Internal Roll Cages for Toyotas from 4x Innovations!

traxman25 · 01-17-2008, 10:54 AM

Updated 5/5/09

We've spent hundreds of hours reinventing the wheel on these cages! They fit like a glove and you will not get a better fit!

They have been trail tested and are ready to save your ass, and your head too!
The quick and dirty:

All tubes bent and notched to fit and weld
Includes inside and bottom side mounting plates
Includes all hardware
Includes grab handles
Includes tube gussets
Padding available

Kits are sold ready to weld. All tubes are notched to fit perfectly and weld in place. Steel weld in grab handles, laser cut mounting plates for both side of the body and hardware is included. We can also custom build extra pieces for you at very reasonable rates.

Assistance with shipping costs is also available. Please call, PM, or email us for great shipping rates.

Pick ups, both regular cab and extended cabs come with the very important x bracing for the rear most cross hoop (B or C depending on reg, or ex cab). In the ex cab you can even keep the stock shelf after notching out the rear two corners by about 2 inches, your cage will fit THAT TIGHT!

All of cages also include 1" tube handles, and laser cut mounting plates! Check out the full line over on our web site, and call, PM, or email for your low quote today.

95.5-04 Tacomas:
Regular Cab 9IRC-R:
HREW: $449.00
DOM: $529.00

Extended Cab 10IRC-EX:
HREW: $479.00
DOM: $615.00

84-88 Pickups:
Regular Cab 2IRC-R:
HREW: $425.00
DOM: $499.00

Extended Cab 2IRC-EX:
HREW: $455.00
DOM: $599.00

90-95 4 Runners:
Full Length 6RIC: Ends at the tailgate
HREW: $565.00
DOM: $723.00

84-89 4 Runners:
Passenger Length 4RIC: Ends just behind the rear wheel well, at the stock roll bar mounting point.
HREW: $459.00
DOM: $599.00

Full Length 5RIC: Ends at the tailgate
HREW: $549.00
DOM: $705.00

Thank you to everyone who has supported us already!

Pictures in this post: 4RIC - Passenger Length 84-89 4 Runner Roll Cage

In-cab cage kit, In-cab roll cage kit, Roll bar kit, exo cage, exo skeleton, external roll cage, internal cage kit, Toyota roll cage

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

traxman25 · 02-10-2008, 08:14 AM

Pictures: 4RIC - Passenger Length 84-89 4 Runner Roll Cage

Pictures: 5RIC - Full Length 84-89 4 Runner Roll Cage

traxman25 · 03-13-2008, 08:52 AM

Pictures: 5RIC - Full Length 84-89 4 Runner Roll Cage

**waskillywabbit** · 03-13-2008, 10:32 AM

traxman25 · 03-13-2008, 04:13 PM

Thanks Brian, I'll get your cage out soon. Nice ass btw.

904_runner · 03-13-2008, 07:57 PM

Hey are you guys developing one for a 2nd gen?

Looks sick!

traxman25 · 03-14-2008, 08:45 AM

2nd gen 4 Runner yes, but I have no idea on a time frame as of right now. Not sure on the pickup, I have to find one I can use for that.

904_runner · 03-14-2008, 09:00 AM

Cool, i will be looking into one when its out.

Not that i do anything hardcore, but at least with a cage ill have a better chance of not dieing if it rolls!

traxman25 · 05-25-2008, 06:59 PM

I should have Cages for 2nd Gen runners in the next week or two.

LTrunner · 05-25-2008, 07:04 PM

not ready for a cage YET, but how do they mount to the floor?

Hayes · 05-25-2008, 07:07 PM

Those are sweet, when I am ready for my cage...you will be the first to know.

**waskillywabbit** · 05-25-2008, 07:10 PM

I am "almost" finished getting mine put in this weekend...gotta finish welding some of it out and adding some bracing to the frame, but for the most part it is done.

