BLKNBLU's SAC - Page 2

Elvota · 10-27-2008, 11:09 PM

I should be able to give you a hand if I have the day off. I know my schedule about a week in advance, so I'll let you know.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

dlbrunner · 10-28-2008, 02:11 PM

I would like to watch the process. I'll be around.

I can hold stuff

BLKNBLU · 11-17-2008, 12:33 PM

So it's getting down to crunch time. Who is coming over? I need a semi-serious commitment mostly for food/soda/beer purchasing

BLKNBLU · 11-17-2008, 12:35 PM

Also, probably going to start a serious thread about the build at some point so please keep all the joking around in this one. Thanks.

Djlarroc · 11-17-2008, 12:38 PM

Nice Mike! I wish I could be there. Take lot's of pics. Can't wait to ride in it after the swap.

lofreqjeff · 11-17-2008, 07:18 PM

I can be there!

Although I may not be a good technical resource, I can take a thousand pics, not to mention I make a good go'fer!

Keep me posted!

sschaefer3 · 11-18-2008, 04:46 PM

I will make some time to stop by.

westy44runner · 11-19-2008, 07:51 AM

I am out of town, backpacking the Grand Canyon. Get lots of photos of the swap!

BLKNBLU · 11-20-2008, 08:33 PM

Thanks guys. I'll probably get started about 9am so show up anytime you like. I'll PM my addy.

sschaefer3 · 11-20-2008, 08:36 PM

E-Mail me I have PM's turned off.

RiNkY · 11-21-2008, 06:17 AM

PM me your addy. If I have time I'd like to stop by and meet some of you folks and get an idea of what you guys are doing. Planning my own SAS in the next 12 months or so.

Don't worry about counting me for Food etc. tho as I'll only be there an hour or 2 tops, just be nice to meet some of ya'll.

SOAZtim · 11-22-2008, 07:34 AM

Quote:

Originally Posted by BLKNBLU

Also, probably going to start a serious thread about the build at some point so please keep all the joking around in this one. Thanks.

Well, I for one am disappointed. I didn't see one single joke about making a thread about your sac. Am I the only 5 year old around here.

wormhole · 11-22-2008, 06:23 PM

Good luck on the swap mike.

BLKNBLU · 11-23-2008, 08:00 PM

A pretty productive weekend. I got the IFS stuff dismantled on Saturday and 1 leg of the suspension stuff cut off. Got the rest of the below frame junk cut off today. A little more frame clean up and I should be able to start hanging stuff. Alas, it's back to work in the AM though.

The trouble spots were getting the Downey IFS truss off. It's was 6 kinds of jacked up. Removing the bolts on the driveshaft to pinion flange, I think they have never been touched. And finally, cutting the rear legs off the frame. They have about 8 layers of metal to get through. What a PITA!

And I'm sore all over. Not sure if I beat on the truck or vice versa. Whatever Steve charges to do this stuff, pay it. It's worth every cent.

Elvota · 11-23-2008, 08:05 PM

Quote:

Originally Posted by BLKNBLU

... I'm sore all over. Not sure if I beat on the truck or vice versa. Whatever Steve charges to do this stuff, pay it. It's worth every cent.

Trying to get pregant is the fun part.
Giving birth is the hard part.

(I think in someway this relates to your current project, at least it did before I typed it out.

)

Just think how much more you'll appreciate the SAS after what you are going through now.

904_runner · 11-23-2008, 08:13 PM

Wheres all the pics????

Also what kit are you using?

BLKNBLU · 11-23-2008, 08:23 PM

Quote:

Originally Posted by Elvota

Trying to get pregant is the fun part.
Giving birth is the hard part.

(I think in someway this relates to your current project, at least it did before I typed it out.

)

Hmm. Yeah, I had to think about that one for a second.

Quote:

Originally Posted by 904_runner

Wheres all the pics????

Also what kit are you using?

No pics. Nobody came over so it was just me, myself, and I, and I wasn't up for the stopping, washing up, snapping pic, back to work business.

Using Trailgear stuff.

904_runner · 11-23-2008, 08:41 PM

Let me know how you like it! I think im planning on going the TG route!

Oh, one of these days ill be able to sas mine.

And isn't the rule, You have to stop and document your build???

I think everybody would love to see some pics too!

(BTW, what happened to everybody who said they would be there? lol.

)

111db · 11-23-2008, 08:52 PM

Dude! I just spotted the update to this thread right now! That sucks - I wanted to get in on that process. Sorry man.

You still need help drinking all the brews?

