Notices
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section) Post your build-ups here

#cheaprunner in tn

Thread Tools
 
Search this Thread
 
Old 09-12-2015, 05:20 PM
  #1  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
#cheaprunner in tn

ok, background. been into wheeling for 15+ yrs. iv had samurais, and yota trucks. a couple months ago i bought a 96 4runner that had a run in with an 18wheeler for $750. crushed the driver side door jamb pretty good. i bought it without hearing it run, but the guy swore it did when parked 2+ yrs before. my intentions was to pull the 3.4 and use it in my 94 ext cab. fast foward to present day.....i put a fuel pump in and it cranked right up, and it drove straight. so i pulled the jamb back out, i still have to pull the b pillar about another 1/2". put a door and fender on it. pulled the factory bumpers, running boards, and plastic flares, etc. i just ordered a set of 32x11.50 bfg t/a km2's. its been a long time since i did a build up on a forum, so bear with me while i refresh my memory on uploading pic, etc.

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150321_162335_resized_3_zps60bfbcc5.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150321_162335_resized_3_zps60bfbcc5.jpg" border="0" alt=" photo 20150321_162335_resized_3_zps60bfbcc5.jpg"/></a>
Old 09-12-2015, 05:25 PM
  #2  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
so skip forward a lil, i made a plate with attachment points and pulled the jamb out, and put a door and fender on it.

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150902_112134_resized_3_zps862b054d.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150902_112134_resized_3_zps862b054d.jpg" border="0" alt=" photo 20150902_112134_resized_3_zps862b054d.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150829_170406_resized_2_zps60472699.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150829_170406_resized_2_zps60472699.jpg" border="0" alt=" photo 20150829_170406_resized_2_zps60472699.jpg"/></a>
Old 09-12-2015, 05:33 PM
  #3  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
so i played around near the house, building my confidence in it it since i put the fuel pump in, and got it running. 2+ yr old gas sux! low rpms is fine, if you roll hard into the throttle, it sputters, and you can smell the aged fuel.

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150904_182131_resized_2_zps942e5d13.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150904_182131_resized_2_zps942e5d13.jpg" border="0" alt=" photo 20150904_182131_resized_2_zps942e5d13.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150904_190233_resized_2_zpsf2df2539.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150904_190233_resized_2_zpsf2df2539.jpg" border="0" alt=" photo 20150904_190233_resized_2_zpsf2df2539.jpg"/></a>
Old 09-12-2015, 05:39 PM
  #4  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
sooo, the door and fender i bought were both off of newer models, which meant the fender flare, and lower door trim had the clips which required holes through the panels. soo, i welded all the holes up, and stripped the running boards, flares, and the rest of the unneeded panels off of it

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150904_223913_resized_2_zps5aacbeb2.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150904_223913_resized_2_zps5aacbeb2.jpg" border="0" alt=" photo 20150904_223913_resized_2_zps5aacbeb2.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150904_223908_resized_2_zpsf8a702f8.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150904_223908_resized_2_zpsf8a702f8.jpg" border="0" alt=" photo 20150904_223908_resized_2_zpsf8a702f8.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150906_145019_resized_1_zpsdc47150b.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150906_145019_resized_1_zpsdc47150b.jpg" border="0" alt=" photo 20150906_145019_resized_1_zpsdc47150b.jpg"/></a>
Old 09-12-2015, 05:43 PM
  #5  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
i pulled what was left of the mangled rear bumper off of it, and decided to drive it for a week back and forth to work to help burn out the 3/4 tank of fuel out. i forgot how much i liked the 4runners

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150907_124046_resized_1_zpseebf3e4a.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150907_124046_resized_1_zpseebf3e4a.jpg" border="0" alt=" photo 20150907_124046_resized_1_zpseebf3e4a.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150908_090754_resized_1_zps915ecffe.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150908_090754_resized_1_zps915ecffe.jpg" border="0" alt=" photo 20150908_090754_resized_1_zps915ecffe.jpg"/></a>
Old 09-12-2015, 05:48 PM
  #6  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
at this point i decided i'm gonna make this into the #cheaprunner. gonna try to build a cheap, but capable trail vehicle/wheeler, as well as a daily driver back and forth to work. very hard for me to do, it usually starts this way, and ends up a cut up trailer queen. so far im in for $915, not too bad i also added a couple stickers to set the mood for the build

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150907_141239_resized_1_zps8917c58a.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150907_141239_resized_1_zps8917c58a.jpg" border="0" alt=" photo 20150907_141239_resized_1_zps8917c58a.jpg"/></a>
Old 09-12-2015, 05:59 PM
  #7  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
i wanted a roof basket for the #cheaprunner, to mount the highlift jack and the pare tire to...... soo i picked up some 1/2" pipe and some 16 guage plate, and some hammertone black rattle can paint. i ended up with just under $100 in the basket. total soo far $1015?

