Wyorunner's 02 Sport aka WYORUNNER
03-24-2009, 01:36 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Anne Arundel County, MD
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Wyorunner's 02 Sport aka WYORUNNER
Before Anything, about a week after i bought it.
Windows Tinted to 5%
3" OME
PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!!
Windows Tinted to 5%
3" OME
PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!!
Last edited by wyorunner; 03-24-2009 at 04:49 PM.
03-24-2009, 03:58 PM
#2
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Anne Arundel County, MD
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Led tail lights
Here are my tails i just did on 3-17
Before
left side hit a phone booth...
right still good
third tail with the LED third above it
comparison shot with old third
with new third
all three done in the day
at night
i also put in LED blinkers and reverse lights
reverse in the day
at night
blinkers in the day
at night
Before
left side hit a phone booth...
right still good
third tail with the LED third above it
comparison shot with old third
with new third
all three done in the day
at night
i also put in LED blinkers and reverse lights
reverse in the day
at night
blinkers in the day
at night
03-24-2009, 04:45 PM
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Anne Arundel County, MD
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
1" 4Crawler Body Lift
I put my body lift on, on 3-18,
PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!! PM or Email me with questions or comments.
Before
after
A quick write up with a few pictures,
Take all door Trim pieces of, 5 screws in the rear hatch 2 on each back door and 4 on the front two doors.
lift the carpet and there will be black caps that can be popped out which are hiding the bolt heads, one by the drivers left foot, one right behind left side of the drivers seat, one right inside the back door, then one underneath the cargo area quarter panel plastic.. and its the same on the passenger side. then there are two behind the front bumper.
in the rear
do one side at a time, unbolt all five bolts from oneside, put a block under the pinch weld of that side jack it up and put in the spacers, put the new bolts in, and then on to the other side.
EDIT: I have fender well covers to cover the gap in the rear and will put up pictures when i do it.
PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!! PM or Email me with questions or comments.
PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!! PM or Email me with questions or comments.
Before
after
A quick write up with a few pictures,
Take all door Trim pieces of, 5 screws in the rear hatch 2 on each back door and 4 on the front two doors.
lift the carpet and there will be black caps that can be popped out which are hiding the bolt heads, one by the drivers left foot, one right behind left side of the drivers seat, one right inside the back door, then one underneath the cargo area quarter panel plastic.. and its the same on the passenger side. then there are two behind the front bumper.
in the rear
do one side at a time, unbolt all five bolts from oneside, put a block under the pinch weld of that side jack it up and put in the spacers, put the new bolts in, and then on to the other side.
EDIT: I have fender well covers to cover the gap in the rear and will put up pictures when i do it.
PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!! PM or Email me with questions or comments.
Last edited by wyorunner; 03-26-2009 at 08:21 AM.
03-26-2009, 08:13 AM
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Anne Arundel County, MD
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Heres the write up on my Guage cluster LED INSTALL
And here is the write up on my Temperatur control LED conversion
And here is the write up on my Temperatur control LED conversion
Last edited by wyorunner; 03-29-2009 at 03:57 PM.
03-30-2009, 01:23 PM
#7
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Anne Arundel County, MD
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Newest addition, I bypassed the stock transmission cooler and put in ths LPD 4474 cooler. Didnt take pictures of the hose re routing but its tucked up by the radiator so it cant get snagged on anything. But this is where i mounted it, itll be here for a while, im contemplating putting it on the skid plate when i get a chance to make one. But who knows. Heres the only pic i have of it.
Trending Topics
05-10-2009, 05:23 PM
#9
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Anne Arundel County, MD
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Well, while out buying a trailer this weekend my baby broke 100k.
And here is my new trailer, is going to be sandblasted, painted black, new tires, shocks brakes and maintenance overhaul before i pick it up. Its an M416 1/4 ton army trailer from back in the day.
And here is my new trailer, is going to be sandblasted, painted black, new tires, shocks brakes and maintenance overhaul before i pick it up. Its an M416 1/4 ton army trailer from back in the day.
Thread
Thread Starter
Forum
Replies
Last Post
Big Little Bear
Pre 84 Trucks (Build-Up Section)
230
11-13-2023 11:42 AM
LotOMiles
95.5-2004 Tacomas & 96-2002 4Runners
8
09-14-2015 11:45 PM
