and and made the bearings loose. Luckily not much more damage done and an easy fix but Thanks again Eric

Time to turn around

Wheelin Hotties

So much fun!

More pics later!

apalmer1 · 08-25-2008, 02:19 PM

looks like it was a lot of fun i like that little truck, its still not quite as haggard as my 85 though

psh oh well who needs body panels right?

http://www.yotatech.com/f88/austins-...-heavy-152450/

fillsrunner4 · 08-26-2008, 12:28 PM

Quote:

Originally Posted by apalmer1

looks like it was a lot of fun i like that little truck, its still not quite as haggard as my 85 though

psh oh well who needs body panels right?

http://www.yotatech.com/f88/austins-...-heavy-152450/

Yeah its just sheet

The truck is my good friend Eric's. Not everyday someone lends you the keys to go beat on their rig

It was alot of fun and thanks again Eric for the keys. I had my fun with it thats for sure

Looks like your on your way

cant wait to see more
Good luck

KellyKel · 08-27-2008, 12:55 PM

You forgot the best ones:

^^11:30^^

^^12:00^^

Where's the mudflaps??

Poor Eric...

Here's from Sunday, the only other rigs out there were the purdy broncos, so mainly just sacup, the tilt, grumpy's(x2) & the poop schute

fillsrunner4 · 08-27-2008, 01:26 PM

didnt know some of those were from that day.

When did phil smash his front windshield?

KellyKel · 08-27-2008, 01:55 PM

He smashed his windshield when the tie rod end broke in the river, you would have known but you were stuck in the river on the other end. Hahahaha good times fillis.

fillsrunner4 · 08-27-2008, 02:58 PM

that it is

904_runner · 08-27-2008, 03:19 PM

hey fillis, mind if i call you that too? lol

wheres the pics of YOUR rig? i wanna see that thing done!

fillsrunner4 · 08-27-2008, 03:56 PM

Quote:

Originally Posted by 904_runner

hey fillis, mind if i call you that too? lol

wheres the pics of YOUR rig? i wanna see that thing done!

Ide perfer you not

maybe if you had some B

bies

My truck is at a friends house right now. I just cant afford the parts yet but I hope to get it running very shortly. Its really close!

Ill get some pics as I get some more work done on it

bigarms23 · 09-04-2008, 10:04 PM

any updates

fillsrunner4 · 09-05-2008, 12:05 AM

Not really Ive purchased a new starter from summit racing

I noticed that Summit sells same with AA a more expensive starter that has an offset bolt pattern. My block has both offset and inline bolt patterns. Its something to look into when you upgrade to running the 168th flywheel.

I also purchased a nice and heavy flywheel from my local shop!

I job hunting at the moment and trying to get into school possibly too. Im definitely not done with this project its just at a tough spot right now. Ill update as soon as I can with some pics.

fillsrunner4 · 09-05-2008, 12:10 AM

Heres the more expensive starter. Some blocks only have this pattern. Cost difference is about $60

john rumbo · 09-06-2008, 10:51 PM

hey fill hhows it going truck looks like its comin along nicely had to pop in to see how it was going good luck with the final steps

08-22-2008, 01:39 PM	#103 (permalink)
apalmer1 Registered User Join Date: Nov 2006 Location: Bend, OR. Posts: 609	hey sorry about your loss life sucks sometimes but thats why we have toyotas speeking of toyotas im going to go pick up my 85 so i can start building along with ya __________________ 04 taco, 3.4 5spd. loads of goodies, loads of reinforcements, getting really hard to break. 85 pickup, 327sbc, truggy, in progress. 86 mazda b2000 street queen haha. 90 mazda mx-5 all orriginal. when in doubt, tach it out.

08-25-2008, 02:19 PM	#105 (permalink)
apalmer1 Registered User Join Date: Nov 2006 Location: Bend, OR. Posts: 609	looks like it was a lot of fun i like that little truck, its still not quite as haggard as my 85 though psh oh well who needs body panels right? http://www.yotatech.com/f88/austins-...-heavy-152450/ __________________ 04 taco, 3.4 5spd. loads of goodies, loads of reinforcements, getting really hard to break. 85 pickup, 327sbc, truggy, in progress. 86 mazda b2000 street queen haha. 90 mazda mx-5 all orriginal. when in doubt, tach it out.

08-27-2008, 12:55 PM	#107 (permalink)
KellyKel Registered User Join Date: May 2008 Location: Washington Posts: 211	You forgot the best ones: ^^11:30^^ ^^12:00^^ Where's the mudflaps?? Poor Eric... Here's from Sunday, the only other rigs out there were the purdy broncos, so mainly just sacup, the tilt, grumpy's(x2) & the poop schute __________________ '85\|22re\|Twin Stick\|Dual T's\|5.29\|4.7\|All-Pro High Steer\|6 Stud Knuckles\|Chromoly Studs\|Birfield Eliminator Kit with CTM Joints\|Rear 4 Point Suspension\|Rear Coils\|4 wheel disc brakes\|Rear Fuel Cell\|Assorted Rock Lights\|ARB/IPF Magic"J" H4 headlamps in Green\|Beadlocks on 37" Toyo Open Country's\|Tubed Bed, Converted to 4 seater\| CLICK HERE & VOTE FOR DEVIN

