Ahh I Forgot!!

davo247d · 11-01-2009, 10:46 AM

my stupid comp messed up with the pics so see down below =)

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

Team420 · 11-01-2009, 10:48 AM

ummm.... looks like u forgot the pix...lol

davo247d · 11-01-2009, 10:50 AM

they should be there idk my comp has been acting

camo31"10.50" · 11-01-2009, 10:52 AM

wow dude...this thread sucks..

FAIL!!!..lmfao

davo247d · 11-01-2009, 10:54 AM

hey im gonna get some more pics up monday cuz i didnt take enough pics

davo247d · 11-01-2009, 10:55 AM

but i know it does lol

camo31"10.50" · 11-01-2009, 10:56 AM

lmao..ok..hurry up dude..hahahahaha

davo247d · 11-03-2009, 05:02 PM

So lets try this again

here is my design on the computer(its what will be telling the mill what to do)

Here is the code on the Haas mill

Oh ya and here is the mill itself this is just one off the internet cuz i never took one of the one ive been working with but it is identical

Lining it up with the vice to make sure it is perfect so it cuts in the right spot

Here it is getting milled, pocketing the yoter logo and 22re and engraving toyota

And here it is just out of the mill

i got the back cut out so it can be attacked to the insert tube deal

Threw some primer on her because normal paint wont stick to aluminum very well (I didnt take pics of the restof the painting because i got into it and spaced to so ya

)

But then i had to sand the paint off the top so its gets all shiny (this is a really bad pic its actuly the back side you see)

It looks kinda cool only sanded half way but I wanted it to look perfect

Fully sanded

So i needed the steel back peice to get machined so it would be a tiny tiny TINY bit smaller than the male end of the insert

The reason for the interfearence fit was so we could press it on so it doesnt go any where

And our sweet press doing what it does

And then it just needed a clear coat to shine it up a little bit and of course the name of the thread implies that i for got to take more pictures and etc etc but there you are

Elton · 11-03-2009, 05:04 PM

looks cool better get lock for it

davo247d · 11-03-2009, 05:07 PM

Thanks lol i probibly will but theres not to many yota lovers here in helena

bigt · 11-03-2009, 05:08 PM

can we get a pic on your rig??

good stuff!

davo247d · 11-03-2009, 05:16 PM

Quote:

Originally Posted by bigt

can we get a pic on your rig??

good stuff!

lol ill get pics up by the weekend because the truck is at my friends house because we were putting a head gasket in it lol,
and i guess if any one wants one i could make/sell ya one

toyospearo · 11-03-2009, 10:28 PM

WOW MAN!!
NICE WORK!
I want one

davo247d · 11-04-2009, 03:50 PM

and my next project is probibly gonna be a pre runner bar maby with a skid plate but i am now quiet sure

Kiroshu · 11-04-2009, 04:05 PM

dude i want one!!!!!!!!

davo247d · 11-04-2009, 04:06 PM

well if you guys really want one ill make ya one lol

davo247d · 11-07-2009, 09:07 AM

here it is on my rig lol

BigBluePile · 11-07-2009, 09:21 AM

DUDE!!! How much!!!! That is awesome!!!!

davo247d · 11-08-2009, 07:06 AM

well i have been selling em for 50 but ill sell them for 30 on this site lol but i can design custom ones too just post a pic

11-01-2009, 10:50 AM	#3 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	they should be there idk my comp has been acting __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-01-2009, 10:52 AM	#4 (permalink)
camo31"10.50" Registered User Join Date: Aug 2007 Location: Vian, OK Posts: 2,099	wow dude...this thread sucks.. FAIL!!!..lmfao __________________ FOR SALE 1986 Ext. Cab 4x4, rebuilt 22R, 5spd, 31x10.50 X-Terrains FOR SALE 1992 SR5 FO RUNNA V6, 5 speed, 4in. trail-master lift, 33x12.50 BFG muds, 4.56 gears!!! and an IMMACULATE interior..yes..you should be jealous "Its still a toyota man.. Dont deprive it of its capabilities.." "If you can read english, Thank a teacher...If you can speak it, Thank a soldier!!" Kelli Ruark-2009

11-01-2009, 10:54 AM	#5 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	hey im gonna get some more pics up monday cuz i didnt take enough pics __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-01-2009, 10:55 AM	#6 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	but i know it does lol __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-01-2009, 10:56 AM	#7 (permalink)
camo31"10.50" Registered User Join Date: Aug 2007 Location: Vian, OK Posts: 2,099	lmao..ok..hurry up dude..hahahahaha __________________ FOR SALE 1986 Ext. Cab 4x4, rebuilt 22R, 5spd, 31x10.50 X-Terrains FOR SALE 1992 SR5 FO RUNNA V6, 5 speed, 4in. trail-master lift, 33x12.50 BFG muds, 4.56 gears!!! and an IMMACULATE interior..yes..you should be jealous "Its still a toyota man.. Dont deprive it of its capabilities.." "If you can read english, Thank a teacher...If you can speak it, Thank a soldier!!" Kelli Ruark-2009