BLKNBLU · 11-23-2008, 09:00 PM

Quote:

Originally Posted by 111db

Dude!

You still need help drinking all the brews?

Nah! I'm good.

BLKNBLU · 11-23-2008, 09:04 PM

BTW 904 runner check out Elvota's threads on his build. I think he has exactly what you are looking at with yours.

904_runner · 11-23-2008, 09:13 PM

Yup i wouldn't mind making mine look like his!

Im just debating between brands for the sas kit, and i have been for awhile, and i probably will debate until i actually order a kit.

with your 4runner, what amount of lift are you looking for?

sschaefer3 · 11-24-2008, 07:13 PM

Quote:

Originally Posted by 904_runner

Yup i wouldn't mind making mine look like his!

Im just debating between brands for the sas kit, and i have been for awhile, and i probably will debate until i actually order a kit.

with your 4runner, what amount of lift are you looking for?

He has Trail Gear 4" fronts and 5" rear but we are going to do a custom install. His truck will be like all the other AZ trucks with the Daystar Competition stops reversed to the flip plate and we are going to do something completely new to the rear.

In the end it will be the same as all the rest I did.

BLKNBLU · 11-24-2008, 08:07 PM

Quote:

Originally Posted by sschaefer3

He has Trail Gear 4" fronts and 5" rear but we are going to do a custom install. His truck will be like all the other AZ trucks with the Daystar Competition stops reversed to the flip plate and we are going to do something completely new to the rear.

In the end it will be the same as all the rest I did.

Yep. What he said. Size wise it should be about like this.

And just for 904 runner, one of Elvota all twisted up.

904_runner · 11-24-2008, 08:09 PM

I might as well drive out to arizona tomorrow

then i can see these rigs in person! lol

Well last time i was there, i saw elvolta's from the other side of the freeway, but that doesn't count!

10-28-2008, 02:11 PM	#27 (permalink)
dlbrunner Contributing Member Join Date: Nov 2004 Location: phoenix Posts: 1,141	I would like to watch the process. I'll be around. I can hold stuff __________________ Duncan -------------------------------------------------- Current: 95 4X4 SR5 V6, Yakima tracks/rack installed. Aisin hubs. Sonoran Steel IFS Truss. Cobra CB(finally!) Desired: 66 FJ45 shorty EX's: 89 4X4 V6 Downey'd 72 FJ40 W 350/SM465 powertrax, "Billy"

11-17-2008, 12:33 PM	#28 (permalink)
BLKNBLU Registered User Join Date: Mar 2004 Location: Gilbert, Arizona Posts: 1,666	So it's getting down to crunch time. Who is coming over? I need a semi-serious commitment mostly for food/soda/beer purchasing __________________ 86 4Runner, custom Sonoran Steel rear bumper, 4Crawler 1" body lift, rock sliders from Richard Stubbs, rear Lockright, SAS w/ARB My build thread. http://www.yotatech.com/f66/blknblu-s-sac-155872/

11-17-2008, 12:35 PM	#29 (permalink)
BLKNBLU Registered User Join Date: Mar 2004 Location: Gilbert, Arizona Posts: 1,666	Also, probably going to start a serious thread about the build at some point so please keep all the joking around in this one. Thanks. __________________ 86 4Runner, custom Sonoran Steel rear bumper, 4Crawler 1" body lift, rock sliders from Richard Stubbs, rear Lockright, SAS w/ARB My build thread. http://www.yotatech.com/f66/blknblu-s-sac-155872/

11-17-2008, 12:38 PM	#30 (permalink)
Djlarroc Contributing Member Join Date: Jun 2007 Location: Denver, CO Posts: 1,322	Nice Mike! I wish I could be there. Take lot's of pics. Can't wait to ride in it after the swap. __________________ '89 4Runner: 22RE 5spd, 4:10s w/202K, 16x8 w/265-75 MT, Diamond headlights, Aisin hubs, Tortis' custom roll on paint job, Home made bikini, 1" Body Lift, 1.25" greasable lift shackles, TG Sliders, 1.5" BJ spacers, Rust is gone! - SOLD! '00 4Runner: Locked F/R - sold!

11-17-2008, 07:18 PM	#31 (permalink)
lofreqjeff Registered User Join Date: Jul 2005 Location: Chandler AZ Posts: 637	I can be there! Although I may not be a good technical resource, I can take a thousand pics, not to mention I make a good go'fer! Keep me posted! __________________ Jeff -'89 4Runner - Manual Trans - 3.Slo - 31x10.50-15 Goodyear MTR's - Downey Bikini Top - 4X Innovations Tube doors - Sonoran Steel IFS Truss - Bud Built Crossmemeber/Skids - 1.5" sdori BJ spacers, 2" Downey rear leafs, 1" wheel spacers on all 4, OME Shocks - Detroit Soft locker - ZUK mod - Custom sliders and rear bumper w/Spare carrier - Asian Manual Hubs - COMING SOON: - Custom dash with passenger side grab handle & clinometer - plus plenty more!