904_runner · 05-25-2008, 09:43 PM

Quote:

Originally Posted by traxman25

I should have Cages for 2nd Gen runners in the next week or two.

Okay it might be a few months, actually a long time away, but i would eventually like to get one!

Im sure some people would like to get some too!

fillsrunner4 · 05-25-2008, 10:47 PM

Quote:

Originally Posted by LTrunner

not ready for a cage YET, but how do they mount to the floor?

your gonna want to tie it into the frame.

Usually if its just a floor mount kit you basicaly weld the cage to plates on the floor and bolt the plates down. 4 bolts each point

I would cut holes in the floor and tie that cage into the frame for the best strength other wise the cage is pretty useless

traxman25 · 05-26-2008, 07:01 AM

Quote:

Originally Posted by fillsrunner4

your gonna want to tie it into the frame.

Usually if its just a floor mount kit you basicaly weld the cage to plates on the floor and bolt the plates down. 4 bolts each point

I would cut holes in the floor and tie that cage into the frame for the best strength other wise the cage is pretty useless

fillsrunner, Do you even know how it mounts to the floor? Have you ever seen our cage after a hard roll? I have, and it was defiantly NOT useless.

Our cages tie into the floor at 6 points with wide mounting plates and 4 bolts each. We also give the extra plates to use place on the underside of the floor. This spreads the force out over a large area, and holds the floor captive on BOTH sides. Other cages, like what Fillsrunner thinks he's talking about, use much smaller mounting plates and do not provide the captive bottom plate. This is where the trouble comes from. In a hard roll, with out the captive lower plate the nuts on the bottom side of the floor can just pull through the sheet metal. With our 4x Innovations kit you would have to pull through 6 4x6 inch plates. Another great benifit to have the lower captive plate is that if you wish to mount the cage to the frame you can still do so with out having to cut large holes in your floor. Simply install the cage, bolt up the plates and weld frame tie ins to the bottom plate, paint and done.

fillsrunner4 · 05-26-2008, 11:34 AM

Quote:

Originally Posted by traxman25

fillsrunner, Do you even know how it mounts to the floor? Have you ever seen our cage after a hard roll? I have, and it was defiantly NOT useless.

Our cages tie into the floor at 6 points with wide mounting plates and 4 bolts each. We also give the extra plates to use place on the underside of the floor. This spreads the force out over a large area, and holds the floor captive on BOTH sides. Other cages, like what Fillsrunner thinks he's talking about, use much smaller mounting plates and do not provide the captive bottom plate. This is where the trouble comes from. In a hard roll, with out the captive lower plate the nuts on the bottom side of the floor can just pull through the sheet metal. With our 4x Innovations kit you would have to pull through 6 4x6 inch plates. Another great benifit to have the lower captive plate is that if you wish to mount the cage to the frame you can still do so with out having to cut large holes in your floor. Simply install the cage, bolt up the plates and weld frame tie ins to the bottom plate, paint and done.

I wasnt trying to take from your guys cage im sure its great but if you want your cage to work to its max potential which is to save your life it is a great idea to tie into the frame. Yes I have seen rollovers with and without cages and many different stye cages. I would never put one in my truck without it to the frame and thats my opinion and a highly recommended one at that. This is to save your life and im sure its strong I just wanted to point out the fact you should ALWAYS tie a cage into the frame. Its good to know your cage has bigger plates and outer plates but dont you think you should chill out and think about what I said first before you flame me thinking I dont know how these cages work and are installed. Safety first right and all I said is it should go to the frame. Do you not agree with that just because you have 6 plates???

traxman25 · 05-26-2008, 11:48 AM

I didn't say it wasn't a good idea. You are getting flamed for posting you opinion in a for sale thread.

