20ozjolt `s 1999 tacoma Build-Up Thread
#1
Registered User
Thread Starter
20ozjolt `s 1999 tacoma Build-Up Thread, "Daisy"
Well I just got my new truck on Monday.
This is my first Toyota PU... and my first post.
4wd`s I have had are 1975 Jeep J-10, 1986 Jeep Cherokee, 1996 Dodge Dakota, 2001 GMC 3500 standard cab, oh ya and a 1980`s Kabota farm tractor....
It came just about how I would like it but there is always more to do...
I`m sure ill need to add more to this list but
current/ how it came to me:
2.7L 4cyc
stick shift of coarse
GemTop canopy
3" lift ToyTec (spacers front Spring rear)
33x12.5R15 `s
rhino lined bed
custom bumpers front and rear
HID headlights
PIAA lights front
CB
custom battery mount/ oversize battery
Warn 9000i wench with in cab controls
Done:
replace damaged canopy window
add front receiver
Lowered rear bumper to clear tailgate
Built and installed 3/16 steal front plate
front fenders trimmed 1"
rear fenders trimmed 2"
mudflaps and added license plate light (temp ones done tell i build my rear bumper)
tubbed firewall for 35`s
current to do`s: (not in order)
build sleeping platform / storage system
build new rear bumper
Add 1-2" to bumpstops
on board air (scrapped co2 plan)
front fender flairs
synthetic wench rope
add Rock sliders
replace skid plates
add locker rear
replace rear springs
Future to do`s:
more lights
replace or repair tailgate
add more speakers
pull bed off truck and bed line the underside
change out gears to 4.88
replace front lift to get rid of spacers... looking / dreaming of chaos control arm / fox extend travel coils
roll cage, at least on cab
replace seats --- this one is only because I want the Baja SS buckets
This is my first Toyota PU... and my first post.
4wd`s I have had are 1975 Jeep J-10, 1986 Jeep Cherokee, 1996 Dodge Dakota, 2001 GMC 3500 standard cab, oh ya and a 1980`s Kabota farm tractor....
It came just about how I would like it but there is always more to do...
I`m sure ill need to add more to this list but
current/ how it came to me:
2.7L 4cyc
stick shift of coarse
GemTop canopy
3" lift ToyTec (spacers front Spring rear)
33x12.5R15 `s
rhino lined bed
custom bumpers front and rear
HID headlights
PIAA lights front
CB
custom battery mount/ oversize battery
Warn 9000i wench with in cab controls
Done:
replace damaged canopy window
add front receiver
Lowered rear bumper to clear tailgate
Built and installed 3/16 steal front plate
front fenders trimmed 1"
rear fenders trimmed 2"
mudflaps and added license plate light (temp ones done tell i build my rear bumper)
tubbed firewall for 35`s
current to do`s: (not in order)
build sleeping platform / storage system
build new rear bumper
Add 1-2" to bumpstops
on board air (scrapped co2 plan)
front fender flairs
synthetic wench rope
add Rock sliders
replace skid plates
add locker rear
replace rear springs
Future to do`s:
more lights
replace or repair tailgate
add more speakers
pull bed off truck and bed line the underside
change out gears to 4.88
replace front lift to get rid of spacers... looking / dreaming of chaos control arm / fox extend travel coils
roll cage, at least on cab
replace seats --- this one is only because I want the Baja SS buckets
Last edited by 20ozjolt; 08-06-2013 at 10:58 AM.
#3
Registered User
Thread Starter
adding a receiver to the front bumper...
need to sand blast and paint when the weather changes (unheated barn) in the mean time i will be building a new plate for the front out of 3/16 a36 steel.
New plate mounted.
future front end modifications are in flux...
need to sand blast and paint when the weather changes (unheated barn) in the mean time i will be building a new plate for the front out of 3/16 a36 steel.
New plate mounted.
future front end modifications are in flux...
Last edited by 20ozjolt; 07-12-2013 at 06:47 PM.
#4
Registered User
Thread Starter
#5
Registered User
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
WTB[PacNorWest]: WTB - Tacoma/4runner 3.4 Charcoal canister and igniter
94whiterunner
Items Wanted
0
07-12-2015 07:15 PM