aa1911's '08 Sequoia SR5 4x4 and 5.7L monster machine
#81
Didn't get to the dual battery yet but decided to at least start with a simple Blue sea systems on/off switch for now. Battery was getting old, so replaced with a marine battery and decided to add the switch. I do like the extra screw terminals on the battery, pretty handy when I get around to adding more toys to this thing.
Hodge podge of 2 gauge cable and terminals wound up making it look pretty good, a bit overkill but better bigger than smaller. The stock 6 gauge or whatever is pretty weak. Eventually will get around to doing all the major connections with heavier gauge wire.
Heat shrink tubing is awesome, can't get enough... covers up my shotty soldering jobs...
Hodge podge of 2 gauge cable and terminals wound up making it look pretty good, a bit overkill but better bigger than smaller. The stock 6 gauge or whatever is pretty weak. Eventually will get around to doing all the major connections with heavier gauge wire.
Heat shrink tubing is awesome, can't get enough... covers up my shotty soldering jobs...
#84
Unfortunately I am still running stock shocks/suspension; once I get enough dollars, I will probably put the Bilstein coilovers up front ($6-700) and custom rear shocks, not sure what yet. I did get as far as ordering custom rear springs that raise it 2" in the back, and plan to set coilovers up front to 2.5" setting.
So rear springs in hand, still working on the rest! Really not much issue though with the stock front end and bumper weight.
So rear springs in hand, still working on the rest! Really not much issue though with the stock front end and bumper weight.
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
Suprarossa
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
07-06-2015 05:21 AM