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150911_151253_resized_1_zpsa561703b.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150911_151253_resized_1_zpsa561703b.jpg" border="0" alt=" photo 20150911_151253_resized_1_zpsa561703b.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150911_153912_resized_1_zpsbca96e62.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150911_153912_resized_1_zpsbca96e62.jpg" border="0" alt=" photo 20150911_153912_resized_1_zpsbca96e62.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150911_170444_resized_1_zpse83953a4.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150911_170444_resized_1_zpse83953a4.jpg" border="0" alt=" photo 20150911_170444_resized_1_zpse83953a4.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150911_191858_resized_1_zps542818e5.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150911_191858_resized_1_zps542818e5.jpg" border="0" alt=" photo 20150911_191858_resized_1_zps542818e5.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150911_201214_resized_zps284378a5.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150911_201214_resized_zps284378a5.jpg" border="0" alt=" photo 20150911_201214_resized_zps284378a5.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150912_153632_resized_1_zpsd56c8659.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150912_153632_resized_1_zpsd56c8659.jpg" border="0" alt=" photo 20150912_153632_resized_1_zpsd56c8659.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150912_153647_resized_zpsaca0a5d4.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150912_153647_resized_zpsaca0a5d4.jpg" border="0" alt=" photo 20150912_153647_resized_zpsaca0a5d4.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150912_154945_resized_1_zps9d9ef6f8.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150912_154945_resized_1_zps9d9ef6f8.jpg" border="0" alt=" photo 20150912_154945_resized_1_zps9d9ef6f8.jpg"/></a>
Old 09-12-2015, 06:06 PM
  #8  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
i got bored and decided to hammertone the wheels also to match the roof basket, and the bumpers that will be happening soon. i also ordered a set of 32x11.50 bfg km2's

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150912_201847_resized_1_zpse97f5714.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150912_201847_resized_1_zpse97f5714.jpg" border="0" alt=" photo 20150912_201847_resized_1_zpse97f5714.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/2015-09-12-22-04-16-1145582535_resized_zps7b146f7c.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/2015-09-12-22-04-16-1145582535_resized_zps7b146f7c.jpg" border="0" alt=" photo 2015-09-12-22-04-16-1145582535_resized_zps7b146f7c.jpg"/></a>
..........soon..........
Old 09-13-2015, 05:32 AM
  #9  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
i forgot to throw in the cost of the battery, which was $115, and the cost of the km2's which was $777 shipped to the door. total cost at this point is .........................$1907.00
Old 09-13-2015, 07:09 AM
  #10  
Super Moderator
Staff
iTrader: (1)
 
Terrys87's Avatar
 
Join Date: Aug 2008
Location: Anderson Missouri
Posts: 11,788
Likes: 0
Received 21 Likes on 19 Posts
You are getting it to look like a 4Runner again. Great job!!!
Old 09-13-2015, 11:55 AM
  #11  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
thanks terrys87, doesnt look like there is much traffic on here. im used to the old suzuki forums being busy all the time anyway, the score for today........ a factory elocker and 2 elocker ecu's from the local pullapart. $86

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150913_125959_resized_zps41b993c9.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150913_125959_resized_zps41b993c9.jpg" border="0" alt=" photo 20150913_125959_resized_zps41b993c9.jpg"/></a>

<a href="http://s1310.photobucket.com/user/sunnyvzr1/media/20150913_151425_resized_zpsf4b64bbf.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s643/sunnyvzr1/20150913_151425_resized_zpsf4b64bbf.jpg" border="0" alt=" photo 20150913_151425_resized_zpsf4b64bbf.jpg"/></a>
Old 09-13-2015, 05:31 PM
  #12  
Registered User
 
881stGenRunner's Avatar
 
Join Date: Mar 2006
Location: Atlanta, GA
Posts: 2,584
Received 7 Likes on 4 Posts
wow super lucky find on the diff and ECUs! If i could find that deal, omg it would be amazing/
Old 09-14-2015, 06:18 AM
  #13  
Registered User
Thread Starter
 
94toyy's Avatar
 
Join Date: Feb 2015
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 881stGenRunner
wow super lucky find on the diff and ECUs! If i could find that deal, omg it would be amazing/
The pullaparts have a set price on individual parts. Every once in a while I luck up on a deal. So far the door, fender, and elocker have all came from pull apart. Iv gotta check and see what gear is in my #cheaprunner and what gear is in the elocker. The elocker has the factory pink on the pinion nut, anyone know which gear that is?



All times are GMT -8. The time now is 10:20 PM.