If you're that keen on tying it to the frame the I sure can send you the tubing to do so. Call the shop at 1-608-348-4880 if you'd like to chat about it.

traxman25 · 09-12-2008, 01:24 PM

back to the top, thanks!

traxman25 · 10-12-2008, 07:25 AM

Keepin er on the page, thanks!

traxman25 · 11-18-2008, 08:53 AM

Here's some pics of the 2nd Gen 4 Runner (90-95) cage, part number 6RIC (HREW) and 6RIC-D (DOM)

See the first post for more details about the cage.

traxman25 · 02-09-2009, 07:56 PM

More pics of 6RIC!!

Please view the first post in this thread for details. A few of the posts were edited with new pictures and information on 2/9/09. Thanks for looking!!

89silverpu · 02-09-2009, 08:03 PM

Just curious, is it still possible to remove the dash with one of these installed?

traxman25 · 02-09-2009, 08:07 PM

Quote:

Originally Posted by 89silverpu

Just curious, is it still possible to remove the dash with one of these installed?

In a first gen yes.

ozziesironmanoffroad · 02-09-2009, 08:10 PM

curious, do you make a cage for a 88 4x4 pickup single cab? if so how much?

traxman25 · 02-09-2009, 08:33 PM

Quote:

Originally Posted by ozziesironmanoffroad

curious, do you make a cage for a 88 4x4 pickup single cab? if so how much?

Yep sure do! $400+ shipping.

02-10-2008, 08:14 AM	#2 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	Pictures: 4RIC - Passenger Length 84-89 4 Runner Roll Cage Pictures: 5RIC - Full Length 84-89 4 Runner Roll Cage Attached Thumbnails __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam- Last edited by traxman25; 02-09-2009 at 07:39 PM.

03-13-2008, 08:52 AM	#3 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	Pictures: 5RIC - Full Length 84-89 4 Runner Roll Cage Attached Thumbnails __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam- Last edited by traxman25; 02-09-2009 at 07:49 PM.

03-13-2008, 10:32 AM	#4 (permalink)
waskillywabbit Super Moderator-Sponsoring Member Staff Join Date: Jul 2003 Location: Tuscaloosa, AL Posts: 14,546	__________________ WabFab Off-Road, LLC MySpace Twitter Facebook 7th Annual South East 4Runner Jamboree, 2010 The toughest part of a Jeep is the chick driving it. WabFab Off-Road 4th Anniversary Sale Last edited by waskillywabbit; 03-13-2008 at 11:35 AM.

03-13-2008, 04:13 PM	#5 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	Thanks Brian, I'll get your cage out soon. Nice ass btw. __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam-

03-14-2008, 08:45 AM	#7 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	2nd gen 4 Runner yes, but I have no idea on a time frame as of right now. Not sure on the pickup, I have to find one I can use for that. __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam-

03-13-2008, 07:57 PM	#6 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,782	Hey are you guys developing one for a 2nd gen? Looks sick!

03-14-2008, 09:00 AM	#8 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,782	Cool, i will be looking into one when its out. Not that i do anything hardcore, but at least with a cage ill have a better chance of not dieing if it rolls!

05-25-2008, 06:59 PM	#9 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	I should have Cages for 2nd Gen runners in the next week or two. __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam-

05-25-2008, 07:04 PM	#10 (permalink)
LTrunner Registered User Join Date: Mar 2007 Location: spfld, MA Posts: 394	not ready for a cage YET, but how do they mount to the floor? __________________ 1989 4runner 3.0L,5spd swaped,Marlin HD clucth,v6 to gear t-case,dual case x-member,chevy 63's,1" blocks,u-blot flip,shock trianglation,Marlin rear bumper,sliders,1"body lift,soft top,welded rear,steelies,33"BFG MTs,SAS frt w/ RUF--->http://www.yotatech.com/f116/my-very...runner-143762/ Destination...OFF ROAD

05-25-2008, 07:07 PM	#11 (permalink)
Hayes Registered User Join Date: Apr 2006 Location: Aurora, CO Posts: 1,884	Those are sweet, when I am ready for my cage...you will be the first to know. __________________ Obama is an acronym. OBAMA = One Big Ass Mistake, America

