Collin's 4Pwner
03-23-2009, 09:04 PM
#1
Registered User
Thread Starter
Join Date: Dec 2008
Location: Fountain Hills, AZ
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Collin's 4Pwner
I finally have a reason to do one of these.
1992 4Runner 4x4 SR5
3.0L V6 31" Dominators
I got her on Dec 23 of 08 and on 25 swamped her out in a mud hole and had to rebuild the intake.
The day I got her;
and then this happened...
so we pulled her home and pulled the intake and put a new filter in...
she sharted on the street too
and now she lives.
I pulled the side steps and got some sweet stickers thrown on there and then went wheeling again;
The front CV half shafts were pretty torn up and finally one of them went out so we decided to replace both sides and put new brake pads and rotors on her.
Here's the GOOD SIDE, the other one is way worse
One side done
This side is still waiting for the other driveshaft;
Some of the random parts. I ordered 1.5" BJ Spacers and a set of 2" Coil Spacers from 4Crawler but I'm waiting for my extended brake lines and new Shocks.
Looking forward to;
Those BJ and Coil spacers installed
A set of BFG 33" Mudders
Some Cragar Black 8s
New ProComp shocks
And a new set of front and rear skids.
Then we HXC
1992 4Runner 4x4 SR5
3.0L V6 31" Dominators
I got her on Dec 23 of 08 and on 25 swamped her out in a mud hole and had to rebuild the intake.
The day I got her;
and then this happened...
so we pulled her home and pulled the intake and put a new filter in...
she sharted on the street too
and now she lives.
I pulled the side steps and got some sweet stickers thrown on there and then went wheeling again;
The front CV half shafts were pretty torn up and finally one of them went out so we decided to replace both sides and put new brake pads and rotors on her.
Here's the GOOD SIDE, the other one is way worse
One side done
This side is still waiting for the other driveshaft;
Some of the random parts. I ordered 1.5" BJ Spacers and a set of 2" Coil Spacers from 4Crawler but I'm waiting for my extended brake lines and new Shocks.
Looking forward to;
Those BJ and Coil spacers installed
A set of BFG 33" Mudders
Some Cragar Black 8s
New ProComp shocks
And a new set of front and rear skids.
Then we HXC
Last edited by CRafferty; 04-21-2009 at 08:16 PM.
04-21-2009, 08:33 PM
#2
Registered User
Thread Starter
Join Date: Dec 2008
Location: Fountain Hills, AZ
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
BJ Spacers and Coil Spacers from 4Crawler!!!!
WOOT!!!
Did the Coil Spacers first.
The baby sitting next to the old man's willy's:
Now to the front!
My dad insisted that he did the cutting himself, stealing all teh fun.
Now she needs new shoes and skids. Then she'll be up and running in full.
WOOT!!!
Did the Coil Spacers first.
The baby sitting next to the old man's willy's:
Now to the front!
My dad insisted that he did the cutting himself, stealing all teh fun.
Now she needs new shoes and skids. Then she'll be up and running in full.
Last edited by CRafferty; 04-21-2009 at 08:36 PM.
06-08-2009, 10:28 PM
#3
Registered User
Thread Starter
Join Date: Dec 2008
Location: Fountain Hills, AZ
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
I've never ran back and forth from Home Depot to Checker to Ace Hardware in my life lol. Well worth it though.
Parts list:
1) 2-2"x3" Rubber Couplers
2) 1-45* 3" Black PVC Pipe Elbow
3) 1-24" Length of Straight 3" Black PVC Pipe
4) 4-PVC Hose Bibs
5) 2-Spectre 3/8" Air Filters
6) 1-12" Length of Black Ribbed Flex Pipe
7) 1-3/3" Rubber Coupler
'Twere a major PITA to get everything fitted, but I got the entire intake cleaned out and the whole right side of the engine bay way cleaned up. The throttle body response and little power boost is a good thing too. I'll have pics up in the morning. Probably a short story on my adventures to get all the parts too.
Parts list:
1) 2-2"x3" Rubber Couplers
2) 1-45* 3" Black PVC Pipe Elbow
3) 1-24" Length of Straight 3" Black PVC Pipe
4) 4-PVC Hose Bibs
5) 2-Spectre 3/8" Air Filters
6) 1-12" Length of Black Ribbed Flex Pipe
7) 1-3/3" Rubber Coupler
'Twere a major PITA to get everything fitted, but I got the entire intake cleaned out and the whole right side of the engine bay way cleaned up. The throttle body response and little power boost is a good thing too. I'll have pics up in the morning. Probably a short story on my adventures to get all the parts too.