08-27-2008, 01:26 PM	#108 (permalink)
fillsrunner4 Registered User Join Date: Jun 2004 Location: Sammamish, wa Posts: 2,363	didnt know some of those were from that day. When did phil smash his front windshield? __________________ 94' toyota 4runner (Many a change!) purchased bone stock, NOW... SAS, 37x14" Iroks, Rear Leafs, 5.29's , Air locked front, Welded rear, 4.3L, Chevy V6 , 5spd swapped, dual T/C's MC10R10, flatbelly with custom skids, sliders, and so much more. Might as well start reading this if ya want know more Fillsrunner4 3.4crawler Build Thread Fillsrunner4.3 crawler (Part Two) build thread

08-27-2008, 01:55 PM	#109 (permalink)
KellyKel Registered User Join Date: May 2008 Location: Washington Posts: 211	He smashed his windshield when the tie rod end broke in the river, you would have known but you were stuck in the river on the other end. Hahahaha good times fillis. __________________ '85\|22re\|Twin Stick\|Dual T's\|5.29\|4.7\|All-Pro High Steer\|6 Stud Knuckles\|Chromoly Studs\|Birfield Eliminator Kit with CTM Joints\|Rear 4 Point Suspension\|Rear Coils\|4 wheel disc brakes\|Rear Fuel Cell\|Assorted Rock Lights\|ARB/IPF Magic"J" H4 headlamps in Green\|Beadlocks on 37" Toyo Open Country's\|Tubed Bed, Converted to 4 seater\| CLICK HERE & VOTE FOR DEVIN

08-27-2008, 02:58 PM	#110 (permalink)
fillsrunner4 Registered User Join Date: Jun 2004 Location: Sammamish, wa Posts: 2,363	that it is __________________ 94' toyota 4runner (Many a change!) purchased bone stock, NOW... SAS, 37x14" Iroks, Rear Leafs, 5.29's , Air locked front, Welded rear, 4.3L, Chevy V6 , 5spd swapped, dual T/C's MC10R10, flatbelly with custom skids, sliders, and so much more. Might as well start reading this if ya want know more Fillsrunner4 3.4crawler Build Thread Fillsrunner4.3 crawler (Part Two) build thread

09-04-2008, 10:04 PM	#113 (permalink)
bigarms23 Registered User Join Date: Oct 2007 Location: mountains of truckee ca Posts: 820	any updates __________________ 1988sr5v6 4runner with chevy axles 513 gears dual cases overall 300to1 ratio 36mtzs 5inch lift detroits 1988sr5v6 4runner with a 4inch allpro longtravel sas with detroit rear a ls in front and 33s 1985 sr5 4runner 8inch lift 39.5 boggers 529s detroits front and rear and triple transfer cases with a final crawl ratio of 2828to 1(sold)

09-05-2008, 12:05 AM	#114 (permalink)
fillsrunner4 Registered User Join Date: Jun 2004 Location: Sammamish, wa Posts: 2,363	Not really Ive purchased a new starter from summit racing I noticed that Summit sells same with AA a more expensive starter that has an offset bolt pattern. My block has both offset and inline bolt patterns. Its something to look into when you upgrade to running the 168th flywheel. I also purchased a nice and heavy flywheel from my local shop! I job hunting at the moment and trying to get into school possibly too. Im definitely not done with this project its just at a tough spot right now. Ill update as soon as I can with some pics. __________________ 94' toyota 4runner (Many a change!) purchased bone stock, NOW... SAS, 37x14" Iroks, Rear Leafs, 5.29's , Air locked front, Welded rear, 4.3L, Chevy V6 , 5spd swapped, dual T/C's MC10R10, flatbelly with custom skids, sliders, and so much more. Might as well start reading this if ya want know more Fillsrunner4 3.4crawler Build Thread Fillsrunner4.3 crawler (Part Two) build thread

09-05-2008, 12:10 AM	#115 (permalink)
fillsrunner4 Registered User Join Date: Jun 2004 Location: Sammamish, wa Posts: 2,363	Heres the more expensive starter. Some blocks only have this pattern. Cost difference is about $60 __________________ 94' toyota 4runner (Many a change!) purchased bone stock, NOW... SAS, 37x14" Iroks, Rear Leafs, 5.29's , Air locked front, Welded rear, 4.3L, Chevy V6 , 5spd swapped, dual T/C's MC10R10, flatbelly with custom skids, sliders, and so much more. Might as well start reading this if ya want know more Fillsrunner4 3.4crawler Build Thread Fillsrunner4.3 crawler (Part Two) build thread

09-06-2008, 10:51 PM	#116 (permalink)
john rumbo Registered User Join Date: May 2008 Location: casa grande az Posts: 150	hey fill hhows it going truck looks like its comin along nicely had to pop in to see how it was going good luck with the final steps __________________ bigblockyota 884runner chevy 454 fuelinjected fullsize chevy dana 60 axles 14bolt rear 5.38grs spools frt,rrear 4wheel disc conversion tur400 trns 203 dbler 205 tranfer aprox 8-10 inch lift 37inch tslboogers 3inch magnaflow exhaust msd ingn aluminum rad ,flex fan 56 , inch spring conversion w8000lbcomp winch and bumper and just added a full hydraulic psc steering kit