05-25-2008, 07:10 PM	#12 (permalink)
waskillywabbit Super Moderator-Sponsoring Member Staff Join Date: Jul 2003 Location: Tuscaloosa, AL Posts: 14,546	I am "almost" finished getting mine put in this weekend...gotta finish welding some of it out and adding some bracing to the frame, but for the most part it is done. __________________ WabFab Off-Road, LLC MySpace Twitter Facebook 7th Annual South East 4Runner Jamboree, 2010 The toughest part of a Jeep is the chick driving it. WabFab Off-Road 4th Anniversary Sale

05-26-2008, 11:48 AM	#17 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	I didn't say it wasn't a good idea. You are getting flamed for posting you opinion in a for sale thread. If you're that keen on tying it to the frame the I sure can send you the tubing to do so. Call the shop at 1-608-348-4880 if you'd like to chat about it. __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam- Last edited by traxman25; 05-26-2008 at 12:09 PM.

09-12-2008, 01:24 PM	#18 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	back to the top, thanks! __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam-

10-12-2008, 07:25 AM	#19 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	Keepin er on the page, thanks! __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam-

11-18-2008, 08:53 AM	#20 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	Here's some pics of the 2nd Gen 4 Runner (90-95) cage, part number 6RIC (HREW) and 6RIC-D (DOM) See the first post for more details about the cage. Attached Thumbnails __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam- Last edited by traxman25; 02-09-2009 at 07:52 PM.

02-09-2009, 08:03 PM	#22 (permalink)
89silverpu Registered User Join Date: Feb 2007 Location: Vacaville/Sierra Nevada Mountains, CA/ UNLV (Las Vegas), NV Posts: 1,689	Just curious, is it still possible to remove the dash with one of these installed? __________________ '89 Beater Jeep Eater in progress 4.88's, TRD e-locker, Dual Cases, 33's, Armored, Tread Lightly Mixchallenge.info

02-09-2009, 07:56 PM	#21 (permalink)
traxman25 Registered User Join Date: Aug 2006 Location: Platteville, WI Posts: 154	More pics of 6RIC!! Please view the first post in this thread for details. A few of the posts were edited with new pictures and information on 2/9/09. Thanks for looking!! Attached Thumbnails __________________ 4x Innovations - Quality Custom Toyota based tube products at a fair price Phone @ 1-608-348-4880 Check out the 87 Runner trail rig. -Adam- Last edited by traxman25; 02-09-2009 at 07:58 PM.

02-09-2009, 08:10 PM	#24 (permalink)
ozziesironmanoffroad Registered User Join Date: Sep 2007 Location: Spring Valley, CA Posts: 5,676	curious, do you make a cage for a 88 4x4 pickup single cab? if so how much? __________________ The 22r series engines are made from the fires of hell, and will fight tooth and nail to not be sent back. 1988 Toyota P/U 4x4 22re, 1200 miles on the rebuild engine builder .268 cam pioneer CD deck 31x10.50x15 BFG A/T BAJA 100W lights on prerunner bumper KC Daylighters 100W rancho rs5000 MUD IS A VALID PAINT JOB! If not living life to the fullest, why live it? my trucks official buildup thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tube doors for Toyotas from 4x Innovations!	traxman25	Vendor Advertising	26	09-18-2009 11:17 AM
4x Innovations wants your rig!	traxman25	General Vehicle Related Topics (Non Year Related)	43	03-01-2009 03:32 PM
FJ40 Mods (Need pic of bumpers and cages)	powerwagon67	The Fab Shop	0	04-11-2007 08:01 PM
Bolt In Cages?	Yota Tony	General Vehicle Related Topics (Non Year Related)	7	03-12-2007 07:05 PM
All you need to make roll cages...	FSRBIKER	95.5-2004 Tacomas & 96-2002 4Runners	0	07-22-2004 07:35 PM