scuba's 1999 Tacoma Build-Up Thread
#43
lookin good man. I'm liking the bob a lot. I haven't seen a taco like yours bobed before and it's sick fo sho man. I like the tube doors too. I'm thinking about gettin me some of those for my runner. lol. I dunno why everyone likes half doors so much i like tube doors a lot.
#44
Registered User
Thread Starter
The bumper is now black, as is the bed bob area..
Did the corner blinker mod shortly after this picture..
http://www.youtube.com/watch?v=GivcJPsxUMA
I ended up with skid row skids.
did the clutch back in december, thank you Marlin crawler for the clutch and Tony for the helping hand
Quick disco mudflaps
Got some 5.29's, Now running lockrights front and rear..
And I wheeled AZrocks, Camped havasu, and wheeled Aftershock at The Hammers all for spring break
Aftershock Video
http://blip.tv/file/3416309#id3435654
I dont have any pictures of me on Aftershock, but there are some pictures of my friends here
More AzRocks pics and videos here
My junk is close to being an IFS DD Raisin. I have body damage on all but one body panel (the front drivers fender, I don't count the hood or roof). Not proud of it, just saying.
I'm sure I'm going 35's next. I'll have a 1" BL and plenty of cutting to do to fit those.. Crawl box will most likely be before the 35's, and eventually I'm sure I'll end up cutting the IFS off...
That is all
Did the corner blinker mod shortly after this picture..
http://www.youtube.com/watch?v=GivcJPsxUMA
I ended up with skid row skids.
did the clutch back in december, thank you Marlin crawler for the clutch and Tony for the helping hand
Quick disco mudflaps
Got some 5.29's, Now running lockrights front and rear..
And I wheeled AZrocks, Camped havasu, and wheeled Aftershock at The Hammers all for spring break
Aftershock Video
http://blip.tv/file/3416309#id3435654
I dont have any pictures of me on Aftershock, but there are some pictures of my friends here
More AzRocks pics and videos here
My junk is close to being an IFS DD Raisin. I have body damage on all but one body panel (the front drivers fender, I don't count the hood or roof). Not proud of it, just saying.
I'm sure I'm going 35's next. I'll have a 1" BL and plenty of cutting to do to fit those.. Crawl box will most likely be before the 35's, and eventually I'm sure I'll end up cutting the IFS off...
That is all
#49
Registered User
Thread Starter
Just poking my head in to update my build thread and whatnot..
For sure, like I said it's turning into a raisin but at least it gets used.
Thanks
Thanks
#51
Registered User
Thread Starter
So I've got a few little projects to post..
The rear diff breather..
I installed a "yellow box" speedo calibrator (works like a charm)
I JUST got done installing some scion TC seats. Soo much nicer on the lower back and they even sit a tad higher. Awesome for a short fellow like myself.
And I've got a rear bumper in progress. Nothing special, just the usual.
And some cool rig shots
Watch out for da rocks !
Sorry 56K users
The rear diff breather..
I installed a "yellow box" speedo calibrator (works like a charm)
I JUST got done installing some scion TC seats. Soo much nicer on the lower back and they even sit a tad higher. Awesome for a short fellow like myself.
And I've got a rear bumper in progress. Nothing special, just the usual.
And some cool rig shots
Watch out for da rocks !
Sorry 56K users
#53
Registered User
iTrader: (1)
you JUST installed those tC seats didnt you??
and what did you have to do to install them?? i actually have a friend with 2 layin around that i can probably score for cheap...
also, can you send me some info and tips on the bob?? im planning on douing that in a few weeks...
and what did you have to do to install them?? i actually have a friend with 2 layin around that i can probably score for cheap...
also, can you send me some info and tips on the bob?? im planning on douing that in a few weeks...
#54
Registered User
Thread Starter
LOL I hope not, for their sake.
I had finished installing the seats like 2 hours before I posted that.
I had to cut the mounting feet off of my Tacoma seats (making the taco seats useless) and do the same for the scion seats while making sure I didn't mess up the rails. Then welded them up and done!
I'll send you some info on the bob later. I'm posting this on the iPhone
you JUST installed those tC seats didnt you??
and what did you have to do to install them?? i actually have a friend with 2 layin around that i can probably score for cheap...
also, can you send me some info and tips on the bob?? im planning on douing that in a few weeks...
and what did you have to do to install them?? i actually have a friend with 2 layin around that i can probably score for cheap...
also, can you send me some info and tips on the bob?? im planning on douing that in a few weeks...
I had to cut the mounting feet off of my Tacoma seats (making the taco seats useless) and do the same for the scion seats while making sure I didn't mess up the rails. Then welded them up and done!
I'll send you some info on the bob later. I'm posting this on the iPhone
#56
Registered User
Thread Starter
I know its destined to happen.. and I'm not going to fight it..
I just started researching SAS stuff.. reading stuff on pirate... adding up numbers..
I'll be aiming for something like this..
Not sure what axle I want to use (either an fj80 axle or a Waggy44)
37's.. Minus the huge front bumper
Axle pushed forward a couple inches.. leafs not links..
It won't be a DD after that. I'm looking into getting a motorcycle at the moment..
Think I'm going to just start buying parts every pay check..
I have not reached the limits of my IFS. But I'm pretty sure there will come a day. And I want to be ready for it
I'll be aiming for something like this..
Not sure what axle I want to use (either an fj80 axle or a Waggy44)
37's.. Minus the huge front bumper
Axle pushed forward a couple inches.. leafs not links..
It won't be a DD after that. I'm looking into getting a motorcycle at the moment..
Think I'm going to just start buying parts every pay check..
I have not reached the limits of my IFS. But I'm pretty sure there will come a day. And I want to be ready for it
#59
Registered User
Thread Starter