11-18-2008, 04:46 PM	#32 (permalink)
sschaefer3 Contributing Member Join Date: May 2002 Location: Tempe, Arizona Posts: 5,494	I will make some time to stop by. __________________ Steve Schaefer *WWW.SonoranSteel.Com* Suspension Lift Kits * Rock Sliders * Straight Axle Conversions * 4Runner/FJC Rubicon Express Lower Links * Accessories * Daystar Products Dealer * TJM Bull Bar Dealer * Deaver Leaf Spring Dealer * Tokico & Bilstein Shock Dealer * ViAir Dealer * Total Chaos Dealer * TOYTEC Dealer * and like everyone else a Trail Gear Dealer

11-19-2008, 07:51 AM	#33 (permalink)
westy44runner Registered User Join Date: Aug 2004 Location: Scottsdale, AZ Posts: 967	I am out of town, backpacking the Grand Canyon. Get lots of photos of the swap! __________________ '86 Toy Flatbed with a few modifications

11-20-2008, 08:33 PM	#34 (permalink)
BLKNBLU Registered User Join Date: Mar 2004 Location: Gilbert, Arizona Posts: 1,666	Thanks guys. I'll probably get started about 9am so show up anytime you like. I'll PM my addy. __________________ 86 4Runner, custom Sonoran Steel rear bumper, 4Crawler 1" body lift, rock sliders from Richard Stubbs, rear Lockright, SAS w/ARB My build thread. http://www.yotatech.com/f66/blknblu-s-sac-155872/

11-20-2008, 08:36 PM	#35 (permalink)
sschaefer3 Contributing Member Join Date: May 2002 Location: Tempe, Arizona Posts: 5,494	E-Mail me I have PM's turned off. __________________ Steve Schaefer *WWW.SonoranSteel.Com* Suspension Lift Kits * Rock Sliders * Straight Axle Conversions * 4Runner/FJC Rubicon Express Lower Links * Accessories * Daystar Products Dealer * TJM Bull Bar Dealer * Deaver Leaf Spring Dealer * Tokico & Bilstein Shock Dealer * ViAir Dealer * Total Chaos Dealer * TOYTEC Dealer * and like everyone else a Trail Gear Dealer

11-21-2008, 06:17 AM	#36 (permalink)
RiNkY Registered User Join Date: Apr 2007 Location: Mesa, AZ Posts: 261	PM me your addy. If I have time I'd like to stop by and meet some of you folks and get an idea of what you guys are doing. Planning my own SAS in the next 12 months or so. Don't worry about counting me for Food etc. tho as I'll only be there an hour or 2 tops, just be nice to meet some of ya'll. __________________ -------------------- RiNkY 87 4Runner (22re) 4x4 5spd. 1.5" BJ Spacers, 1" Diff Drop, WARN Manual Hubs, 2" Downey Leaf Springs, Skyjacker Shocks, 6" Wabfab shackles, Rear Shock Mounts & Bump Stops. Downey: Bikini Top & Sliders. Marlin Crawler Rear bumper. Budbuilt Crossmember. Addicted Offroad Front Bumper. 31x10.5's. 05 Xterra Off Road 4x4 6spd.

11-22-2008, 06:23 PM	#38 (permalink)
wormhole Registered User Join Date: Aug 2006 Location: Bountiful, Utah Posts: 1,526	Good luck on the swap mike. __________________ 2000 Toyota 4runner auto, 4x4, elocker, budbuilt skid, Sonoran Steel 7.2, 265/75/16 Yokohoma Geolanders AT-S Just call me "T"

11-23-2008, 08:00 PM	#39 (permalink)
BLKNBLU Registered User Join Date: Mar 2004 Location: Gilbert, Arizona Posts: 1,666	So far, so good A pretty productive weekend. I got the IFS stuff dismantled on Saturday and 1 leg of the suspension stuff cut off. Got the rest of the below frame junk cut off today. A little more frame clean up and I should be able to start hanging stuff. Alas, it's back to work in the AM though. The trouble spots were getting the Downey IFS truss off. It's was 6 kinds of jacked up. Removing the bolts on the driveshaft to pinion flange, I think they have never been touched. And finally, cutting the rear legs off the frame. They have about 8 layers of metal to get through. What a PITA! And I'm sore all over. Not sure if I beat on the truck or vice versa. Whatever Steve charges to do this stuff, pay it. It's worth every cent. __________________ 86 4Runner, custom Sonoran Steel rear bumper, 4Crawler 1" body lift, rock sliders from Richard Stubbs, rear Lockright, SAS w/ARB My build thread. http://www.yotatech.com/f66/blknblu-s-sac-155872/

