Hostile's Profile

hostile · 04-17-2009, 10:48 AM

Figured i'd finally start one of these build threads since i'm finally doing some more mods to my 4runner.

I bought my 95 4Runner completely stock on 4/1/08 after i wrecked my old car. It's a 6cyl 3.slow. I won't lie, it's a 2WD but i wheel it anyways. Should have went 4WD but at the time i needed a vehicle to get me to work. Despite what most people think, my 2WD is pretty capable. I've only gotten stuck twice, both was because i nearly rolled and needed help getting out.

This is my 4runner 100% stock august 29th 2008 coming down from a 5 day camping trip in the Sequoia National Park:

Stock right after i bought it:

After some research and some idiotic mechanics telling me the wrong thing for a while i installed 4Crawler's BJ Spacers and coil spacers. At the same time I bought a set of 4 31" Cooper Discoverer STT tires off craigslist for 270 and 4 possibly knock-off centerline rims for 150:

^also removed side steps

Last week I installed some Procomp ES3000 shocks all the way around that I bought from Jackit.com.

I figured the 3000's because they're not gas charged and would provide a smoother ride on the road as well as off. I bought them 4" longer than stock with plans of another 2" lift. They came super fast (only 2 days) so I decided to order some 4" ProComp lift coils from them also but now i'm going on my 6th day of waiting to install.

I plan to get rid of the coil spacers with the 4" lift coils and keep the BJ spacers and adjust the torsion bars to match the extra 2" in the back.

Update: Forgot to mention the other night someone stole the cat off my 4runner while I was asleep. We have pictures of the people from our security cameras and are trying to find them but so far no luck. Honestly, it really was an inconvenience to have to replace it, but now that i look at it the new one is a MUCH lower profile and gives probably about another 3" of clearance in that spot so it may have been a blessing in disguise?

Currently: Finished the extra 2" lift. Need to get an alignment and in a week after i replenish some funds a panhard drop bracket.

I'll keep this updated.

PS: Are rear lockers on a 2WD 4runner a waste of time? .. random thought

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

hostile · 04-21-2009, 11:04 PM

4/19: Installed 4" procomp lift coils and realized i really need to get that panhard drop bracket asap
4/20: took the day off for obvious reasons
4/21: matched the extra 2" of lift with torsion bar adjustments. The front end still sits a quarter inch lower than the back but i'm afraid to adjust them any higher.
4/22: going to get an alignment done

hostile · 04-26-2009, 09:26 PM

Here's a few new pictures since the 4" procomp lift coils and t-bar adjustments. Taken on my cell phone so excuse the quality. First pic was outside my work, second was in my drive way after a wash.

hostile · 05-14-2009, 02:17 PM

Just finished blinker mod using this tutorial: http://www.lieblweb.com/tacoma/Mecha...n/blinker.html

Getting ready for front and back bumpers this weekend.

hostile · 06-20-2009, 10:14 PM

Just moved to San Francisco so I haven't had time to post. I did finish my bumpers before we moved. Here's a pic of the front, i'll post up more later on or visit my cardomain.
http://www.cardomain.com/ride/3335169

image of the rear w/ a little flex:

image of the side:

04-21-2009, 11:04 PM	#2 (permalink)
hostile Banned Join Date: May 2008 Location: San Francisco, CA Posts: 397	4/19: Installed 4" procomp lift coils and realized i really need to get that panhard drop bracket asap 4/20: took the day off for obvious reasons 4/21: matched the extra 2" of lift with torsion bar adjustments. The front end still sits a quarter inch lower than the back but i'm afraid to adjust them any higher. 4/22: going to get an alignment done Last edited by hostile; 04-21-2009 at 11:07 PM.

04-26-2009, 09:26 PM	#3 (permalink)
hostile Banned Join Date: May 2008 Location: San Francisco, CA Posts: 397	Here's a few new pictures since the 4" procomp lift coils and t-bar adjustments. Taken on my cell phone so excuse the quality. First pic was outside my work, second was in my drive way after a wash. Attached Thumbnails Last edited by hostile; 04-26-2009 at 09:28 PM.

06-20-2009, 10:14 PM	#5 (permalink)
hostile Banned Join Date: May 2008 Location: San Francisco, CA Posts: 397	Just moved to San Francisco so I haven't had time to post. I did finish my bumpers before we moved. Here's a pic of the front, i'll post up more later on or visit my cardomain. http://www.cardomain.com/ride/3335169 image of the rear w/ a little flex: image of the side: Last edited by hostile; 06-25-2009 at 01:22 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
my profile	88Cleve4runner	4Runners-1st gen	9	08-20-2009 06:12 PM
Scottiac's profile	Scottiac	4Runners-3rd gen	0	03-30-2007 08:49 AM
Kumadrift's profile	KUMAdrift	4Runners-3rd gen	1	01-28-2007 07:07 PM
Boriswebs? Profile	boriswebs	Trucks, 3rd gen-'89 to '95	0	12-20-2006 09:49 PM

05-14-2009, 02:17 PM	#4 (permalink)
hostile Banned Join Date: May 2008 Location: San Francisco, CA Posts: 397	Just finished blinker mod using this tutorial: http://www.lieblweb.com/tacoma/Mecha...n/blinker.html Getting ready for front and back bumpers this weekend.