Ballistic Crap Missile (Not a Toyota)

Yota Tony · 03-22-2008, 08:28 PM

Thought I'd post my build up on here, I'm not super far along but I'm slowly making progress.
Rig is a 93 Jeep Grand Cherokee Limited, v8 D30/D35, 249 awd t-case.

First real part I ordered was my Crawl box kit from Mad Rooster:

The crawl box is basically a doubler. Using a D300 for the rear case so I can twin sticks. Low-Low will be 7.4:1.

Got a spare 231 transfer case and started to take it apart:

Yota Tony · 03-22-2008, 08:31 PM

Painted up the crawl box (still need to cut it and have a block off plate welded in then it's finished):

Also picked up my High Pinion D60 Front Axle:

Yota Tony · 03-22-2008, 08:36 PM

Specs will be:
Custom 3 link front
Custom Triangulated 4 link rear
FOA Coil Overs
HP D60 Front
14 Bolt Rear (with a big shave job)
5.38 axle gears, Detroit Lockers, rear disc conversion
231/D300 Crawl Box
Flat Belly Skid
All the protection goodies (bumpers, sliders, cage, etc.)

Opinions, comments, flames.....all welcome.

Dare44 · 03-22-2008, 08:44 PM

i think u need a frame

Yota Tony · 03-22-2008, 09:36 PM

Frames are over rated.

camo31"10.50" · 03-22-2008, 10:28 PM

sounds like its going to be SICK!!!!....but...1 question..why post it in a toyota forum???LoL

Yota Tony · 03-23-2008, 01:02 PM

Why not?
I use to own an 82 Pick Up.

Who care what rig one drives as long as they build it and wheel it.

4banginRunner · 03-23-2008, 01:33 PM

nice, ZJ's are very underrated
i daily drive a 95 GC for now, until i get my 87 4Runner streetable, very impressed how capable it is offroad, 214000 miles on it, runs like a champ

keep us posted!

Island_Yota · 03-23-2008, 02:23 PM

Meh, Why did you get rid of the first gen?

Yota Tony · 03-23-2008, 04:25 PM

Quote:

Originally Posted by Island_Yota

Meh, Why did you get rid of the first gen?

No time and my parents wanted the rusty POS out of their drive way.

GenXr · 03-23-2008, 05:24 PM

Quote:

Originally Posted by Yota Tony

Why not?
I use to own an 82 Pick Up.

Who care what rig one drives as long as they build it and wheel it.

Go for it dude! Looks like it's going to be an awesome build up.

Thanks for posting up here. Build ups are cool to watch....not matter what vehicle.

Yota Tony · 03-24-2008, 09:09 AM

Thanks.
Updates will be slow because I'm taking my time building this thing.

colsoncj · 03-25-2008, 09:00 PM

post up the shave job on the 14B... how much you thinkin.. shaved ring or non shaved ring?

Yota Tony · 04-01-2008, 03:51 PM

Quote:

Originally Posted by colsoncj

post up the shave job on the 14B... how much you thinkin.. shaved ring or non shaved ring?

Not sure, going to talk to the shop that might do my gears (I might decide to take that project on myself too). I'd like to give it a really nice shave and be done with it.

Got some suspension brackets showing up this week.

Here's some better pics of the HP D60 because I have nothing else of importance to show off right now. Please ignore the funny/ugly looking truss the previous owner attempted to make, it will be replaced by something much beefier.

Hubs are already drilled to 8.5x6".

Got a line on my 14bolt, hopefully I'll pick that up in the next week or two.

Yota Tony · 04-03-2008, 09:54 AM

Well I pulled the cover off the 'D60' the other night, a post on Pirate drove me to do so. Imagine my surprise when this was staring me in the face.

That looks like a 44 carrier inside a 60 housing, WTF! Through the wisdom of Pirate I found out that this axle was indeed a HP D50 and not a D60 like I originally thought, D'OH! Listen learned, always pull the cover or run the BOM first.

Now I bought that axle from a friend and in his defense, he had no clue it was a D50 either. He had been told it was a D60 buy the guy he got it from and the guy he got it from told him it was a 60, confused yet? Am I. Anyhow we're working to correct this small hiccup.

Now thankfully, there is no such thing as D50 Cs and Knuckles, it'll all 60 stuff. The housing is 60 stuff but the carrier is this bastard step child D50 crap. Fear not, all is not lost.
I looked at my stock, made phone call to Jim @ Rock Spyder yesterday and worse case scenario, I'll be removing the knuckles and Cs from the D50 and then buying a Spidertrax housing and having Jim burn it back together to use stock 60 shafts. Then all I need is a True High 9 center section and I'll have a 609 front axle

Also got a Ford 9" housing from an 80s Bronco sitting around that will become my rear axle.