11-23-2008, 08:13 PM	#41 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,781	Wheres all the pics???? Also what kit are you using? __________________ Mike 1990 4runner: 3.4 swapped, 5-speed, sas'd, Rear leaf swap, Locked, 5.29's, 39.5" iroks on Beadlocks, Armor'd Longfields, Duals coming soon: My build thread http://www.yotatech.com/f152/904_run...thread-158746/ http://www.treadlightly.org/ http://www.pirate4x4.com/tech/billav...ery/index.html

11-23-2008, 08:41 PM	#43 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,781	Let me know how you like it! I think im planning on going the TG route! Oh, one of these days ill be able to sas mine. And isn't the rule, You have to stop and document your build??? I think everybody would love to see some pics too! (BTW, what happened to everybody who said they would be there? lol. ) __________________ Mike 1990 4runner: 3.4 swapped, 5-speed, sas'd, Rear leaf swap, Locked, 5.29's, 39.5" iroks on Beadlocks, Armor'd Longfields, Duals coming soon: My build thread http://www.yotatech.com/f152/904_run...thread-158746/ http://www.treadlightly.org/ http://www.pirate4x4.com/tech/billav...ery/index.html

11-23-2008, 08:52 PM	#44 (permalink)
111db Registered User Join Date: Jun 2004 Location: Mesa AZ Posts: 1,215	Dude! I just spotted the update to this thread right now! That sucks - I wanted to get in on that process. Sorry man. You still need help drinking all the brews? __________________ Jon *97 4Runner 3.4 4.88's * ARB Lockers F/R * ARB compressor * Sonoran Steel numba 1 * 285 BFG AT/KO * TJM 17 * BudBuilt Skids * Stubbs Sliders & BBQ sauce * Irbis out back * Various Electronic Gadgets**

11-23-2008, 09:04 PM	#46 (permalink)
BLKNBLU Registered User Join Date: Mar 2004 Location: Gilbert, Arizona Posts: 1,666	BTW 904 runner check out Elvota's threads on his build. I think he has exactly what you are looking at with yours. __________________ 86 4Runner, custom Sonoran Steel rear bumper, 4Crawler 1" body lift, rock sliders from Richard Stubbs, rear Lockright, SAS w/ARB My build thread. http://www.yotatech.com/f66/blknblu-s-sac-155872/

11-23-2008, 09:13 PM	#47 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,781	Yup i wouldn't mind making mine look like his! Im just debating between brands for the sas kit, and i have been for awhile, and i probably will debate until i actually order a kit. with your 4runner, what amount of lift are you looking for? __________________ Mike 1990 4runner: 3.4 swapped, 5-speed, sas'd, Rear leaf swap, Locked, 5.29's, 39.5" iroks on Beadlocks, Armor'd Longfields, Duals coming soon: My build thread http://www.yotatech.com/f152/904_run...thread-158746/ http://www.treadlightly.org/ http://www.pirate4x4.com/tech/billav...ery/index.html

11-24-2008, 08:09 PM	#50 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,781	I might as well drive out to arizona tomorrow then i can see these rigs in person! lol Well last time i was there, i saw elvolta's from the other side of the freeway, but that doesn't count! __________________ Mike 1990 4runner: 3.4 swapped, 5-speed, sas'd, Rear leaf swap, Locked, 5.29's, 39.5" iroks on Beadlocks, Armor'd Longfields, Duals coming soon: My build thread http://www.yotatech.com/f152/904_run...thread-158746/ http://www.treadlightly.org/ http://www.pirate4x4.com/tech/billav...ery/index.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nice Hoodies on SAC	iGGz	Off Topic Talk	6	11-16-2006 10:26 AM
Mossys Sac is done	MossyRocks	The Fab Shop	62	10-24-2006 05:03 PM
Nice 3rd gen coilover SAC	justinh	95.5-2004 Tacomas & 96-2002 4Runners	12	09-06-2006 05:55 PM
05 double cab SAC	justinh	Off Topic Talk	49	01-19-2006 06:21 AM