11-03-2009, 05:02 PM	#8 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	So lets try this again here is my design on the computer(its what will be telling the mill what to do) Here is the code on the Haas mill Oh ya and here is the mill itself this is just one off the internet cuz i never took one of the one ive been working with but it is identical Lining it up with the vice to make sure it is perfect so it cuts in the right spot Here it is getting milled, pocketing the yoter logo and 22re and engraving toyota And here it is just out of the mill i got the back cut out so it can be attacked to the insert tube deal Threw some primer on her because normal paint wont stick to aluminum very well (I didnt take pics of the restof the painting because i got into it and spaced to so ya) But then i had to sand the paint off the top so its gets all shiny (this is a really bad pic its actuly the back side you see) It looks kinda cool only sanded half way but I wanted it to look perfect Fully sanded So i needed the steel back peice to get machined so it would be a tiny tiny TINY bit smaller than the male end of the insert The reason for the interfearence fit was so we could press it on so it doesnt go any where And our sweet press doing what it does And then it just needed a clear coat to shine it up a little bit and of course the name of the thread implies that i for got to take more pictures and etc etc but there you are __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-03-2009, 05:04 PM	#9 (permalink)
Elton Contributing Member Join Date: Jul 2005 Location: Siletz,Oregon Posts: 10,670	looks cool better get lock for it __________________ My Truck 98 4runner SR5 3.4L 5spd 4x4 E-Locker Mods Mom 07 Tundra d-cab limited 5.7L 4x4 auto sister 92 pickup SR5 X-cab 3.0L 5spd 4x4 Papa 89 Pickup SR5 X-cab 4x4 3.0L 5spd/98 4runner SR5 4x4 auto 3.4L R.I.P 91 4runner SR5 4x4 3.0L 5spd Totaled 5/13/06 My Wreck

11-03-2009, 05:07 PM	#10 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	Thanks lol i probibly will but theres not to many yota lovers here in helena __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-03-2009, 05:08 PM	#11 (permalink)
bigt Registered User Join Date: Nov 2007 Location: chippawa niagara falls ontario Posts: 3,201	can we get a pic on your rig?? good stuff! __________________ 1991 HILUX SURF SSR-X turbo diesel right hand drive toyota imported in 2005 from japan, 130,000 km 31 bfg a/t auto current build 1987 LWB suzuki samurai. turning 2 into one.. yota axles welded front to back, yota springs , ifs steering box,, this bad boy will not only eat jeeps but toyotas aswell \m/

11-03-2009, 10:28 PM	#13 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,589	WOW MAN!! NICE WORK! I want one __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/

11-04-2009, 03:50 PM	#14 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	and my next project is probibly gonna be a pre runner bar maby with a skid plate but i am now quiet sure __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-04-2009, 04:05 PM	#15 (permalink)
Kiroshu Registered User Join Date: Oct 2007 Location: wade, NC Posts: 1,342	dude i want one!!!!!!!! __________________ My current: 1986 Toyota 4runner SR5 EFI 4cyl 2.4L 22RE 5-Speed 242,000 Miles 95% Stock __________________ (Still working on restoring her) My old: 1988 Toyota 4runner SR5 EFI V6 3.0L 3VZ-E 5-Speed 302,000 Miles All stock (sold)______________ (Was my fastest truck i miss her...) My old: 1989 Toyota 4runner Non-SR5 EFI 4cyl 2.4L 22RE Automatic 231,000 Miles (sold)______________ (was my quietest and slowest yota.)

11-04-2009, 04:06 PM	#16 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	well if you guys really want one ill make ya one lol __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-07-2009, 09:07 AM	#17 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	here it is on my rig lol __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

11-08-2009, 07:06 AM	#19 (permalink)
davo247d Registered User Join Date: Jun 2009 Location: Helena Montana Posts: 250	well i have been selling em for 50 but ill sell them for 30 on this site lol but i can design custom ones too just post a pic __________________ 1988 p/u 4x4 22re all stock accept the new dents i put in the side of it, o/e clutch from toyota, timing chain kit, water pump, and the newest a blown head gaskit and it needs new rings wait for a rebuild thread! New Truck 88 sr5 22re with rancho's and a nice little towing package but the engine was knocking so i pulled the engine out and im gonna rebuild it

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search