03-22-2008, 08:28 PM	#1 (permalink)
Yota Tony Registered User Join Date: Jan 2007 Location: Mississauga, Ontario, Canada Posts: 1,066	Ballistic Crap Missile (Not a Toyota) Thought I'd post my build up on here, I'm not super far along but I'm slowly making progress. Rig is a 93 Jeep Grand Cherokee Limited, v8 D30/D35, 249 awd t-case. First real part I ordered was my Crawl box kit from Mad Rooster: The crawl box is basically a doubler. Using a D300 for the rear case so I can twin sticks. Low-Low will be 7.4:1. Got a spare 231 transfer case and started to take it apart: __________________ Anthony 93 ZJ - Stockish (HP D60 Front, 14 Bolt Rear, 231/D300 Crawl Box...awaiting 40" tires) Ballistic Crap Missile ILikeMud.net Mallcrawlin.com SOTRA

03-22-2008, 08:31 PM	#2 (permalink)
Yota Tony Registered User Join Date: Jan 2007 Location: Mississauga, Ontario, Canada Posts: 1,066	Painted up the crawl box (still need to cut it and have a block off plate welded in then it's finished): Also picked up my High Pinion D60 Front Axle: __________________ Anthony 93 ZJ - Stockish (HP D60 Front, 14 Bolt Rear, 231/D300 Crawl Box...awaiting 40" tires) Ballistic Crap Missile ILikeMud.net Mallcrawlin.com SOTRA

03-22-2008, 08:36 PM	#3 (permalink)
Yota Tony Registered User Join Date: Jan 2007 Location: Mississauga, Ontario, Canada Posts: 1,066	Specs will be: Custom 3 link front Custom Triangulated 4 link rear FOA Coil Overs HP D60 Front 14 Bolt Rear (with a big shave job) 5.38 axle gears, Detroit Lockers, rear disc conversion 231/D300 Crawl Box Flat Belly Skid All the protection goodies (bumpers, sliders, cage, etc.) Opinions, comments, flames.....all welcome. __________________ Anthony 93 ZJ - Stockish (HP D60 Front, 14 Bolt Rear, 231/D300 Crawl Box...awaiting 40" tires) Ballistic Crap Missile ILikeMud.net Mallcrawlin.com SOTRA

03-22-2008, 08:44 PM	#4 (permalink)
Dare44 Registered User Join Date: Sep 2007 Location: grass valley, ca Posts: 902	i think u need a frame __________________ 1997 Toyota 4x4 SR5 4runner 3.4 auto Toytec 3 inch coil spring Lift Trail Gear Rock Sliders Maxxis Bighorn M/T's Amp Custom Rims Cobra CB, 5ft Firestik KC Daylighters http://www.cardomain.com/ride/3008195 Near Future List Bumpers Lockers 1st Gen Roll Bar Winning the Lottery?

03-22-2008, 09:36 PM	#5 (permalink)
Yota Tony Registered User Join Date: Jan 2007 Location: Mississauga, Ontario, Canada Posts: 1,066	Frames are over rated. __________________ Anthony 93 ZJ - Stockish (HP D60 Front, 14 Bolt Rear, 231/D300 Crawl Box...awaiting 40" tires) Ballistic Crap Missile ILikeMud.net Mallcrawlin.com SOTRA

03-22-2008, 10:28 PM	#6 (permalink)
camo31"10.50" Registered User Join Date: Aug 2007 Location: Vian, OK Posts: 659	sounds like its going to be SICK!!!!....but...1 question..why post it in a toyota forum???LoL __________________ 1986 Toyota 4x4 extra cab pickup stock 22R 5spd with 35,000 miles on a complete rebuild pushin 200PSI in every cylinder...31x10.50 swamper TSL's (muddin shoes) Kelly Safari SUV (street shoes) 1980 Toyota 4x4 20R/L43 combo not in the best of shape...but gets me wherever the '86 wont.. :)...still not sure if i want to part with it just yet..(FOR SALE!)

03-23-2008, 01:02 PM	#7 (permalink)
Yota Tony Registered User Join Date: Jan 2007 Location: Mississauga, Ontario, Canada Posts: 1,066	Why not? I use to own an 82 Pick Up. Who care what rig one drives as long as they build it and wheel it. __________________ Anthony 93 ZJ - Stockish (HP D60 Front, 14 Bolt Rear, 231/D300 Crawl Box...awaiting 40" tires) Ballistic Crap Missile ILikeMud.net Mallcrawlin.com SOTRA

03-23-2008, 01:33 PM	#8 (permalink)
4banginRunner Registered User Join Date: Dec 2005 Location: Mount Carmel, PA Posts: 904	nice, ZJ's are very underrated i daily drive a 95 GC for now, until i get my 87 4Runner streetable, very impressed how capable it is offroad, 214000 miles on it, runs like a champ keep us posted! __________________ 87 Toyota 4Runner SR5 22RE--5spd swap (W56-A) w/Hurst t-handle shift knob--V6 4.56 swap--1.5" BJ spacers, AAL's & ZUK mod--'85 brown/tan interior--sway bar removed--2.5" Flowmaster 40 series--2.25" exhaust--Battery/Intake swap--late style steering box swap--V6 calipers--1" MC--34" Nitto's--Consistent 22MPG Daily Driver 79 Toyota Longbed 4x4 Awaiting time, money & some parts previous 82 Longbed 4x4 Pickup 90 Toyota 4Runner<3 RIP 95 Jeep Grand Cherokee

03-23-2008, 02:23 PM	#9 (permalink)
Island_Yota Registered User Join Date: May 2007 Location: Vancouver Island, B.C. Posts: 586	Meh, Why did you get rid of the first gen?

03-24-2008, 09:09 AM	#12 (permalink)
Yota Tony Registered User Join Date: Jan 2007 Location: Mississauga, Ontario, Canada Posts: 1,066	Thanks. Updates will be slow because I'm taking my time building this thing. __________________ Anthony 93 ZJ - Stockish (HP D60 Front, 14 Bolt Rear, 231/D300 Crawl Box...awaiting 40" tires) Ballistic Crap Missile ILikeMud.net Mallcrawlin.com SOTRA

03-25-2008, 09:00 PM	#13 (permalink)
colsoncj Contributing Member Join Date: Jun 2004 Location: Monett, MO (Springfield) Posts: 2,488	post up the shave job on the 14B... how much you thinkin.. shaved ring or non shaved ring? __________________ Cory Eastern OK, Western/Northern AR, Southeastern KS, or Southern MO area: OZARKS 4ROC Click Here 04 Dodge 2500 Cummins - DD/Tow Rig 02 Z06 Corvette - Weekender 94 FZJ80 - Wheelin Rig. Currently on 33"s, plan to go 35"s. 72 Buick GS - i.e. the project that will never get done.

04-03-2008, 09:54 AM	#15 (permalink)
Yota Tony Registered User Join Date: Jan 2007 Location: Mississauga, Ontario, Canada Posts: 1,066	Well I pulled the cover off the 'D60' the other night, a post on Pirate drove me to do so. Imagine my surprise when this was staring me in the face. That looks like a 44 carrier inside a 60 housing, WTF! Through the wisdom of Pirate I found out that this axle was indeed a HP D50 and not a D60 like I originally thought, D'OH! Listen learned, always pull the cover or run the BOM first. Now I bought that axle from a friend and in his defense, he had no clue it was a D50 either. He had been told it was a D60 buy the guy he got it from and the guy he got it from told him it was a 60, confused yet? Am I. Anyhow we're working to correct this small hiccup. Now thankfully, there is no such thing as D50 Cs and Knuckles, it'll all 60 stuff. The housing is 60 stuff but the carrier is this bastard step child D50 crap. Fear not, all is not lost. I looked at my stock, made phone call to Jim @ Rock Spyder yesterday and worse case scenario, I'll be removing the knuckles and Cs from the D50 and then buying a Spidertrax housing and having Jim burn it back together to use stock 60 shafts. Then all I need is a True High 9 center section and I'll have a 609 front axle Also got a Ford 9" housing from an 80s Bronco sitting around that will become my rear axle. __________________ Anthony 93 ZJ - Stockish (HP D60 Front, 14 Bolt Rear, 231/D300 Crawl Box...awaiting 40" tires) Ballistic Crap Missile ILikeMud.net Mallcrawlin.com SOTRA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The new French Anti-Tank missile	Mason Dixon	Off Topic Talk	7	02-15-2007 05:01 PM
holy crap you can make a lot of money at Toyota	gohawks	Off Topic Talk	19	01-25-2006 07:14 PM
Anyone have a Toyota towing converter crap out?	Plamar	95.5-2004 Tacomas & 96-2002 4Runners	1	09-08-2003 09:08 AM
Temperature needle going ballistic!	KING	95.5-2004 Tacomas & 96-2002 4Runners	7	05-28-2003 06:34 PM